Theoretical Analysis of Journal Bearing With Nanolubricants

Authors

  • Tushar P. Gundarneeya  Mechanical Engineering Department, Government Engineering College, Dahod, Gujarat, India

Keywords:

Journal Bearing, Nanolubricants, Load Carrying Capacity, Reynolds Equation, Sommerfeld & Reynolds Boundary Condition.

Abstract

Fluid bearings are frequently used in high load, high speed or high precision applications where ordinary ball bearings have short life or high noise and vibration. The investigation of nanotribology shows that the nanoparticles have unique property in lubrication and tribology, such as anti-wear, reducing friction, and high load capacity. There were some investigations on the tribological properties of lubricants with different nanoparticles added, and it was reported that the addition of nanoparticles to lubricant oil is effective anti-wear and reducing-friction performances. Recent experiments have revealed that addition of nanoparticles on lubricants results in better viscosity as compared to that of oils without addition of nanoparticles. Furthermore, these suspended solid particles in the commercial lubricants affect the load carrying capacity and other performance characteristics of journal bearings. In this paper Load Carrying capacity of Journal Bearing is studied by considering Sommerfeld and Reynolds boundary conditions. Solution of two dimensional Reynolds equation is done using Finite difference method and graph is obtained with help of MATLAB. Different combination of nanopartical concentration is taken and it had been found that by addition of nanopartical, higher the concentration of nanopartical results in high viscosity, High friction coefficient, high pressure distribution and ultimately high load carrying capacity of journal bearing.

References

  1. Hernandez Battez, J.L. Viesca, Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coating, Wear 268 (2010) 325-328
  2. Binu K.G., Shenoy B.S., Rao D.S.,A variable Viscosity Approach for the Evaluation of load Carrying Capacity of oil lubricated Journal Bearing with TiO2 Nanoparticles as lubricant Additives, Procedia Materials Science 6 ( 2014 ) 1051 - 1067
  3. S. Shenoy, K.G. Binu, R. Pai, D.S. Rao, Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing, Tribology International 45 (2012) 38-42
  4. Chau-Chang Chou, Szu-Hsien Lee, Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy, Wear 269 (2010) 757-762 Da Jiao, Shaohua Zheng, The tribology properties of alumina/silica composite nanoparticles as lubricant Additives, Applied Surface Science 257 5720-5725
  5. Dalai Jin, Linhai Yue, Tribological properties study of spherical calcium carbonate composite as lubricant additive, Materials Letters 62 (2008) 1565-1568 Fuyan Zhao, Zhimin Bai, Ying Fu, Tribological properties of serpentine, La(OH)3 and their composite particles as lubricant additives, Wear 288 (2012) 72- 77
  6. Gholamreza Vakili-Nezhaad, Akram Dorany, Effect of Single-Walled Carbon Nanotube on the Viscosity of Lubricants, Energy Procedia 14 (2012) 512 - 517 H.L. Yu, Y. Xu, Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive, Tribology International 43 (2010) 667-675
  7. Hsiao Yeh Chu, Wen Chen Hsu, The anti-scuffing performance of diamond nano-particles as an oil additive, Wear 268 (2010) 960-967
  8. Jaekeun Lee, Sangwon Cho, Yujin Hwang, Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces, Tribology International 42 (2009) 440-447
  9. Juozas Padgurskas, Raimundas Rukuiza, Tribological properties of lubricant additives of
  10. Fe, Cu and Co nanoparticles, Tribology International 60 (2013) 224-232
  11. Kwangho Lee, Yujin Hwang, Seongir Cheong, Performance evaluation of nano-lubricants
  12. of fullerene nanoparticles in refrigeration mineral oil, Current Applied Physics 9 (2009)
  13. e128-e131
  14. Chang, Z. Zhang, Y. Xu, PJ. Shi, Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive, Tribology International 43 (2010) 667-675
  15. M.           Kalin, J. Kogovsek, M. Remskar, Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives, Wear 280- 281 (2012) 36­45
  16. M.A. Maleque, H.H. Masjuki, Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant, Wear 239 _2000. 117-125
  17. Sreedhar Babu Kalakada, Prabhakaran Nair Kumarapillai, Rajendrakumar Krishnan Perikinalil, Analysis of Static and Dynamic Performance Characteristics of THD Journal Bearing Operating Under lubricants Containing Nanoparticles, International Journal of Precision Engineering and Manufacturing Vol. 13, No. 10, pp. 1869-1876, October 2012
  18. Salmiah Kasolang, Mohamad Ali Ahmada, Preliminary study of Pressure Profile in Hydrodynamic Lubrication Journal Bearing, Procedia Engineering 41 ( 2012 ) 1743 - 1749 Yanli Yao, Xiaomin Wang, Junjie Guo, Tribological property of onion-like fullerenes as lubricant additive, Materials Letters 62 (2008) 2524-2527
  19. Y.Y. Wu, W.C. Tsui, T.C., Experimental analysis of tribological properties of lubricating oils with nanoparticle additives, Wear 262 (2007) 819-825
  20. Yoshitsugu Kimura, H.H. Masjuki, Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant, Wear 239 _2000. 117-125 Yanli Yao, Xiaomin Wang, Junjie Guo, Tribological property of onion-like fullerenes as lubricant additive, Materials Letters 62 (2008) 2524-2527
  21. Zhang Bao-Sen, Xu Bin-Shi, Xu Yi, CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel-steel contacts, Tribology International 44(2011)878-886
  22. The Principle of Lubrication" by A Cameron, Longman Green & Co.Ltd. 1966 Basic Lubrication Theory" by Alstair Cameron, Longman Green &Co.Ltd.1981 Principle of Tribology" by J Halling, 1978
  23. Engineering Tribology" by G.W. Stachowiak & A.W.Batchlor, Elsevier Science Publsiher ,1993
  24. Engineering Tribology" by J.A. Williams ,1994

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2015-06-25

Issue

Volume 1, Issue 3, May-June-2015

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Tushar P. Gundarneeya, " Theoretical Analysis of Journal Bearing With Nanolubricants, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 1, Issue 3, pp.365-371, May-June-2015.