A Review on Abrasive Jet Machining

Authors(6) :-Margin Mistry, Swapnil Palkhade, Vinit Patel, Deep Shah, Kishan Vyas, Sharvil Shah

A machining operation is basically material removal process, where material is removed in the form of chips. Abrasive Jet Machining is non-traditional material removal process, and a specialized for shot-blasting operation. It is an effective machining process for a variety of hard and brittle material. Further it illustrates the effect of various input parameter in abrasive jet machining (AJM) on the output parameter Metal removal Rate (MRR). It has various distinct advantages over the other non-traditional cutting technologies such as, high machining versatility, minimum stress on the work piece, high flexibility on thermal distortion and small cutting forces. In addition, extensive review of the current state research challenges and scope development in abrasive jet machining are also projected.

Authors and Affiliations

Margin Mistry
UG Student, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India
Swapnil Palkhade
UG Student, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India
Vinit Patel
UG Student, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India
Deep Shah
UG Student, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India
Kishan Vyas
UG Student, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India
Sharvil Shah
Assistant Professor, Mechanical Engineering, ITM universe, Vadodara, Gujarat, India

Stand-Off Distance, Abrasive Mass Flow Rate, Material Removal Rate, Non-Traditional Machine, Flexibility.

  1. Dr .A. k. Paul &R. K. Roy "some studies on Abrasive jet machining the Journal of the Institution of Engineers (India) Vol. 68 part PE 2 November 1987.
  2. R. Balasubramaniam, J. Krishnan, N. Ramakrishnan, (2001) 'A study on the shape of surface generated by abrasive jet machining’ Journal of materials processing technology, vol. 121, pp.102-106.
  3. El-Domiaty, H.M. Abd El-Hafez, M. A. Shaker, ( 2009) 'Drilling of Glass Sheets by Abrasive Jet Machining’ World Academy of Science, Engineering and Technology, vol. 32 pp. 61-67.
  4. AlirezaMoridi, Jun Wang, Yasser M. Ali, Philip Mathew and Xiaoping Li. „Drilling of Glass Sheets by Abrasive Jet Machining.?? Key Engineering Materials, vol. 443, pp. 645-651, June 2010.
  5. Bhaskar Chandra Kandpa, Naveen Kumar, Rahul Kumar, Rahul Sharma, SagarDeswal(2011) 'machining of glass and ceramic with alumina and silicon carbide in abrasive jet machining’ International Journal of Advanced Engineering Technology (IJAET) vol. 2, pp. 251-256.
  6. Mr. Bhaskar Chandra. , "A Study of effects of Process Parameters of Abrasive jet machining" International Journal of Engineering Science and Technology, vol.3, pp.504-513, Jan. 2011.
  7. Shyam Kumar Karna, Dr. Ran Vijay Singh, Dr. RajeshwarSahai, (2012) 'Application of Taguchi Method in IndianIndustry’ International Journal of Emerging Technology and Advanced Engineering, vol.2, pp. 387-391.
  8. F. AnandRaju, V GnanaPrakash, Dr, M. L. S. Deva Kumar, "Fiber Glass Cutting by using Abrasive Jet Machining and Analysis of process parameters," International Journal of Computer Trends and Technology (IJCTT)-volume 4 Issue 7–July 2013.
  9. R.H.M. Jafar*1, M. Papini2, 1, J.K. Spelt1, 2, "Surface roughness and erosion rate of abrasive jet micro machined channels: Experiments and analytical model",-2013-Elsevier.
  10. JuktiPrasadnPadhy, "Optimization and effect of controlling parameters on AJM using Taguchi technique"Int. Journal of Engineering Research and Applications ISSN: 2248-9622, Vol. 4, Issue 3 (Version 1), pp.598-604, March 2014.
  11. Dr. M. SreenevasaRao, D. V. Shrekanth, Abrasive jet machining-Research Review? International journal of advanced engineering Technology", Vol. 5, pp.18-24, April-June. 2014.
  12. Dr. M. SreenevasaRao, D. V. Shrekanth, "Abrasive jet machining-Research Review", International journal of Advanced engineering Technology, Vol. 5, pp.18-24, April-June. 2014.

Publication Details

Published in : Volume 4 | Issue 1 | January-February 2018
Date of Publication : 2018-02-28
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 561-570
Manuscript Number : IJSRSET184183
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Margin Mistry, Swapnil Palkhade, Vinit Patel, Deep Shah, Kishan Vyas, Sharvil Shah, " A Review on Abrasive Jet Machining, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 1, pp.561-570, January-February.2018
URL : http://ijsrset.com/IJSRSET184183

Follow Us

Contact Us