IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET173869                                                     

A Review on Alloy Steel Welded by Plasma Arc Welding and Gas Tungsten Arc Welding for Comparative Study of Mechanical Properties


Harishkumar Parmar, Prof. Riddhish Thakore, Prof. Rajat Dave
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
The austenitic stainless steel 304L are considered as High strength steel and high yield strength materials of interest for technology development, mainly for aeronautics and aerospace industries. For these purpose should increasing the welding speed, increasing the Penetration, decreasing the reject rate and reducing the pre and post welding machining. There are few studies of the process of GTAW and PAW of this material, making it important to study the feasibility of welding these steels. A comparison between the traditional welding processes (TIG-Tungsten Inert Gas and PAW-Welding Plasma Arc) and it was performed defining the influence of different process parameters. This paper mainly focus on the process parameter of the GTAW and PAW process for one to one comparison and evaluation of the process. This review study was performed for selection of the best material for the optimized comparison of two welding process

Harishkumar Parmar, Prof. Riddhish Thakore, Prof. Rajat Dave

GTAW, PAW, SS 304L, Neural Network, Mechanical Properties, Microstructural Characterization

  1. F. Caiazzoa,*, F. Cardaropolia, V. Alfieria, V. Sergia, P. Argenioa, G. Barbierib, Disk-laser welding of Ti-6Al-4V titanium alloy plates in T-joint configuration
  2. S. Brumm*, G. Bürkner, Gas metal arc pulse welding with alternating current for lightweight materials
  3. Sakai, P.R.a, Lima, M.S.F.b, Fanton, L.a, Gomes, C.V.c, Lombardo, S.a, Silva, D.F.a, Abdalla, A.J.b, Comparison of Mechanical and Microstructural Characteristics in Maraging 300 Steel Welded by three different processes: LASER, PLASMA and TIG
  4. F. Souza Netoa, D. Nevesb, O. M. M. Silva b, M. S. F. Limac, A.J. Abdallac, An Analysis of the Mechanical Behavior of AISI 4130 Steel after TIG and Laser welding process.
  5. SUDHAKARAN. Ra*, SIVASAKTHIVEL. P.Sb, NAGARAJA.Sc and EAZHIL. K.Md, The Effect of Welding Process Parameters on Pitting Corrosion and Microstructure of Chromium-Manganese Stainless Steel Gas Tungsten Arc Welded Plates
  6. V.Anand Raoa , Dr.R.Deivanathanb, Experimental Investigation for Welding Aspects of Stainless Steel 310 for the Process of TIG Welding
  7. Kondapalli Siva Prasada*, Chalamalasetti Srinivasa Raob, Damera Nageswara Raoc, Study on Weld Quality Characteristics of Micro Plasma Arc Welded Austenitic Stainless Steels
  8. Rahul Unnikrishnana, K.S.N. Satish Idurya, T.P. Ismaila, Alok Bhadauriaa, S.K. Shekhawatb, Rajesh K. Khatirkara,?, Sanjay G. Sapatea, Effect of heat input on the microstructure, residual stresses and corrosion resistance of 304L austenitic stainless steel weldments
  9. J. Piccinia, H. Svobodaa,b, Effect of the plasma arc welding procedure on mechanical properties of DP700 steel
  10. A. Ure˜na ?, E. Otero, M.V. Utrilla, C.J. M´unez, Weldability of a 2205 duplex stainless steel using plasma arc welding
  11. T. Pasanga,*, J.M.Sánchez Amayab, Y. Taoa, M.R. Amaya-Vazquezb, F.J. Botanab, J.C Sabolc, W.Z. Misiolekc, O. Kamiyad, Comparison of Ti-5Al-5V-5Mo-3Cr Welds Performed by Laser Beam, Electron Beam and Gas Tungsten Arc Welding
  12. Hao Wang, Hongyang Jing, Lei Zhao, Yongdian, Han, Xiaoqing Lv, Lianyong Xu, Dislocation structure evolution in 304L stainless steel and weld joint during cyclic plastic deformation
  13. S.A.A. Akbari Mousavi ?, R. Miresmaeili, Experimental and numerical analyses of residual stress distributions in TIG welding process for 304L stainless steel
  14. Mehdi Rahmani, Abbas Eghlimi, and Morteza Shamanian, Evaluation of Microstructure and Mechanical Properties in Dissimilar austeniticsuper Duplex Stainless Steel Joint
  15. Chun-Ming Lin a,?, Hsien-Lung Tsai a, Chun-Der Cheng a, Cheng Yang b, Effect of repeated weld-repairs on microstructure, texture, impact properties and corrosion properties of AISI 304L stainless steel
  16. Ajay kumara*, Pradeep Kumara, Srishti Mishra a, R K Mishraa Tushar Srivastava, Sachin Mishraa Rajeev Kumarb, Experimental Process of Tungsten Inert Gas Welding of A Stainless steel plate

Publication Details

Published in : Volume 3 | Issue 8 | November-December - 2017
Date of Publication Print ISSN Online ISSN
2017-12-31 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
232-237 IJSRSET173869   Technoscience Academy

Cite This Article

Harishkumar Parmar, Prof. Riddhish Thakore, Prof. Rajat Dave, "A Review on Alloy Steel Welded by Plasma Arc Welding and Gas Tungsten Arc Welding for Comparative Study of Mechanical Properties", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 8, pp.232-237, November-December-2017.
URL : http://ijsrset.com/IJSRSET173869.php