IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET162124                                                     


Study of the effect of machining parameters and Analysis of the wear characteristics of an EDM by ANOVA’s Techniques

Authors(4):

Krishan Kant, Parveen Tyagi, Umesh Gupta, Shiv Kumar
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Electric discharge machining (EDM) is one of the maximum commonly used nontraditional processes for making accurate intricate shapes on hard materials like die steels and is most preferred process to be followed for die and mold making. In this research work, Experiment plan has been designed using Taguchi technique to study the effect of different parameters and their levels by conducting least number of experiments. Based on this L18 orthogonal array is been used. As the most popularly used material in die and mold casting industries are the die steels hence for this work AISI H11 die steel are used as the workpiece material for slot cutting. Effort has been made to find out the optimum machining conditions by varying process parameters like current, powder to be suspended in dielectric, its concentration, tool material and pulse-on duration at three levels with and without using external magnetic field. The results are analyzed using analysis of variance (ANOVA) both analytically and graphically. Significant factors affecting the output parameters have been found using F-test and percentage contribution. From the experimental investigation copper tool followed by C18000 tool has been found to give the best MRR results and high tool wear, whereas tungsten tool has been found to give the least MRR accompanied by least tool wear. The dimensional accuracy of the tools in terms of corner wear, side wear and overcut has also been studied.

Krishan Kant, Parveen Tyagi, Umesh Gupta, Shiv Kumar

Electric discharge machining, Taguchi technique, L18 orthogonal array, AISI H11 die steel.

  1. Aas K.L. (2004) Performance of two graphite electrode qualities in EDM of seal slots in a jet engine turbine vane. Journals of Materials Processing Technology 149:152-156.
  2. Batish A., Bhattacharya A. (2012) Mechanism of Material Deposition from Powder ,Electrode and Dielectric for Surface Modification of H11 and H13 die steels in EDM Process. Material Science Forum, 701:61-75.
  3. Bhattacharya A., Batish A. (2012) Surface Modification of Carbon High Chromium , EN31 and Hot Die Steel using Powder Mixed EDM Process. Material Science Forum 701:43-59.
  4. Bhattacharya A., Batish A., Singh G. (2011) Optimization of Powder Mixed Electric discharge Machining using Dummy treated Experimental Design with Analytic Hierarchy process. Proceedings of Institution of Mechanical Engineers, Part – B: Journal of Engineering Manufacture, 226:103–116.
  5. Bhattacharya A., Batish A. (2011) Optimal Parameter Settings for Rough and Finish machining of die steels in powder- mixed EDM. International Journal of Advanced Manufacturing Technology, 011:3716

Publication Details

Published in : Volume 2 | Issue 1 | January-Febuary - 2016
Date of Publication Print ISSN Online ISSN
2016-02-25 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
186-195 IJSRSET162124   Technoscience Academy

Cite This Article

Krishan Kant, Parveen Tyagi, Umesh Gupta, Shiv Kumar, "Study of the effect of machining parameters and Analysis of the wear characteristics of an EDM by ANOVA’s Techniques ", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 1, pp.186-195, January-Febuary-2016.
URL : http://ijsrset.com/IJSRSET162124.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)