IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET173135                                                     

Effect of Coefficient of Asymmetry on Strength and Contact Ratio of Asymmetric Helical Gear


Dr. Shivaji V. Gawali, Harshal P. Rahate, Rahul V. Borade
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
A gear is a rotating machine part having cut teeth, which mesh with another toothed part in order to transmit torque. Gears may be spur, helical, bevel or worm in which Helical Gear is most common type of gear used in engineering applications. The increased in performance requirement such as high load carrying capacity, high speed, high reliability and long life leads to new design of gear. So as to fulfill above demand here we used a concept of asymmetric gear profile in which two different pressure angles are assign to two faces of gear tooth. In literature it shows that increased in drive side pressure angle shows improve in strength of spur gear. In this paper we find the effect of coefficient of asymmetry on strength and contact ratio of different helical gear pairs having gear ratio equal to one and transmit same power. All the gear pair are design in Cre-O parametric 2.0 and the analysis is carried out in ANSYS workbench 16.0. Results from numerical analysis shows that as coefficient of asymmetry and helix angle increases Von-Mises stress and total deformation decreases. To validate the results from numerical analysis experiment stress measurement is done using digital strain indicator in which a strain gauge (UFLA-1-350-23) is mounted at the root of the gear and strain is calculate for different loads. In further study we find the effect of coefficient of asymmetry on contact ratio of helical gear pairs, here it shows that decreased in coefficient of asymmetry leads to increased contact ratio.

Dr. Shivaji V. Gawali, Harshal P. Rahate, Rahul V. Borade

Asymmetry, Contact Ratio, FEA, Helix Angle, Pressure Angle

  1. L. Pedersen, "Improving bending stress in spur gears using asymmetric gears and shape optimization", Mechanism and Machine Theory, vol. 45, pp. 1707–1720, 2010.
  2. Praveen Silori, AmirShaikh, Nithin Kumar KC and TusharTandon, "Finite Element Analysis of Traction gear using ANSYS", Materials Today: Proceedings, vol. 2, pp. 2236 – 2245, 2015.
  3. W. Brown, S.R. Davidson, D. B. Hanes and D. J. Weires, " Analysis and Testing of Gears with Asymmetric Involute Tooth Form and Optimized Fillet Form for Potential Application in Helicopter Main Drives", AGMA Technical paper, 10FTM14, 2010.
  4. Shanmugasundaram, M. Kumaresan and N. Muthusamy, "Effects of pressure angle and tip relief on the life of speed increasing gearbox: a case study", Springer Plus, vol. 3, pp. 746, 2014.
  5. Alexander Kapelevich, "Geometry and design of involute spur gears with asymmetric teeth", Mechanism and Machine Theory, vol. 35, pp. 117-130, 2000.
  6. Santosh S. Patil, Saravanan Karuppanan, Ivana Atanasovska and Azmi Abdul Wahab, "Contact stress analysis of helical gear pairs, including frictional coefficients", International Journal of Mechanical Sciences, vol. 85, pp. 205–211, may 2014.
  7. Marimuthu and G. Muthuveerappan, " Design of asymmetric normal contact ratio spur gear drive through direct design to enhance the load carrying capacity", Mechanism and Machine Theory, vol. 96, pp. 22–34, 2016.
  8. YumeiHua, Yimin Shao, Zaigang Chen and Ming J. Zuo, "Transient meshing performance of gears with different modification coefficients and helical angles using explicit dynamic FEA", Mechanical Systems and Signal Processing, vol. 25, pp. 1786–1802, 2011.
  9. Fatih Karpat, Stephen Ekwaro-Osire, Kadir Cavdar and Fatih C. Babalik, "Dynamic analysis of involute spur gears with asymmetric teeth", International Journal of Mechanical Sciences, vol. 50, pp. 1598–1610, oct 2008.
  10. FatihKarpat, Stephen Ekwaro-Osire and EsinKarpat, "A Computer Program for Dynamic Load Simulation of Spur Gears with Asymmetric and Symmetric Teeth", World Journal of Mechanics. Vol. 2, pp. 239-245, Oct 2012.
  11. Cuneyt Fetvaci, Erdem Imrak., "Mathematical Model of a Spur Gear with Asymmetric Involute Teeth and Its Cutting Simulation", Mechanics Based Design of Structures and Machines, vol. 36, pp. 34–46, 2008.

Publication Details

Published in : Volume 3 | Issue 1 | January-February - 2017
Date of Publication Print ISSN Online ISSN
2017-02-28 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
144-150 IJSRSET173135   Technoscience Academy

Cite This Article

Dr. Shivaji V. Gawali, Harshal P. Rahate, Rahul V. Borade, "Effect of Coefficient of Asymmetry on Strength and Contact Ratio of Asymmetric Helical Gear", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 1, pp.144-150, January-February-2017.
URL : http://ijsrset.com/IJSRSET173135.php




National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)