A Review of Literature on 'Experimental Analysis of Overall Heat Transfer Coefficient in Parallel Flow Heat Exchanger by Using Helical Ribs'

Authors(3) :-Shailesh Dewangan, Prof. Parag mishra, Dr. Ajay Singh

A heat exchanger is a device use for efficient heat transfer from one medium to another. Generally the efficiency of heat exchanger is not so good. There have been continuous attempts to increase the heat transfer rate. Different active and passive methods are developed in last few years. Like twisted tapes, wire coils, helical ribs, fins, dimples, etc. The heat transfer between the inner and outer tube of heat exchanger can be improved by either increasing the heat transfer surface area using extended and corrugated surfaces without enhancing heat transfer coefficient or by increasing heat transfer coefficient using the turbulence promoters inside the tube. In this review paper make helical ribs on the tube surface by machining the surface on the lathe So that artificial roughness can be created The artificial roughness that results in an undesirable increase in the pressure drop due to the increased friction; thus the design of the tubes surface of heat exchanger should be executed with the objectives of high heat transfer rates.

Authors and Affiliations

Shailesh Dewangan
M.E Scholar, Mechanical Engineering Department Radharaman Institute of Radharaman Bhopal, Madhya Pradesh, India
Prof. Parag mishra
Assistant Professor, Department of Mechanical Engineering RadharamanInstitute of Technology and Science, Bhopal, Madhya Pradesh, India
Dr. Ajay Singh
Professor and Head, of Mechanical Engineering Institute of technology and Science, Bhopal, Madhya Pradesh, India

Heat Exchanger, Helical Ribs, Heat Transfer Coefficient, Reynolds Number, Nusselt Number.

  1. A. Hosseiniana,b, A.H. Meghdadi Isfahani et al. “Experimental investigation of surface vibration effects on increasing the stability and heat transfer coefficient of MWCNTs-water Nano fluid in a
  2. flexible double pipe heat exchanger", Experimental Thermal and Fluid Science,Vol90,pp275-285,2018.
  3. M.R. Salem , M.K. Althafeeri et. al. "Experimental investigation on the thermal performance of a double pipe heat exchanger with segmental perforated baffles" International Journal of thermal science, Vol.122, pp. 39-52,2017.
  4. Abdalla Gomaa, M.A. Halim et. al. "Enhancement of cooling characteristics and optimization of a triple concentric-tube heat exchanger with inserted ribs" International Journal of thermal science, Vol.120, pp. 106-120,2017.
  5. R.K. Ali, K.M. Elshazly et. al. "Experimental investigation on the hydrothermal performance of a double pipe heat exchanger using helical tape insert" International Journal of Thermal Sciences, Vol.124, pp. 497-507,2018
  6. Sunil Shinde?, Umesh Chavan."Numerical and experimental analysis on shell side thermo-hydraulic performance of shell and tube heat exchanger with continuous helical FRP baffles" Thermal Science and Engineering Progress, Vol.5, pp. 158-171,2018.
  7. Wen-Tao Ji, Anthony M. Jacobi et. al. "Summary and evaluation on the heat transfer enhancement techniques of gas laminar and turbulent pipe flow" International Journal of Heat and Mass Transfer, Vol.111, pp. 467-483,2017.
  8. Juan Du , Yuxiang Hong et. al. "Laminar thermal and fluid flow characteristics in tubes with sinusoidal ribs" International Journal of Heat and Mass Transfer, Vol.120, pp. 635-651,2018.
  9. Hosny Z. Abou-Ziyan et. al. "Enhancement of forced convection in wide cylindrical annular channel using rotating inner pipe with interrupted helical fins" International Journal of Heat and Mass Transfer, Vol.95, pp. 996-1007,2016.
  10. Nianben Zheng, Peng Liu et. al. "Numerical investigations of the thermal-hydraulic performance in a rib-grooved heat exchanger tube based on entropy generation analysis" Applied Thermal Engineering, Vol.99, pp. 1071-1085,2016.
  11. Qing Zhang, Huixiong Li et. al. "Experimental study on heat transfer to the supercritical water upward flow in a vertical tube with internal helical ribs" International Journal of Heat and Mass Transfer, Vol.89, pp. 1044-1053,2015.
  12. Peng Liu, Feng Shan et. al. "Effects of rib arrangements on the flow pattern and heat transfer in an internally ribbed heat exchanger tube" International Journal of Thermal Sciences, Vol.101, pp. 93 105,2016.
  13. Subhankar Saha, Sujoy Kumar Saha. "Heat transfer augmentation in a helical-ribbed tube with double twisted tape inserts" Experimental Thermal and Fluid Science, Vol.50, pp. 107-113,2013.
  14. Zhongyuan Shi, Tao Dong "Thermodynamic investigation and optimization of laminar forced convection in a rotating helical tube heat exchanger" Energy Conversion and Management, Vol.86, pp. 399-405,2014.

Publication Details

Published in : Volume 4 | Issue 1 | January-February 2018
Date of Publication : 2018-02-28
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 406-414
Manuscript Number : IJSRSET184136
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Shailesh Dewangan, Prof. Parag mishra, Dr. Ajay Singh, " A Review of Literature on 'Experimental Analysis of Overall Heat Transfer Coefficient in Parallel Flow Heat Exchanger by Using Helical Ribs', International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 1, pp.406-414, January-February-2018. Citation Detection and Elimination     |     
Journal URL : https://ijsrset.com/IJSRSET184136

Article Preview