Retrofitting of Reinforced Concrete structural elements - Recent Technologies and Future Scope

Authors

  • Janni Yamini Sudha  Civil Engineering, Aditya Institute of Technology and Management (A), TEKKALI-532201, SRIKAKULAM Dist., Andhra Pradesh, India
  • Ch. Chadra Mouli  Civil Engineering, Aditya Institute of Technology and Management (A), TEKKALI-532201, SRIKAKULAM Dist., Andhra Pradesh, India
  • P Markandeya Raju  Civil Engineering, MVGR College of Engineering (A), VIZIANAGARAM-535005, Andhra Pradesh, India

Keywords:

Retrofitting, Plate Bonding, Flexure, Shear, Section Enhancement, Stitching

Abstract

The retrofitting of concrete structures has become increasingly important in view aging and more deterioration of infrastructure. The problem is more severe due to optimized technologies for construction. Many expansive methods are available for retrofit ting structures and choice of suitable method/material is a challenge to a structural engineer. Retrofitting is the Science and Technology of strengthening the existing structures or structural elements to enhance their performance with new technology, features and components. Retrofitting of an existing reinforced concrete structure includes either repair, rehabilitation (or) strengthening terms. The term retrofit is used if the damaged structure performance was satisfying than before with some additional resistance then the term retrofit will be representative. Now a day’s many researchers have proposed many materials, methods and techniques for strengthening flexure deficient RC beams. The studies performed on the flexure retrofitted RC beams using traditional method like stitching (Hook Method) are studied. Further it is required to study the relative effect of these techniques on flexure carrying capacity of flexure deficient beams by retrofitting.

References

  1. Sankaramouli, Markandeya Raju and Purushottam, (2017), "Experimental Study on Effect of Stitching Depth on Performance of Flexure Retrofitted Beams", March.
  2. Doredla Nagaraju (2017),"Investigation of RC Beams Retrofitted With Ultra High Strength Cementitious Composite Overlay," International Journal of Civil Engineering and Technology (IJCIET), e-ISSN: 0976-6316, p-ISSN: 0976-6308, Volume .8, Issue 3, March, PP.457-467.
  3. T.P.meikandaan,A. Ramachandra Murthy (2017),"Flexural Behaviour of RC Beam Wrapped with GFRP Sheets", International Journal of Civil Engineering and Technology (IJCIET), e-ISSN: 0976-6316, p-ISSN: 0976-6308, Volume .8, Issue 2, February, pp.452-469.
  4. R.Praveenkumar, A.Chiranjeevi A.Kowshikan, M.Dineshmaruthu, Chirag A.patel (2017),"Flexural Behaviour of RC Beam with Hybrid FRP Strengthening", International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) , e-ISSN: 2319-8753, p-ISSN: 2347-6710, Volume .6, Issue 2, March, pp.3821-3826.
  5. Poorna Prasad Rao.O.L, Ramamohan Rao.P (2016),"Retrofitting of Reinforced Concrete Beams Using Rubberizedcoir Fiber Sheets", SSRG International Journal of Civil Engineering (SSRG-IJCE), ISSN: 2348 – 8352, Volume .3, Issue 3, March, pp.20-28.
  6. Mohamed Asick Umar.H , and Manikandan.T (2016),"Flexural Retrofitting of RC Beam Using Hybrid Laminates", International Journal of Science and Research (IJSR), ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2015): 6.391, Paper ID: NOV163143, Volume .5, Issue 6, April, pp.2329-2333.
  7. Abhishek Sharma1, Tara Sen, Joyanta Pal (2016),"Experimental Research on Flexural Characteristics of RC Beams Retrofitted Using FRP and Cement Matrix Composite", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) , e-ISSN: 2278-1684, p-ISSN: 2320–334X, January, pp.94-99.
  8. Ismail M.I Qeshta, Payam Shafigh, and Mohd Zamin Jumaat (2015),"Flexural Behaviour of RC Beam Strengthened with Mesh-Epoxy Composite", construction and building material-ELSEVIER, January, pp.104-114.
  9. Ayyubi, and Sharbatdar (2015),"An Experimental Study on Flexural Retrofitting of the Partial Damaged Reinforced Concrete Beams By Using High Performance Fiber Reinforced Cement Based Composite ( HPIRCC)", International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, IJERTV4IS020671, Volume .4, Issue 2, February, pp.847-851.
  10. A. Chandran, M. Neelamegam (2015),"Flexural Behaviour of Strengthened RC Beams with Muilt-Directional Basalt Fiber-Reinforced Polymer Composite", Archives of civil engineering, Volume .61, Issue 1, DOI:10.1515/ace-2015-0003, March, pp.45-58.
  11. Maheboob.M, Kashinath B R. (2015),"Composite Evolution of Different Retrofitting Techniques", International Journal of Engineering Research (IJER), ISSN:2321-7758, Volume .3, Issue 5, September, pp.145-151.
  12. Ragheed Fatehi Makki (2014),"Response of Reinforced Concrete Beams Retrofitted By Ferrocement", International Journal Of Scientific & Technology Research ( ISSN), Volume .3, Issue 9, ISSN 2277-8616, September, pp.27-34.
  13. Piero Colajanni, Maurizio Papia, Nino Spinella And Antonino Recupero (2014), "Experimental Investigation of RC Beams Retrofitted In Flexure And Shear By Pre-Tensioned Steel Ribbons", second European conference on earthquake engineering and seismography", August, pp.1-11.
  14. J. Sridhar, R. Malathy, and R.K. Sangeetha (2014), "Flexural Strengthening of Reinforced Concrete Beams Using Ferro Cement Laminates with Partial Replacement of Fine Aggregates By Steel Slag", journal of engineering and technology, Volume .4, Issue 2, July-December, pp.123-126.
  15. Balamuralikrishnan R, Antony Jeyasehar C (2013),"Retrofitting of Externally Bonded Thin Cement Composites", Journal of Advanced Applied Sciences (JAAS), Volume .1, Issue 1, November, pp.20-29.
  16. Khair Al-Deen Bsisu ,Yasser Hunaiti , and Raja Younes (2012),"Flexural Ductility Behaviour of Strengthened Reinforced Concrete Beams Using Steel And CFRP Plates", Jordan journal of civil engineering, Volume 6, Issue 3, pp.304-312.
  17. Kothandaraman S, and Vasudevan G (2010),"Flexural Retrofitting of RC Beams Using External Bars at Soffit Level – An Experimental Study", construction and building materials, Volume .24, Issue 1, pp.2208-2216, https://www.highbeam.com/doc/1G1-252846984.html.
  18. G.Appa Rao , Vijayanand , R. Eligehausen (2007)," Studies on Ductility of RC Beams in Flexure and Size Effect", January, pp.671-675.
  19. Wael Almajed, and Robert Xiao, (2006), "Experimental Study of Retrofitted Flexural Reinforced Concrete Beams in Tension and Compression Areas with Fibres", 31st conference on OWICS (our world in concrete & structures), Article Online Id: 100031011, http://cipremier.com/100031011 August.
  20. Hussain, M.; Alfarabi Sharif, I.A. Basunbul, M.H.Baluch, and G.J.Al-sulaimani (1995), "Flexural Behavior of Precracked Reinforced Concrete Beams Strengthened Externally by Steel Plates," ACI Structural Journal, V.92, No.1, Jan.-Feb, pp.14-23.
  21. IS: 456 2000, Code of practice for "Plain and reinforced concrete", Bureau of Indian Standards, New Delhi, (2000).
  22. IS: 10262., Indian Standard recommended guidelines for concrete mix design, Bureau of Indian Standards, New Delhi,( 2009).
  23. ACI 440.1R. (2007). Report on "Fiber-Reinforced Polymer (FRP) Reinforcement", American Concrete Institute (ACI) Committee 440. Farmington Hills, MI.
  24. ACI 440.2R. (2008). Guide for the "Design and Construction of Externally Bonded FRP Systems", American Concrete Institute (ACI) Committee 440. Farmington Hills, MI.
  25. ACI 544.1R. (2002). State-of-the-Art Report on "Fiber Reinforced Concrete", American Concrete Institute (ACI) Committee 544. Farmington Hills, MI.
  26. ACI 544.5R. (2010). Report on the "Physical Properties and Durability of Fiber-Reinforced Concrete", American Concrete Institute (ACI) Committee 544. Farmington Hills, MI.

Downloads

Published

2017-12-31

Issue

Section

Research Articles

How to Cite

[1]
Janni Yamini Sudha, Ch. Chadra Mouli, P Markandeya Raju, " Retrofitting of Reinforced Concrete structural elements - Recent Technologies and Future Scope, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 8, pp.47-60, November-December-2017.