IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET162695                                                     

Design and Simulation of Bimorph Piezoactuated Micro Blower


Konduru Venkata Gopinadh, P. Mariya Kumar, K. Velmurugan
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Advances in the field of avionics have resulted in a significant increase in density Integration, clock rates, and emerging trend of miniaturization of modern electronics. This resulted in dissipation of high heat flux at the chip level. In order to satisfy the junction temperature requirements in terms of performance and reliability, improvements in cooling technologies is required. As a result thermal management is becoming important and increasingly critical to the avionics industry. The task of maintaining acceptable junction temperature by dissipating the heat from the integrated circuit chips is a significant challenge to the thermal engineers. Air cooling is the simplest and principal method of thermal control of avionic systems. Low-power electronic systems are conveniently cooled by natural convection and radiation. When natural convection is not adequate, the forced convection is adopted by a fan or blower to blow the air through the enclosure that houses the avionic components. But, most of the avionic systems must be air tight or sealed, to survive harsh environment, shock load, high vibration, acoustics and EMI/EMC problems. Along with the above concerns, the issue of weight adds to the complexities of thermal management.To overcome above problems, a piezoelectric micro blower, which have large air discharge, has to be designed. This micro blower is an ultra-compact piezoelectric device that is thin enough to be installed in the gaps found in densely packed avionics and develops a high enough pressure to generate sufficient flow rate. The project work deals with the design and analysis of a piezoelectric micro blower. CFD is performed for the flow analysis of a blower.

Konduru Venkata Gopinadh, P. Mariya Kumar, K. Velmurugan

Bimorph Piezoactuated, EMI/EMC, CFD, Integrated Circuits, LSI, CFD, PZT, ALE

  1. Qifeng Cui, Chengliang Liu and Xuan F. (William) Zha, "Design and simulation of a piezo electrically actuated micro pump for the drug delivery system", Proceeding of the 2006 IEEE International Conference on Automation Science and Engineering, Shanghai, China, October 7-10, 2006
  2. Manoj Pandey and P.C. Upadhyay., "Design and Simulation of Valve Less PZT Micro pump for Drug Delivery System", International Journal of Advancements in Technology, http://ijict.org/ ISSN 0976-4860, Vol. 3 No.2 (April 2012) © IJoAT
  3. B Fan, G Song and F Hussain, "Simulation of a piezo electrically actuated Valve less micro pump", Institute Of Physics Publishing Smart Materials And Structures, Smart Mater. Struct. 14 (2005) 400–405 doi:10.1088/0964-1726/14/2/014
  4. Chiang-Ho Cheng and Chih-Kai Chen, "Characteristic Studies of the Piezo electrically Actuated Valve less Micro pump", Proceedings of the World Congress on Engineering 2013 Vol III, WCE 2013, July 3 - 5, 2013, London, U.K.
  5. Juan J. Rojas, Jose E. Morales, "Design and Simulation of a Piezoelectric Actuated Valve less Micro pump", Excerpt from the Proceedings of the 2015 COMSOL Conference in Boston
  6. Michal Staworko and Tadeusz UHL, "Modelling and simulation of piezoelectric elements _ comparison of available methods and tools", Mechanics Vol. 27 No:4, 2008
  7. Mukesh Tak and Saurab M. Patel, "Determination of tip’s deflections of a piezoelectric cantilever beam with voltage variation", 978-1-4799-7678- 2/15/$31.0 ©2015 IEEE
  8. David C. Duran AND Omar D. Lopez, "Computation Modelling of synthetic jets", excerpt from the proceedings of the COMSOL conference 2010, Boston.
  9. COMSOL multiphysics manual
  10. W. Wanders, Piezoelectric Ceramics, 1st edition 1991 Eindhoven 4-91
  11. "Piezoelectric Micro blower", by Murata Manufacturing Co. Ltd.

Publication Details

Published in : Volume 2 | Issue 6 | November-December - 2016
Date of Publication Print ISSN Online ISSN
2016-12-05 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
317-330 IJSRSET162695   Technoscience Academy

Cite This Article

Konduru Venkata Gopinadh, P. Mariya Kumar, K. Velmurugan , "Design and Simulation of Bimorph Piezoactuated Micro Blower", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 2, Issue 6, pp.317-330, November-December-2016.
URL : http://ijsrset.com/IJSRSET162695.php


Search Your Article