Design, Development and Fabrication of Automobile Silencer for Exhaust Flow

Authors

  • Namrata Agrawal  Department of Mechanical Engineering, SSJCOE, Asangaon, Maharashtra, India
  • Arun Kulkarni  Department of Mechanical Engineering, SSJCOE, Asangaon, Maharashtra, India

DOI:

https://doi.org//10.32628/IJSRSET196171

Keywords:

Carbon Monoxide, Unburned Hydrocarbon, Oxides of Nitrogen, AQUA SILENCER, Automobile Silencer

Abstract

Air pollution is most important from the public health point of view, because every individual person breathes approximately 22000 times a day, inhaling about 15 to 22 Kg of air daily. Polluted air causes physical ill effect decides undesirable aesthetic and physiological effects. Air pollution can be defined as addition to our atmosphere of any material, which will have a dexterous effect on life upon our planet. The main pollutants contribute by automobiles are carbon monoxide (CO), unburned hydrocarbon (UBHC), oxides of nitrogen (NOx) and Lead. Automobiles are not the only source of air pollution, other sources such as electric power generating stations, industrial and domestic fuel consumption, refuse burning, industrial processing etc. also contribute heavily to contamination of our environment so it is imperative that serious attempts should be made to conserve earth’s environment from degradation. An aqua silencer is an attempt in this direction, it is mainly dealing with control of emission and noise. An aqua silencer is fitted to the exhaust pipe of engine. Sound produced under water is less hearable than it produced in atmosphere. This mainly because of small sprockets in water molecules, which lowers its amplitude thus, lowers the sound level. Because of this property water is used in this silencer and hence its name AQUA SILENCER. The noise and smoke level is considerable less than the conventional silencer, it is cheaper, no need of catalytic converter and easy to install.

References

  1. Kannan, K., &Udayakumar, M. (2009). NOx and HC emission control using water emulsified diesel in single cylinder diesel engine. ARPN Journal of Engineering and Applied Sciences, 4(8), 59-62.
  2. Rawale Sudarshan, S., PatilSnehal, S., Nandrekar Amruta, A., & Abhijeet, S. K. (2013). Use of Aqueous Ammonia in Silencer for removal of CO2, SO2 and NOx from exhaust gases of IC Engines. International Journal of Engineering Science and Innovative Technology, 2(5).
  3. Swastik R, Gajjar, (June 2014) “Design and Development of Aqua Silencer for Two Stroke Petrol Engine”, International Journal for Innovative Research in Science and Technology, Vol.1, Issue 1.
  4. Balashanmugam, P., & Balasubramanian, G. (2015). Developments of Emission and Noise Control Device (Aqua Silencer). International Journal of Modern Trends in Engineering and Research, 2(1).
  5. Patel, K. I., Gajjar, M. S. R., Patel, K. I., &Gajjar, S. (2014). Design and development of aqua silencer for two stroke petrol engine. IJIRST–International Journal for Innovative Research in Science & Technology, 1(1), 31-37.
  6. Alen M.A., Akshay M. et al, “Fabrication and Testing of Aqua Silencer”, International Research Journal of Engineering and Technology (IRJET), Volume 02 Issue 05, August 2015.
  7. Balkrishna S. Patel, Ankit Patel, Sajan Patel. Bhavik Patel ,Akshit Patel(2015). Developement and Experimental Test for Aqua Silencer for air Pollution Control for Diesel Engine. Volume : 4 | Issue : 6 | June2015 ISSN - 2250-1991.
  8. Soundhar, J., Rastrapathi, R., Sugavanam, S., & Venkatesan, M. (2015). New Trends of Emission Control System Used In Silencer. International Journal on Applications in Mechanical and Production Engineering, 1(8), 1-2.
  9. G Maruthi Prasad Yadav, K.Nagaraju, H.Raghavendra, B. MalliKarjuna Reddy, G.Narayana Reddy, J.Bharat Kumar, K.Srikanth, K.Jagadesh “Modeling and Experimental Investigations of the Sound and Emissions performance for 4-stroke multi Cylinder diesel Engine with an Aqua Silencer” International Journal for Research in Applied Science & Engineering Technology (IJRASET) www.ijraset.com Volume 3 Issue V, May 2015 IC Value: 13.98 ISSN: 2321-9653.
  10. Rohit R. Thakare and Ajit J. Khushwah. (2015) “Design and Fabrication of Aqua Silencer for Automobiles”, International Journal of Mechanical and Production Engineering Research and Development, Vol. 5, Issue 6, ISSN: 2249-6890.
  11. Parikshit K. Patel, Keval I. Patel, Ravi Engineer “Cfd Analysis of Perforated Tube of Aqua Silencer” Indian journal of research, paripex Volume : 4 | Issue : 5 | May 2015 ISSN - 2250-1991.
  12. AQUA SILENCER by Nitin.V.Patil ISSN:-23941537 Vol no 5. Issue no 3 march 2016.
  13. Akhil ChowdaryBellam, MekaRaghunadh, Akhil Chirra And S. Ravi Krishnamoorthy “FABRICATION AND TESTING OF AQUA SILENCER”. Int. J. Chem. Sci.: 14(S2), 2016, 687-693, ISSN 0972-768X.
  14. Krishna, R. Design and Development of Aqua Silencer.
  15. Prof H.AKhande, KaransinghK.Naglot, Shubham B.Lutade, AkshayK.Pardeshi, RuthujaS.Patil (May-2016), “Reduction in Emission and Noise Using AQUA SILENCER”, International Journal of Scientific Development and Research, Vol. 1, Issue 5
  16. Harshal S. Khairnar, Kaushal S. Kangane “Fabrication & Analysis of An Aqua Silencer” 4th International Conference On Recent Innovation In Science Engineering And Management, India International Center, New Delhi (ICRISEM-16) 20TH March 2016 ISBN: 978-81-932074-6-8.
  17. Rishikesh Acharekar, DigvijayBhujbal, Omkar bhingole, Nitin Sherkar, Prof. Rohit Argade.A Review on Design of Aqua-Silencer.IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 01, 2016 | ISSN (online): 2321-0613.
  18. Prof.AnupM.Gawande , Mr.Pavank.ingle ,“ Aqua Silencer”, International Research Journal of Engineering and Technology (IRJET) eISSN: 2395 -0056 Volume: 03 Issue: 10 | Oct -2016.
  19. HarshitSaraswat (2017)“Aqua silencer” Research Journal of Recent Sciences Vol. 6(10), 20-22, October._ISSN 2277-2502 Res. J. Recent Sci.
  20. M Naveen kumar, S Prabu, A Raj Kumar, P Boobala Krishnan (2017). EXPERIMENTAL INVESTIGATION OF AQUA SILENCER. SSRG International Journal of Mechanical Engineering – (ICET’17) – Special Issue – March 2017.
  21. Shubham Ghule, Kiran Supekar, M. M. Kulkarni (2017).Statistical Analysis and Testing of Aqua Silencer through Experimental Set up of Diesel Engine. International Engineering Research Journal (IERJ), Volume 2 Issue 9 Page 3212-3217, 2017 ISSN 2395-1621
  22. Kumar, S. S. S., Brinton, S. R., Kumar, G. S., Saravanamanoj, S., &Babu, M. Design and Fabrication of Eco-Friendly Aqua Silencer.
  23. Sharavanan, R., &Sabarish, R. (2017). Design and Fabrication f Aqua Silencer Using Charcoal and Lime Stone. International Journal of Pure and Applied Mathematics, 116(14).
  24. Dr. P.K.Sharma ,Swapnil V. Kasar “Design And Manufacturing of Auqa Silencer for Two Stroke Petrol engine.
  25. Shaikh L.T.,RautA.V.,Sake S.H.,Pote S.S., Velapure S.P.(2017). Design Manufacturing & Testing of Aqua Silencer as an Emission Control.International Engineering Research Journal (IERJ), Volume 2 Issue 8 Page 2929-2931, 2017 ISSN 2395-1621

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2019-01-30

Issue

Volume 6, Issue 1, January-February-2019

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Namrata Agrawal, Arun Kulkarni, " Design, Development and Fabrication of Automobile Silencer for Exhaust Flow, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 1, pp.367-379, January-February-2019. Available at doi : https://doi.org/10.32628/IJSRSET196171