IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET162174                                                     


Thermodynamic and Dynamic Analysis of Four-Cylinder Crankshaft

Authors(3):

Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
In this paper, dynamic analysis of four-cylinder crankshaft has been studied using theoretical and numerical methods. Crankshaft is large volume production component with a complex geometry in the Internal Combustion (I.C) Engine. This converts the reciprocating displacement of the piston into a rotary motion of the crank. The objective of this paper is to analyze the kinematics and dynamics of the crankshaft and compare the theoretical with Solidworks Motion results. Kinematics is the study of motion without regard for the forces that cause the motion. A kinematic analysis is conducted before dynamic behavior of the mechanism can be simulated properly. Dynamic analysis is the study of motion in response to externally applied loads. The dynamic behavior of a mechanism is governed by Newton’s second laws of motion. The main target of dynamics analysis is to compute the values of inertia forces. The calculated values and the simulation results of inertia forces are nearly the same. The maximum percentage error is less than 20 %. Moreover, the output torque of engine at 2000 rpm is nearly 180 N-m. The manufacturer specification data for output torque at 2000 rpm is 192 N-m. So, the deviation between simulation result and manufacturer specification data is 6.25 %. The kinematic parameter of the mechanism are: the linear displacements, the linear velocity and the linear acceleration of the piston.

Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win

Acceleration, Crankshaft, Displacements, Dynamic analysis, Velocity.

  1. Y. Gongzhi, Y. Hongliang, D. Shulin, (2011), “Crankshaft Dynamic Strength Analysis for Marine Diesel Engine” Third International Conference on Measuring Technology and Mechatronics Automation, pp. 795-799.
  2. G. Yingkui, Z. Zhibo, (2011), “Strength Analysis of Diesel Engine Crankshaft Based on PRO/E and ANSYS”.
  3. P.G student, Research Paper, Design and Analysis of Crankshaft for Single Cylinder Four Stroke Diesel Engine.
  4. P.G Student, Modeling and Analysis of the Crankshaft Using Ansys Software.
  5. http://www.universaldexteritygroup.com.
  6. Khovakh, M.1976. Motor Vehicle Engine. MIR Publishers-Moscow.
  7. Shigley, Joseph Edward, (1988), Theory of Machines and Mechanisms, McGraw-Hill Book Co. Singapore.

Publication Details

Published in : Volume 2 | Issue 1 | January-Febuary - 2016
Date of Publication Print ISSN Online ISSN
2016-02-29 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
438-445 IJSRSET162174   Technoscience Academy

Cite This Article

Aung Ko Latt, Zin Ei Ei Win, Htay Htay Win, "Thermodynamic and Dynamic Analysis of Four-Cylinder Crankshaft", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 1, pp.438-445, January-Febuary-2016.
URL : http://ijsrset.com/IJSRSET162174.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)