IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET173435                                                     


Structural Modification and Mechanical Properties of Cu-3wt%Si-xwt%Sn Alloy

Authors(3):

K. C. Nnakwo, I. U. Okeke, E. E. Nnuka
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
This study examined the structural modification and mechanical properties of silicon bronze doped with different concentrations of tin. The dopant was added in concentrations of 0.1, 0.3, 0.5, 0.8, 1 and 1.5wt%. The samples were developed using permanent die casting technique and machined to the required dimensions for the structural analysis and mechanical tests. Mechanical properties such as percentage elongation, ultimate tensile strength and Brinell hardness of the developed alloys were investigated using a 100KN JPL tensile strength tester (Model: 130812) and portable dynamic hardness testing machine (Model: DHT-6) respectively. The structural analysis was conducted using an optical metallurgical microscope (Model: L2003A) and scanning electron microscopy (SEM). The surface morphology of the control sample (Cu-3wt%Si) consisted of segregated primary silicon and coarse intermetallic phase (Cu3Si). Addition of tin to the studied alloy significantly refined and modified the segregated primary silicon and coarse intermetallic phases into spherical pattern evenly dispersed in the alloy structure. The percentage elongation, ultimate tensile strength and hardness of the alloy were improved significantly by addition of 0.1wt%Sn. The ultimate tensile strength and hardness of the alloy increased with increase in tin content with corresponding decrease in percentage elongation

K. C. Nnakwo, I. U. Okeke, E. E. Nnuka

Surface Morphology, Tensile Strength, Hardness, Intermetallic Phase

  1. Garcia P., Rivera S., Palacios M. and Belzunce J. (2010) Comparative Study of the Parameters Influencing the Machinability of Leaded Brasses. Engineering Failure Analyses, Vol. 17, pp. 771-776.
  2. Shabestari S.G. and Moemeni H. (2004) Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al-Si-Mg Alloy. Journal of Materials Processing Technology, Vol. 153, pp. 193-198.
  3. William D. N. J. (2010) Metallurgy of Copper Based Alloys, Copper Development Association, Inc., pp. 1-3.
  4. Zhang Werwen, Xia Wei, Wen Li-ping, WU Yuarr biao and Pan Guoru (2003) Mechanical Properties and Tribological Behavior of a Cast Heat Resisting Copper Base Alloy. J.Cent. South Univ. TECHNO. (Journal CSUT). 9(4):235- 239.
  5. Ketut G. S. I, Soekrisno R., Made M. I. and Suyitno (2011) Mechanical and Damping Properties of Silicon Bronze Alloys for Music Applications. International Journal of Engineering & Technology IJET-IJENS, 11 (06): 81-85.
  6. Kulczyk M., Skiba J., Przybysz S., Pachla W., Bazarnik P., Lewandowska M. (2012) High Strength Silicon Bronze (C65500) Obtained by Hydrostatic Extrusion. Arc hives of Metallurgical and Materials, 57 (3): 859-862.
  7. Ohkubo Y., Matsumoto K. and Nagai K. (2005) Acceleration of Cu Surface Precipitation from Bulk by Adsorbed Organic Molecules. Japanese Journal of Applied Physics, 44:3793-3797.
  8. Mattern N., Seyrich R., Wilde L., Baehtz C., Knapp M. and Acker J. (2007) Phase Formation of Rapidly Quenched Cu-Si Alloys. Journal of Alloys and Compounds, vol. 429, pp. 211-215.
  9. Puathawee S., Rojananan S. and Rojananan S. (2013) Lead-Free Cu-Si-Zn Brass with Tin Addition, Advanced Materials Research, Vol. 802, pp. 169-173.
  10. Bozica D., Dimcicb O., Dimcica B., Cvijovica I., Rajkovic V. (2008) The Combination of Precipitation and Dispersion Hardening in Powder Metallurgy Produced Cu-Ti-Si Alloy. Materials Characterization, vol. 5 9, pp. 1122-1126.

Publication Details

Published in : Volume 3 | Issue 5 | July-August - 2017
Date of Publication Print ISSN Online ISSN
2017-08-31 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
184-187 IJSRSET173435   Technoscience Academy

Cite This Article

K. C. Nnakwo, I. U. Okeke, E. E. Nnuka, "Structural Modification and Mechanical Properties of Cu-3wt%Si-xwt%Sn Alloy", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 5, pp.184-187, July-August-2017.
URL : http://ijsrset.com/IJSRSET173435.php