IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET1622432                                                     


Investigation of the Effect of Fused Deposition Process Parameter on Compressive Strength and Roughness Properties of Abs-M30 Material

Authors(2):

Gaurav Shah, Arpan Shah
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
The process parameters of FDM manufacturing technology is very important for obtaining high quality parts, good mechanical properties. Several optimization techniques used such as Response surface methodology, Taguchi method, FF, ANN etc. much research work has been carried out in ABS, PC, PPSF, Nylon-12, PC-ABS blend for optimizing process parameters to identify improved surface roughness, mechanical properties and built-up time.

Gaurav Shah, Arpan Shah

FDM, Taghuchi method, built up time

    1. Ahn Sung Hoon, Montero Michael, Odell Dan, Roundy Shad, Wright Paul K. (2002). Anisotropic material properties of fused deposition modelling ABS, Rapid prototyping journal, 8 (4): 248-257 .
    2. Omar A. Mohamed, Syed H. Masood, Jahar L. Bhowmik, Optimization of fused deposition modeling process parameters: a review of current research and future prospects .
    3. Mohammad Shojib Hossain, Jorge Ramos, David Espalin, Improving Tensile Mechanical Properties of FDM-Manufactured Specimens via Modifying Build Parameters.
    4. Constance Ziemian , Improving Tensile Mechanical Properties of FDM-Manufactured Specimens via Modifying Build Parameters.
    5. Dr. K. G. Dave , An Experimental Investigation of Effect of Process Parameters on Surface Roughness of Fused Deposition Modeling Built Parts.
    6. S.Dinesh Kumar,  Parameter Optimization of ABS-M30i Parts Produced by Fused Deposition Modeling for Minimum Surface Roughness.
    7. M Alhubail, Taguchi-based Optimisation of Process Parameters of Fused Deposition Modelling for Improved Part Quality.
    8. Investigation on the effect of Fused Deposition Modeling Process Parameters on Flexural Surface Roughness properties of PC-ABS blend.  S. Manikandan, V. Prabhu Raja.
    9. Parametric Optimization of Fused Deposition Modeling Process in Rapid Prototyping Technology in ABS-M30 Mr. Vishal N. Patel, Mr. Kamlesh P. Kadia.
    10. Experimental investigation and empirical modelling of FDM process for compressive strength improvement in ABS-400 materials.A.K. Sood ,R.K. Ohdar, S.S.Mahapat.

    Web Site

    • http://www.worldscibooks.com/engineering/6665.html
    • http://en.m.wikipedia.org/wiki/fused_deposition_modeling
    • http://en.m.wikipedia.org/wiki/Taguchi_method

    Books 

    • Pulak M.pandey "Rapid Prototyping Technologies, Application and Part Deposition planning" Department of mechanical engineering Indian institute of technology Delhi.(2009)
    • "CAD-CAM & Rapid prototyping application evaluation" reverse engineering & rapid prototyping  download free eBooks at bookboon.com
    • "Meet Minitab 17", A Minitab 17 software guide
    • H.Theil, Principles of Econometrics 622-27(1971); G.Chow, Econometrics 320-47(1983)
    • Techniques for the estimation of non linear regression have been developed. See, e.g G.Chow, supra note 9, at 220-51
    • R.K. Roy "A primer on Taguchi method", Van Nostrand Reinhold, Newyork U.S.A. p.p. 101 -103.

Publication Details

Published in : Volume 2 | Issue 2 | March-April - 2016
Date of Publication Print ISSN Online ISSN
2016-05-05 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
1289-1296 IJSRSET1622432   Technoscience Academy

Cite This Article

Gaurav Shah, Arpan Shah, "Investigation of the Effect of Fused Deposition Process Parameter on Compressive Strength and Roughness Properties of Abs-M30 Material", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 2, pp.1289-1296, March-April-2016.
URL : http://ijsrset.com/IJSRSET1622432.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)