IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET1625125                                                     


3D Point cloud/Map generation using DIY Board

Authors(5):

Sanket Deshpande, Chaitanya Shinde, Veerendra Risbud, Santosh Avhad, Atul H. Shintre
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
There are ample number of surveillance systems which can provide only 2D environment representation using video or images as output. But if we can utilise the available technology of 3D point cloud generation to represent the surrounding in a 3D it could create more accurate representation and depth perception of the surrounding. We are using Kinect/stereo cameras for input as well as ultrasonic rangefinders for collision avoidance. A point cloud is a set of data points in some coordinate system. In a three-dimensional coordinate system, these points are usually defined by X, Y, and Z co-ordinates, and often are intended to represent the external surface of an object. Point clouds may be created by 3D scanners. These devices measure a large number of points on an object's surface, and often output a point cloud as a data file. The point cloud represents the set of points that the device has measured. As the result of a 3D scanning process point clouds are used for many purposes, including to create 3D CAD models for manufactured parts, metrology/quality inspection, and a multitude of visualization, animation, rendering and mass customization applications. Rangefinders for collision avoidance. A point cloud is a set of data points in some coordinate system. In a three-dimensional coordinate system, these points are usually defined by X, Y, and Z co-ordinates, and often are intended to represent the external surface of an object. Point clouds may be created by 3D scanners. These devices measure a large number of points on an object's surface, and often output a point cloud as a data file. The point cloud represents the set of points that the device has measured. As the result of a 3D scanning process point clouds are used for many purposes, including to create 3D CAD models for manufactured parts, metrology/quality inspection, and a multitude of visualization, animation, rendering and mass customization applications.

Sanket Deshpande, Chaitanya Shinde, Veerendra Risbud, Santosh Avhad, Atul H. Shintre

3D Point cloud, Kinect, Stereoscopy, Octomap

  1. Sebastian Thrun, Wolfram Burgard, Dieter Fox, A Real-Time Algorithm for Mobile Robot Mapping With Applications to Multi-Robot and 3D Mapping, Best Conference Paper Award IEEE International Conference on Robotics and Automation, San Francisco, April 2000
  2. Radu Bogdan Rusu and Steve Cousins Willow Garage, 3D is here: Point Cloud Library (PCL)
  3. Armin Hornung, Kai M. Wurm , Maren Bennewitz, CyrillStachniss, Wolfram Burgard, OctoMap: An Efficient Probabilistic 3D Mapping Framework Based on Octrees, Received: 30 April 2012 / Accepted: 31 December 2012, Autonomous Robots (2013) Preprint, final version available at DOI 10.1007/s10514-012-9321-0
  4. Armin Hornung Joint work with K.M. Wurm,  Bennewitz, C. Stachniss, W. Burgard, 3D Mapping with OctoMap.
  5. Martin S. Banks, Jenny C. A. Read, Robert S. Allison, and Simon J. Watt, Stereoscopy and the Human Visual System, SMPTE Motion Imaging Journal May/June 2012
  6. Tzung-Han Lin, Resolution adjustable 3D scanner based on using stereo cameras, Graduate Institute of Color and Illumination Technology,National Taiwan University of Science and Technology, Taiwan
  7. Richard Schubert, Stereoscopic Scanner in Quality Control, Reprint, Proc. Conf. 'Quality Control by Artificial Vision', Trois-Rivières, Québec., Canada, May 1999

Publication Details

Published in : Volume 2 | Issue 5 | September-October - 2016
Date of Publication Print ISSN Online ISSN
2016-10-31 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
469-472 IJSRSET1625125   Technoscience Academy

Cite This Article

Sanket Deshpande, Chaitanya Shinde, Veerendra Risbud, Santosh Avhad, Atul H. Shintre , "3D Point cloud/Map generation using DIY Board", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 5, pp.469-472, September-October-2016.
URL : http://ijsrset.com/IJSRSET1625125.php