IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET151359                                                     


Simulation & Analysis of A 3-Phase 4-Wire System for Evaluation & Mitigation of PQ Problem using Unified Power Quality Conditioner

Authors(2):

Gajendra Singh, Harpreet Singh
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Electric power is the most essential raw material impacting the bottom line of quality production economically on a commercial scale. It can’t typically be stored like other commodities and is essentially required with continuous flow all the time. Electric power can be visualized as the epitome of ‘just in time’ philosophy used like the components delivered to a production line by a trusted and approved supplier with no facility for ‘pre-inspection’. Now a day due to increased use of power electronic device at the distribution level the efficiency and reliability of supply being supplied to consumers is deteriorating. The increased voltage sag, voltage swell, flicker and other power quality problem attract the attention of consumer toward quality of power being supplied to them. Increased PQ problems leads to increased power loss, malfunctioning of electrical equipment and large financial loss, therefore the issue need quick attention. In this paper an effort is made by author to resolve the voltage and current related issues with application of Unified Power Quality Conditioner in the preinstalled distribution networks where design change is not possible. The author used Direct Torque Controlled Induction Motor Drive as a nonlinear load and constant impedance RL load as linear one in a 3-phase, 4-wire distribution system and compared the results with and without use of UPQC

Gajendra Singh, Harpreet Singh

Power Quality, Voltage sag, Voltage swell, DTC induction motor drive, Interruption, UPQC

  1. S. Sivanagaraju, “Electrical Power Transmission and Distribution”, Pearson Education, Dorling Kindersley (India) Pvt. Ltd., ISBN: 978-81-317-0791-3, 2009.
  2. J.B.Dixit, Amit Yadav, “Electrical Power Quality”, University Science Press, India, 2010.
  3. N.G. Hingorani, "High Power Electronics and Flexible AC Transmission Systems," IEEE Power Engineering Review, Vol. 8, No. 7, July 1988, pp. 3-4
  4. N. Mohan, T.M. Undeland, W.P. Robbins, “Power Electronics: Converters, Applications, and Design”, John Wiley & Sons, New York, 1989.
  5. S. Banerjee, G.C. Verghese, “Nonlinear Phenomena in Power Electronics”, IEEE Press, New York, 2001.
  6. C. Shankaran, Power Quality, CRC Press LLC, New York, 2002.
  7. F. S. Gabrio “On compensation strategies for active filtering in power network” IEEE press, Milano, Italy.
  8. E. A. Mertens Jr., L. F. S. Dias, F. A. Fernandes, “Evaluation and Trends of Power Quality Indices in Distribution System” 9th international conference on Electrical Power Quality and Utilization, Barcelona, , Page(s):1-6, 7-9 October 2007.
  9. H. Siahkali,” Power Quality Indexes for Continue and Discrete Disturbances in a Distribution Area” 2nd IEEE International Conference on Power and Energy (PECon 08), December 1-3, 2008, Johor Baharu, Malaysia
  10. Y. Hyunjae, S.K. Seung “A New Circuit Design and Control to Reduce Input Harmonic Current for a Three-phase AC Machine Drive System having a very Small DC-link Capacitor” IEEE Press, 978-1-4244-4783-1, 2010.
  11. M. W. Sharad, A.V.Mohan “A STATCOM-Control Scheme for Grid Connected Wind Energy System for Power Quality Improvement” IEEE Journal, VOL. 4, NO. 3, September 2010, ISBN1932-8184.
  12. G.R. Sudharshan, K.K.Vijay “Unified Power Quality Conditioner (UPQC) During Voltage Sag and Swell” VSRD-IJEECE, Vol. 2 (8), 2012, 545-565, ISSN 2231-3346.
  13. V.Khadkikar “Enhancing Electric Power Quality Using UPQC: A Comprehensive Overview” IEEE transaction on Power Electronics, Vol. 27, NO. 5, May 2012.
  14. K.W.Lao, N.Y.Dai, W.G.Liu, M.C.Wong “Hybrid Power Quality Compensator With Minimum DC Operation Voltage Design for High-Speed Traction Power Systems”, IEEE Transaction on Power Electronics, Volume 28, No. 4, April 2013,PP 2025-2034
  15. K. Srivani, A. Rajalaxmi “Review of UPQC Control Techniques for Power Quality Improvement”, International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882, Volume 3, Issue 1, April 2014
  16. P.Prasad, Md. Khaja Jainuddin, Y.Rambabu, V.K.R.Mohan Rao “Unified Power Quality Conditioner (UPQC) With Storage Device for Power Quality Problems” International Journal of Engineering And Science, Vol.3, Issue 8 (September 2013), PP 19-26, ISSN(e): 2278-4721, ISSN(p):2319-6483,
  17. J. L. Afonso, H. J. Ribeiro da Silva, J. S. Martins “Active Filters for Power Quality Improvement” IEEE Porto Power Tech, 10-13 Set. 2001, Porto, Portugal, ISBN: 0-7803-7139-9
  18. R.K. Rao, G.R. Kumar, S.S.Tulasiram “Harmonic Analysis of 6-pulse Converter in DTC Induction Drives using UPQC” International Journal of Scientific & Engineering Research Volume 2, Issue 10, October-2011, ISSN: 2229-5518.
  19. M. Tarafdar Haque, and S.H. Hosseini, “A Control Strategy for Unified Power Quality Conditioner (UPQC) using Instantaneous Symmetrical Component Theory”, Conference on Proceedings of Power Electronics Specialists, Vol. 1, Page(s): 94 - 98, June 2002.
  20. C. Benachaiba and B. Ferdi “Power Quality Improvement Using DVR”, American Journal of Applied Sciences 6 (3): 396-400, 2009, ISSN 1546-9239
  21. R V D Rama Rao, Subhransu Sekhar Dash “Enhancement of Power Quality by using Unified Power Quality Conditioner with PID and Fuzzy Logic Controller” International Journal of Computer Applications (0975 8887) Volume 5 No.7, August 2010.
  22. P. Kondala Rao and K. Vimala Kumar “Custom Power Improvement in Distribution Systemby Open UPQC” International Journal of Science and Research (IJSR), ISSN (Online): 2319-7064.
  23. Mojtaba Nemati, Hesam Addin Yousefian and Rouhollah Afshari, “Recognize the Role of DVR in Power Systems”, International Journal of Recent Trends in Engineering, Vol. 2, Page(s): 13 - 15, November 2009.
  24. B. Singh, K. Al-Haddad and A. Chandra “A Review of Active Filters for Power Quality Improvement” IEEE Transaction on Industrial Electronics, Vol. 46, No. 5, October 1999.
  25. V. Khadkikar and A. Chandra “A New Control Philosophy for a Unified Power Quality Conditioner (UPQC) to Coordinate Load-Reactive Power Demand Between Shunt and Series Inverters”, IEEE Transaction on Power Quality Vol.3, NO. 4, October 2008.
  26. B. Singh, S. Gairola, B.N.Singh, A.Chandra and K.Al-Haddad “Multipulse ACDC Converters for Improving Power Quality: A Review”, IEEE Transaction on Power Quality, Vol. 23, No. 1, January 2008
  27. B.B.Ambati and V. Khadkikar “Optimal Sizing of UPQC Considering VA Loading and Maximum Utilization of Power-Electronic Converters”, IEEE Transaction on Power delivery, Vol. 29, No. 3, June 2014.
  28. S.Rajeev, “IUPQC Simulation for Power Quality Improvement”, International Journal of Engineering Research, Volume No.3, Issue No.40, ISSN:2319-6890)(online), 01 April 2014, pp : 261-264
  29. IEEE, "IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems," IEEE Std. 519-1992, revision of IEEE Std. 519-1981.

Publication Details

Published in : Volume 1 | Issue 3 | May-June - 2015
Date of Publication Print ISSN Online ISSN
2015-06-25 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
246-254 IJSRSET151359   Technoscience Academy

Cite This Article

Gajendra Singh, Harpreet Singh, "Simulation & Analysis of A 3-Phase 4-Wire System for Evaluation & Mitigation of PQ Problem using Unified Power Quality Conditioner", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 1, Issue 3, pp.246-254, May-June-2015.
URL : http://ijsrset.com/IJSRSET151359.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)