Parametric Study of Longitudinal Fins

Authors(3) :-Sumit Dashore, Yamini Dewangan, Ashish Kumar Upadhyay

Nowadays the fossil Fuel’s consumption increases day by day, which will create major problem in upcoming years. Since all the vehicles run by fossil fuel only, so to reduce the consumption of fossil fuel, Fins (Extended Surface) plays a vital role. If the temperature of combustion chamber decrease, it will result in increasing the consumption of fuel or if the temperature inside the combustion chamber increases it will melt all the parts, so to transfer the sufficient amount of heat from the combustion chamber to the atmosphere at high rate, we will use the fins. The fins are generally extended surfaces or projections of materials on the system whose function is to transfer heat from the base to the atmosphere. In this we have done the analysis of fins using Finite Difference Method (FDM) and plot the graph. We are using Ansys for designing the fin, Ansys Fluent for Simulation and Microsoft for plotting the graph.

Authors and Affiliations

Sumit Dashore
Department of Mechanical Engineering, Shri Shankaracharya Institute of Professional Management And Technology Mujgahan, Raipur, Chhattisgarh, India
Yamini Dewangan
Department of Mechanical Engineering, Shri Shankaracharya Institute of Professional Management And Technology Mujgahan, Raipur, Chhattisgarh, India
Ashish Kumar Upadhyay
Department of Mechanical Engineering, Shri Shankaracharya Institute of Professional Management And Technology Mujgahan, Raipur, Chhattisgarh, India

Finite Difference Method, Ansys Fluent

  1. M.G. Sobamowo "Analysis of convective longitudinal fin with temperature-dependent thermal conductivity and internal heat generation" , Alexandria Engineering Journal Received 10 December 2015; revised 7 March 2016; accepted 12 April 2016 Available online 22 September 2016
  2. Sidramappa Alur "Experimental Studies on Plate Fin Heat Exchangers"
  3. Saurav kumar, Prof. M.K. Singh "Comparative Analysis of Rectangular and Triangular Fin in Free and Forced Convection", 3rd International Conference on Emerging Trends in Engineering and Management Research 30th July 2017.
  4. Hardik D. Rathod, Ashish J. Modi, Prof. (Dr.) Pravin P. Rathod "Effect of Different Variables on Heat Transfer Rate of Four-Stroke SI Engine Fins- Review Study", International Journal Of Mechanical Engineering And Technology (IJMET) , Volume 4, Issue 2, March - April (2013), pp. 328-333.
  5. Mr. Manir alam, Asst. Prof. "Design and Analysis of fins of varying geometry and material", International journal of computer engineering in research trends.(IJCERT) Volume 3, Issue 2. Feb 2016
  6. M. P Shah,  K. S. Mehra, S.Gautam " Transient and steady state analysis of fins using  for different material" , International journal for research in applied science and engineering technology (IJRASET) Volume 2, Issue 6, June 2014
  7. P. S. Chaitanya, B.Suneela Rani, K. Vijay Kumar "Thermal analysis of engine cylinder fin by varying its geometry and material", IOSR Journal of mechanical engineering. (IOSR) Volume 2, Issue 6, Nov – Dec 2014

Publication Details

Published in : Volume 4 | Issue 7 | March-April 2018
Date of Publication : 2018-03-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 248-254
Manuscript Number : IJSRSET1844297
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Sumit Dashore, Yamini Dewangan, Ashish Kumar Upadhyay, " Parametric Study of Longitudinal Fins, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 7, pp.248-254, March-April-2018.
Journal URL : http://ijsrset.com/IJSRSET1844297

Article Preview

Follow Us

Contact Us