IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET1732204                                                     


Buckling Analysis of Plate Girder with Corrugated Web

Authors(2):

Maya Prakash, Prof. Sabeena M. V.
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
The corrugated steel profiles is widely used in many fields because of its favourable properties and has been applied since the 1920s.It has been increasingly used in web of steel and composite bridges and it increases the shear capacity of web. The corrugated web beams behaves in which the bending moments and applied forces are transversed only via flanges, while the transverse forces are only transferred through the corrugated web. This paper aims to develop three dimensional model using ANSYS 16.1 to study the effect of trapezoidal corrugated shape and compare this with plate girder with stiffeners. This software is employed to find the behaviour and ultimate load capacity of girders. Parametric study was conducted on the trapezoidal corrugated web and this involves the influence of corrugation angle, corrugation thickness and influence of the loading position. Then comparative study was done with plate girder with transverse stiffeners and find out the effect of stiffeners on the plate girder.

Maya Prakash, Prof. Sabeena M. V.

Corrugated webs, Plate girder, Finite element analysis, Ultimate load carrying capacity, ANSYS

  1. Y.A. Khalid, C.L. Chan, B.B. Sahari, A.M.S. Hamouda (2004)Bending behaviour of corrugated web beams, Journal of Materials Processing Technology ,242–254.
  2. Sedkyabdullahtohamy (2013) efficiency of plate girder with corrugated web versus plate girder with flat web ,Minia Journal of Engineering and Technology, (MJET) ,32.
  3. B .Kovesdi,B .Braun,U,Kuhlmann,L.Dunai(2010) patch loading resistance of girder with corrugated webs, Journal of constructional steel research ,66 1445-1454.
  4. Fatimah De’nan, Nor SalwaniHashim (2011)The Effect of Web Corrugation Angle on Bending Performance of Triangular Web Profile Steel Beam Section ,International Journal of Environmental Protection
  5. Sayed Ahmed (2007)Design aspects of steel I-girders with corrugated steel webs ,Electronic journal of structural Engineering
  6. Yi et al. (2008) Interactive shear buckling behaviour of trapezoidally corrugated steel webs, Original Research Article Engineering Structures,30, 6
  7. Limaye A. A, Alandkar P. M (2013)Strength Of Welded Plate Girder With Corrugated Web Plate,Journal of Engineering Research and Applications, 3 5,1925-1930.
  8. Taware J.P, Kulkarni S. K (2015)comparison between buckling analysis of tapered web  and corrugated web ,International journal of engineering sciences and research technology
  9. Hassan and Norbaya Omar (2013)Effect of Triangular Web Profile on the Shear Behaviour of Steel I-Beam ,IJEE an Official Peer Reviewed Journal of BabolNoshirvan University of Technology.
  10. Hartmut Pasternak (2010)plate girders with corrugated webs , journal of civil engineering anad management
  11. Gaya K Vinod (2015) Buckling Analysis of Plate Girders with Corrugated Web ,International Journal of Advanced Research Trends in Engineering and Technology (IJARTET) ,2, 9
  12. Mr.Sujit P. Naikwadi, Mr.S.B.Kandekar,Dr. R.S Talikoti (2015) Numerical Analysis of Buckling Strength of Welded Plate Girder with Corrugated Web Plate Girder , IJSRD - International Journal for Scientific Research & Development, 3, 01,2321-0613
  13. Fatimah De’nan, Nor SalwaniHashim(2007)experimental study on bending behaviour of triangular web profile steel beam section ,IJRET: International Journal of Research in Engineering and Technology ISSN: 2319-1163 | pISSN: 2321-7308
  14. R. Chacón, E. Mirambell, E. Real (2013)Transversally stiffened plate girders subjected to patch loading,Journal of Constructional Steel Research ,80 483–491
  15. Sherif A. Ibrahim (2003) behaviour of plate girders with trapezoidally corrugated webs under monotonic and cyclic loading,Tenth International Colloquium on Structural and Geotechnical Engineering

Publication Details

Published in : Volume 3 | Issue 3 | May-June - 2017
Date of Publication Print ISSN Online ISSN
2017-05-12 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
67-72 IJSRSET1732204   Technoscience Academy

Cite This Article

Maya Prakash, Prof. Sabeena M. V., "Buckling Analysis of Plate Girder with Corrugated Web ", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 3, pp.67-72, May-June-2017.
URL : http://ijsrset.com/IJSRSET1732204.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)