International Journal of Scientific Research in Science, Engineering and TechnologyPrint ISSN : 2395-1990 Online ISSN : 2394-4099 firstname.lastname@example.org
 N.N.V.SurendraBabu and B.G .Fernandes, “Cascaded Two-Level Inverter-Based Multilevel STATCOM for High-Power Applications” IEEE Publications, Feb. 2014.
 B. Singh, R. Saha, A. Chandra, and K. Al-Haddad, “Static synchronous compensators (STATCOM): A review,” IET Power Electron., vol. 2, no. 4, pp. 297–324, 2009.
 H. Akagi, H. Fujita, S. Yonetani, and Y. Kondo, “A 6.6-kV transformerless STATCOM based on a five-level diode-clamped PWM converter: System design and experimentation of a 200-V 10-kVA laboratory model,” IEEE Trans. Ind. Appl., vol. 44, no. 2, pp. 672–680, Mar./Apr. 2008.
 A. Shukla, A. Ghosh, and A. Joshi, “Hysteresis current control operation of flying capacitor multilevel inverter and its application in shunt compensation of distribution systems,” IEEE Trans. Power Del., vol. 22, no. 1, pp. 396–405, Jan. 2007.
 H. Akagi, S. Inoue, and T. Yoshii, “Control and performance of a transformerless cascaded PWM STATCOM with star configuration,” IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 1041–1049, Jul./Aug. 2007.
 Y. Liu, A. Q. Huang, W. Song, S. Bhattacharya, and G. Tan, “Small-signal model-based control strategy for balancing individual dc capacitor voltages in cascade multilevel inverter-based STATCOM,” IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2259–2269, Jun. 2009.
 H. P. Mohammadi and M. T. Bina, “A transformerless medium-voltage STATCOM topology based on extended modular multilevel converters,” IEEE Trans. Power Electron., vol. 26, no. 5, pp. 1534–1545, May 2011.
 X. Kou, K. A. Corzine, and M. W. Wielebski, “Overdistention operation of cascaded multilevel inverters,” IEEE Trans. Ind. Appl., vol. 42, no. 3, pp. 817–824, May/Jun. 2006.
 K. K. Mohaptra, K. Gopakumar, and V. T. Somasekhar, “A harmonic elimination and suppression scheme for an open-end winding induction motor drive,” IEEE Trans. Ind. Electron., vol. 50, no. 6, pp. 1187–1198, Dec. 2003.
 Y. Kawabata, N. Yahata, M. Horii, E. Egiogu, and T. Kawabata, “SVG using open winding transformer and two inverters,” in Proc., 35th An-nual IEEE Power Electron. Specialists Conf., 2004, pp. 3039–3044.
 S. Ponnaluri, J. K. Steinke, P. Steimer, S. Reichert, and B. Buchmann, “Design comparison and control of medum voltage STATCOM with novel twin converter topology,” in Proc., 35th Annu. IEEE Power Electron. Specialists Conf., 2004, pp. 2546–2550.
 N. N. V. SurendraBabu, D. Apparao, and B. G. Fernandes, “Asymmetrical dc link voltage balance of a cascaded two level inverter based STATCOM,” in Proc., IEEE TENCON, 2010, pp. 483–488.
 IEEE Criteria for Class IE Electric Systems, IEEE Standard 141-1993.
 C. Schauder and H. Mehta, “Vector analysis and control of advanced static VAR compensators,” in Proc. Inst. Elect. Eng. C., Jul. 1993, vol. 140, no. 4, pp. 299–305.
 D. G. Holmes and T. A. Lipo, “IEEE series on power engineering,” in
 Pulse Width Modulation for Power Converters: Principles and Practice. Piscataway, NJ, USA: IEEE, 2003.
 B. Blazic and I. Papic, “Improved D-statcom control for operation with unbalanced currents and voltages,” IEEE Trans. Power Del., vol. 21, no. 1, pp. 225–233, Jan. 2006.
 A. Leon, J. M. Mauricio, J. A. Solsona, and A. Gomez-Exposito, “Soft-ware sensor-based STATCOM control under unbalanced conditions,” IEEE Trans. Power Del., vol. 24, no. 3, pp. 1623–1632, Jul. 2009.
 Y. Suh, Y. Go, and D. Rho, “A comparative study on control algorithm for active front-end rectifier of large motor drives under unbalanced input,” IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 825–835, May/Jun. 2011.
 F. Z. Peng and J. S. Lai, “A static var generator using a staircase Proc. modeling of dc systems and power electronics for transmission systems,’’ IEEE 95 WM 272-5 P WRD.
 D. A. Woodford and R. W. Menzies, “Controlling a back-to-back waveform PCIWPower Quality, 1994, pp. 58-66. J. S. Lai and F. Z. Peng, “Power converter options for power system compatible mass transit systems,’’ in Proc. PCIMMass Transit System Compatibility, 1994, pp. 285-294. S.
 Choi, .G. C. Cho, and G. H. Cho, “Modeling and analysis of a static var compensator using multilevel voltage source inverter,“ in Conj Rec. IEEWIASAnn. Mtg., 1993, pp. 901-908. C.
 Hochgraf, R. Lasseter, D. Divan, and T. A. Lipo, “Comparison of multilevel inverters for static var compensation,” in Conj Rec. IEEWIASAnn. Mtg., 1994, pp. 921-928.
 M. Carpita and S. Teconi, “A novel multilevel structure for voltage source inverter,” in Proc. EPE 1991, pp. 90-94.
 F. Z. Peng and J. S. Lai, “A multilevel voltage-source inverter with separate dc sources,’’ in press, to be presented in IEEE/IAS Annual Meeting 1995.
 F. Z. Peng and T. Fukao, “A multilevel inverter for static var generator applications,” in Journal ofJapan IEE 1994.
 F. Z. Peng, J. S. Lai, J. W. McKeever, and J. VanCOevering, ”A multilevel voltage-source converter system with balanced dc voltages,” in press, to be presented in Electronics Specialists Conference (PESC), Jun., 1995.
 S. Lefebvre, A. M. Gole, J. Reeve, Bhattacharya, “Working group on dynamic performance and multilevel voltage-source converter,” in link to operate as a phase shift transformer,” CIGRE 1994, Paper 14-202.
 M. Bahman, et al., “Integration of small taps into existing HVDC links,” I995 WM273-3 [I31 A. Nabae, clamped PWM inverter,” IEEE Trans. Industry Applications, Vol. No. 5, Sep./Oct., N. PWRD.
 Takahashi, and H. Akagi, “A new neutral-point- 1. L4-17, 1981, pp. 518-523.
 P. M. Bhagwat and V. R. Stefanovic, “Generalized structure of a multilevel PWM inverter,” IEEE Trans. Industry Applications, Vol. 19, No 6, Nov./Dec. 1983, pp. 1057-1069.
 L.Walker, “10-MW GTO converter for battery peaking service,” IEEE Trans. Industry Applications, vol. 26, no. 1, Jan./Feb., 1990, pp. 63-72.
Cite This Article
S. Sabarisan, Dr. R. Subramanian, C. Ramakrishnan , "Improved Multi-String Inverter –Based STATCOM for High-Power Applications", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 1, Issue 2, pp.162-167, March-April-2015.
URL : http://ijsrset.com/IJSRSET152260.php
Copyright @ 2017 - International Journal of Scientific Research in Science, Engineering and Technology