The Study of Effectiveness of Material and Geometry of Different Outrigger Structural System : A Review

Authors

  • Iqra A. Khan  Civil Engineering Department, MGM’s College of Engineering and Technology, Nevi Mumbai, Maharashtra, India
  • N. G. Gore  Assistant professorCivil Engineering Department, MGM’s College of Engineering and Technology, Nevi Mumbai, Maharashtra, India

Keywords:

Outrigger, Belt Truss, Belt Wall, Depth, ETABS, Storey, Concrete

Abstract

The construction of the highrise structure is the need of the hour. Since the increase in population has led the world to the land space crises. Higher the structure, higher will be the challenges against its stability. Lateral forces are the most important factors to be considered when it comes to controlling lateral deflection of the building. And for that several lateral load resisting systems have been implemented in the field since years. Outrigger-belt truss system has been found to be one of the most effective system and hence are used worldwide. This system can be used as per the need and type of building such as only outrigger, outrigger-belt truss, only belt truss, outrigger wall and belt wall, only belt wall etc. Steel outriggers have been studied more by the researchers. This paper presents a review of effectiveness and selection of material and depth of outrigger. From the review, it is concluded that selection of material differs with the type of building, also, increase the depth of the outrigger, stiffer the structure will be.

References

  1. Ali Sherif S. Rizk, “Structural Design Of Reinforced Concrete Tall Buildings”, CTBHU Journal, Issue 1, pp. 43-4, 2010 
  2. Karan D. Sitapara, N.G. Gore, “Review On Feasibility Of High Rise Outrigger Structural System In Seismically Active Regions” International Research Journal of Engineering and Technology, Vol. 03 Issue 07, pp.197-203, 2016
  3. Kwang Ryang Chung, Chulho Park, Do Hyun Kim, “Design Considerations for concrete highrise Buildings”, International Journal of Highrise Buildings Vol. 5 No. 3, 187-193, 2016
  4. John Merrick, Radu Bliuc, Mike Haysler, “Design of a Composite Outrigger Structure for the Dubai Tower, Doha”, Concrete Solutions 09
  5. Jong Soo Kim, “Challenges in Structural Design of W-Project”, International Journal of Highrise Buildings Vol. 3 No. 3, 199-204, 2014
  6. Ranjith Chandunni, Farshad Berahman, “The structural design of Almas Tower, Dubai, UAE”, ICE, 2010
  7. Goman Wai-Ming Ho, “The Evolution of Outrigger Structural system in tall Buildings”, International Journal of Highrise Buildings Vol. 5 No. 1, 21-30, 2016
  8. Da-hai LIU, Mao-zheng WANG, “Masonry Structures Confined with Concrete Beams and Columns”, 12 WCEE, 2000
  9. Errol Dsouza, Dileep Kumar U., “A Study on Outrigger System in Seismic Response of Tall Structures by Non-Linear Analysis”, Vol. 6, Issue 8, 2017
  10. A. Suresh, B. Bhanupriya, A. Ramakrishnaiah, “Influence of Concrete and Steel outrigger and belt truss in high rise Moment Resisting Frames”, International Research Journal of Engineering and Technology, Vol. 04, Issue 11, 2017
  11. Abdul Karim Mullah, Srinivas B. N., “A Study on Outrigger System in a Tall RC Structure with Steel Bracing”, International Journal of Engineering Research and Technology, Vol. 4, Issue 7, 2015
  12. Bhosle Ashwini Tanaji, Shaikh A. N., “Analysis of Reinforced Concrete Building with Different Arrangement of Concrete and Steel Bracing system”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 12, Issue 5, 2015),
  13. Vijaya Kumari Gowda M. R., Manohar B. C., “A Study on Dynamic Analysis of tall Structure with Belt Truss System for Different Siesmic Zones”, International Journal of Engineering Research and Technology, Vol. 4, Issue 8, 2015
  14. Prajyot A. Kakde1, Ravindra Desai, “Comparative Study of Outrigger and Belt Truss Structural System for Steel and Concrete Material”, International Research Journal of Engineering and Technology, Vol. 04, Issue 05, 2017
  15. Raad Abed Al-Jallal Hasan, “Behavior of Beam and Wall Outrigger in High -Rise Building and their Comparison”, International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development, Vol. 6, Issue 1, 2016
  16. Kishan P. Solanki, Pradeep Pandey, “Behaviour of Outrigger System on High Rise Structure by Varying Outrigger Depth”, Journal of Emerging Technologies and Innovative Research, Vol. 4, Issue 04, 2017
  17. Abhishek Arora, Ravi Kumar, “Strengthening of High Rise Building with Outrigger System”, IJSRSET, Vol. 2, Issue 3, 2016
  18. Srinivas Suresh Kogilgeri, Beryl Shanthapriya, “A Study on Behaviour of Outrigger System on High Rise Steel Structure by Varying Outrigger Depth”, International Journal of Research in Engineering and Technology, Vol. 4, Issue 7, 2015
  19. M. R. Suresh, Pradeep K. M., “Influence of Outrigger System in RC Structures for Different Seismic Zones”, International Journal for Scientific Research & Development, Vol. 3, Issue 5, 2015

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2018-05-30

Issue

Volume 4, Issue 2, January-February-2018

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Iqra A. Khan, N. G. Gore, " The Study of Effectiveness of Material and Geometry of Different Outrigger Structural System : A Review, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 2, pp.34-42, January-February-2018.