IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET162567                                                     


Buckling Analysis of Laminar Composite Plates with Cutouts

Authors(2):

Dilu Riswana C., Dr. Sabeena. M. V.
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Laminated composite plates are made up of plates consisting of layers bonded together and made up of materials chemically different from each other but combined macroscopically. In structures, holes provided in laminated composite plate show reduction in strength, stiffness and inertia. The optimization and nonlinear behavior on the effect of various parameters on the buckling load of square and cylindrical laminated plates with and without cut-outs. Cutouts are necessary to serve the purpose of weight reduction, venting and attachments to other units for the cable to pass through are so on. The parameters considered are cut-out location, fiber orientation angle, length to thickness ratio, boundary condition and Young’s Modulus Ratio. The analyzed laminated plates are of carbon fiber reinforced composite materials. Laminated composite plate with circular cutout shows a decrease in buckling load than plates without cutout.

Dilu Riswana C., Dr. Sabeena. M. V.

Buckling Analysis, Finite Element Method, Circular Cutouts, Carbon Fibre, Laminated Composite Plate

  1. Parth Bhavsar, Prof. Krunal Shah, Prof. Sankalp Bhatia, “An overview of buckling analysis of single ply composite plate with cut-outs”. International Journal of Engineering Research and General Science Volume 2, Issue 5, August-September, 2014 ISSN 2091-2730
  2. Joshi A, Ravinder Reddy P, Krishnareddy V.N, Ch.V.Sushma, “Buckling analysis of thin carbon/epoxy plate with circular cut-outs under biaxial compression by using fea”. IJRET: International Journal of Research in Engineering and Technology, (2013) eISSN: 2319-1163 | pISSN: 2321-7308
  3. Nagendra Singh Gaira, Nagendra Kumar Mourya and Rakesh Kumar Yadav, “Linear buckling analysis laminar composite plate”. International journal of engineering science and advanced technology(2012) volume 2, Issue :4
  4. Hamidreza Allahbakhsh and Ali Dadrasi, “Buckling Analysis of laminated composite panel with Elliptical cut-out subjected to axial compression”. Volume 2012, Article ID 171953, 10 pages.
  5. Bucket Okutan Baba (2007), “Buckling Behaviour of Laminated Composite Plates”. Canakkale Onsekiz Mart University / Turkey
  6. Hsuan-Teh Hu, Chia-Hao Yang, Fu-Ming Lin, “Buckling analysis of composite laminate skew plate with material non-linearity”. Science direct composites: Part B 37, (2006) 26-36.

Publication Details

Published in : Volume 2 | Issue 5 | September-October - 2016
Date of Publication Print ISSN Online ISSN
2016-10-30 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
250-254 IJSRSET162567   Technoscience Academy

Cite This Article

Dilu Riswana C., Dr. Sabeena. M. V., "Buckling Analysis of Laminar Composite Plates with Cutouts", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 5, pp.250-254, September-October-2016.
URL : http://ijsrset.com/IJSRSET162567.php