IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET151141                                                     


Effects of Starch Content and Compatibilizer on the Mechanical, Water Absorption and Biodegradable Properties of Potato Starch filled Polypropylene Blends

Authors(6):

Obasi, H. C., Egeolu, F. C., Ezenwajiaku, H. I.
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Tensile, water absorption and biodegradable properties of potato starch filled polypropylene blends have been investigated. Polypropylene grafted maleic anhydride (PP-g-MA) was used as compatibilizer. It was observed that the tensile strength and elongation at break are inversely related to the starch content but Young’s modulus followed a direct relationship with the starch content. However, the addition of PP-g-MA to the blends improved the tensile strength and elongation at break even though they were still lower than the neat polymer but the Young’s modulus increased progressively. This is as a result of the enhanced interfacial bonding between the starch and matrix which can be proved by the SEM images. The tensile strength and elongation at break of the compatibilized blends increased by 30.59%; 42.62% and 23.36%; 24.62% in comparison with the uncompatibilized blends at 10 wt.% and 50 wt.% respectively. The percent water absorbed and weight loss of the PS/PP were higher than the CPS/PP blends due to poor interfacial bonding. Biodegradation products of the blends showed no deleterious effects on the growth of plants.

Obasi, H. C., Egeolu, F. C., Ezenwajiaku, H. I.

Potato starch, Polypropylene, Compatibilizer, Tensile properties, Water absorption, Weight loss.

'

 [1]. Gasper M.,  Benko Z.,  Dogossy G., Reczeyk. and Czigany T. (2005). Reducing water absorption        in compostable starch-based plastics. Polym. Degrad. Stab., 90(3), 563-569.

 

[2]. Bogoeva-Gaceva G.,  Avella M.,  Malinconico M., Buzarovska A., Grodanov A., Gentile G. and Errico M.E. (2007). Natural fibre eco-composites. Polym.  Compos. 28(1), 98-107.

[3]. Fama L; Flores S.K, Gerschenson L. and Goyanes S. (2006).  Physical characterization of cassava starch biofolms with special reference to dynamic mechanical properties at low temperatures, Carbohyd. Polym., 66(1), 8-15.

[4]. Teixeira E.M.,  Pasquini D., Curvelo A.A.S., Corradini E.,  Belgacem M.N. and Dufresne A. (2009). Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch. Carbohyd.  Polym. 78 (3), 422-431.

[5]. Pranamuda H.,  Tokiwa Y, and Tanako H. (1996).  Physical properties and biodegradability of blends containing poly (e-caprolactone) and tropical starches. J. Environ. Polym. Degrad. 4, 1-7.

[6]. Lawton J.W. and Fanta G.F.  (1994). Glycerol plasticized films from starch-poly (vinyl alcohol) mixtures: effect of poly (ethylene-co-acrylic acid). J. Carbohyd. Polym. 23:275-280.

[7]. Swanson C.L; Shrogren R.L; Fanta G.F. and Iman S.H. (1993).  Starch-plastic materials-preparation, physical properties and biodegradability (A review of   recent USDA  research). J. Environ. Polym. Degrad. 2:155-66.

[8]. Koenig M.F. and Huang S.J. (1995). Biodegradable blends and composites of polycaprolactine/gelatinized starch blends and their enzymatic degradation, 437-441.

[9]. Takagi S., Koyama M., Kameyama H. and Tokiwa Y. (1994).  Development of polycaprolactone/gelatinized starch blends and their enzymatic degradation, 437-441.

[10]. Otey H.F. and Doane M.W. (1984). In Starch: Chemistry and Technology, 2nd ed.: Whistler R.L., BemillerJ.M., Paschal E.F.,Eds, Academic press, New York. 389.

[11]. Kotnis M.A., O’Brien G.S. and Willett J.L. (1995).  Processing and mechanical properties of biodegradable poly (hydroxybutrate-co-valerate)-starch compositions. Environ. Polym. Degrad. 3,   97.

[12]. Funke U., Bergthaller W. and Lindhauer M.G. (1998).  Processing and characterization of biodegradable product based on starch. Polym. Degrad. Stab; 59(1-3), 293-296.

[13]. Arcana I.M.,Bunbun B.,Iyan Y.,Budiati J. and Lenggana S. (2007). Study on properties of polymer blends from polypropylene with polycaprolactone and their biodegradability. Polym. J; 39(12), 1337-1344.

[14]. Chung T.C. and Rhubright D. (1993). Functionalization of polypropylene by hydrocarbons.  J. Polym. Sci; Part A: Polym. Chem.; 31(11), 2759-2763.

[15]. Waryat, Romli M., Suryani A.,Yuliasih, I. and Johan S. (2013). Using of a compatibilizer to improve morphological, physical and mechanical properties of biodegradable plastic from thermoplastic starch/LLDPE blends Int. J. Eng. Tech. 13 (1), 115-122.

[16]. Brent A.N, Michael A.T.,Venkata S.C. and Chad A.U. (2012). Processing and characterization, of a polypropylene biocomposite compounded with maleated and acrylated compatibilizers. Int. J. Polym. Sci,

[17]. Obasi H.C. and Igwe I.O.(2014) . Effects of native cassava starch and compatibilizer on biodegradable and tensile properties of polypropylene. American J. Eng. Res. 3(2), 96-104.

[18]. Rosa D.S., Guedes C.G.F. and Carvalho C.l. (2007).  Processing and thermal, Mechanical and morphological characterization of post-consumer polyolefins/thermoplastics starch blends. J. Mater. Sci., 42, 551-557.

[19]. Wahab M.A; and Mottabeb M.A. (2001). Mechanical properties and water absorption of rice starch-filled LLDPE. Korean Polym. J., 9(6), 297- 302.

[20]. Wu C. (2003). Physical properties and biodegradability of maleatedpolycaprolactone/starch composite. Polym.Degrad. Stab; 80, 127-134.

[21]. Bikiaris D; Pavlidou E., Prinos J. Alric I.,Borredon E. and Panayiotou C. (1998). Biodegradation of octanoated starch and its blends with LDPE. Polym. Degrad. Stab., 60, 437-447.  

[22]. Kale G., Kijchavengkul T., Auras R., Rubino M; Selk S.E. and Singh S.P. (2007).  Compostability of bioplastic packaging materials. An Overview. Maoromol. Biosci; 7(3),   225-277.         

[23]. Willet J.L. (1994). Mechanical properties of LDPE/granular starch composites. J. Appli.         Polym. Sci; 54, 1685-1695.

'

Publication Details

Published in : Volume 1 | Issue 1 | January-Febuary - 2015
Date of Publication Print ISSN Online ISSN
2015-02-25 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
190-196 IJSRSET151141   Technoscience Academy

Cite This Article

Obasi, H. C., Egeolu, F. C., Ezenwajiaku, H. I., "Effects of Starch Content and Compatibilizer on the Mechanical, Water Absorption and Biodegradable Properties of Potato Starch filled Polypropylene Blends", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 1, Issue 1, pp.190-196, January-Febuary-2015.
URL : http://ijsrset.com/IJSRSET151141.php