IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET1623109                                                     

Experimental Investigation to Minimize Tool Wear by Cryogenic Treatment


Dr. N Nandakumar
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
The high speed steel is used as a cutting tool, since it has good quality and reliability at cheaper rate when compared to other cutting tools. So it is very important to increase the ability of the tool further for its reliability. So the best way is to increase the hardness. We have brainstormed to find out alternate tool materials. One novel method namely dipping the ordinary tool bit in a cryogenic solution, which improves the wear properties of the cutting tool consequently machining time is also reduced. Cryogenic treatment of high speed steel is one of the developments in manufacturing field. It offers much better wear resistance and hardness for the high speed steel. The conventional cryogenic treatment process involves cooling down the samples to 93k (-180c) soaking for 12 seconds and then slowly heating back to room temperature. In this experimental investigation a sequence of methodology is adopted to arrive at an optimum solution having two sample pieces of round of EN8 & EN19. A method called deep cryogenic process, subjects steel components placed in a specially constructed tank to temperature around 77k (196c) for half an hour using liquid nitrogen as the refrigerant.

Dr. N Nandakumar

Cryogenic treatment, sub-zero temperatures, tool wear

  1. Dhar NR, Paul S, Chattopadhyay AB,  “Machining of AISI 1045 steel under cryogenic cooling – tool wear, surface roughness and dimensional deviations”, Journal of Materials Processing Technology, 2002, 123, 483-489.
  2. Seah KHW, Rahim M, Yong KH, “Performance evaluation of cryogenically treated tungsten carbide cutting inserts”, Proc. Inst.Mech.Eng. Part B: J Eng Manuf. 2003, 217: 29-43
  3. Jha, A.R. “Cryogenic Technology and Applications” Butterworth-Heinemann: Oxford, UK, 2006; 1–21.
  4. Timmerhaus, K.D.; Reed, R.P. “Cryogenic Engineering” Springer: New York, USA, 2007; 3–27.
  5. Baldissera, P.; Delprete, C. “Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel”, Materials and Design, 2009, 30, 1435–1440.
  6. Gordon, P.; Cohen, M. “The transformation of retained austenite in high speed steel at sub atmospheric temperatures” Transactions of the ASM 1942, 30, 569–588
  7. A.A. Khan, M.Y. Ali and M.M. Haque “A new approach of applying cryogenic coolant in turning AISI 304 stainless steel” International Journal of Mechanical and Materials Engineering , 2010,Vol.5, No.2, 171-174
  8. Das, D.; Dutta, A.K.; Ray, K.K. “Influence of varied cryo-treatment on the wear behavior of AISI D2 steel” Wear 2009, 266, 297–309.
  9. Moore, K.; Collins, D.N. “Cryogenic treatment of three heat treated steels” Key Engineering. Material. 1993, 86–87, 47–54.
  10. Collins, D.N.; Dormer, J. “Deep cryogenic treatment of a D2 cold-worked tool steel” Heat Treat. Met. 1997, 24 (3), 71–74.
  11. S.S. Gill, R. Singh, H. Singh, J. Singh, “Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions”, Int. J. Mach. Tools Manuf. 2009, 256–260
  12. Pellizzari M., Molinari A., Girardini L., Maldarelli L. “Deep Cryogenic Treatment of AISI M2 High-speed Steel”, Int J Micro- struct Mater Prop, 2008, 3(2-3), 383-390.
  13. A. Akhbarizadeh, A. Shafyei, M.A. Golozar; “Effects of cryogenic treatment on wear behavior of D6 tool steel”; Materials and Design , 2009, pp 3259–3264.
  14. Yong, A.Y.L., Seah, K.H.W., Rahman, M., Performance evaluation of cryogenically treated tungsten carbide tools in turning, Int. J. Mach. Tools Manuf., vol. 46, 2004, pp. 2051–2056.
  15. Seah,K.H.W, Rahman, M., Yong, K.H.,Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts, Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf., vol. 217, 2003, pp. 29-43.
  16. Reddy, T.V.S., Sornakumar, T., Reddy, M.V., Venkataram, R., Senthilkumar, A. Turning studies of deep cryogenic treated p-40 tungsten carbide cutting tool inserts. Technical Communication .J. Mach Sci tech. vol. 13, 2009, pp. 269- 281
  17. F. Farhani, K.S. Niaki “Cryogenic treatment of metals–a review of experimental studies, underlying mechanism and process equipment” Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, Dhaka, Bangladesh, 27-29, 2008.
  18. Muammer Nalbant, Yakup Yildiz “Effect of cryogenic cooling in milling process of AISI 304 stainless steel” Trans nonferrousMet soc.China 21,72-79, 2011.

Publication Details

Published in : Volume 2 | Issue 3 | May-June - 2016
Date of Publication Print ISSN Online ISSN
2016-06-30 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
389-392 IJSRSET1623109   Technoscience Academy

Cite This Article

Dr. N Nandakumar, "Experimental Investigation to Minimize Tool Wear by Cryogenic Treatment ", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 3, pp.389-392, May-June-2016.
URL : http://ijsrset.com/IJSRSET1623109.php


Search Your Article