Design and Fabrication of Two-Wheeler Silencer Using Catalytic Convertor

Authors(3) :-M. Ganesh, A. Sriramarvind, P. K. Saran Kumar

Air pollution is the biggest cause of environmental degradation in the world and it also cause health problems. The major source for these pollutions are industries & automobiles. In automobile pollutants can be reduced by using a catalytic converter the main aim of our project is fabricate the low cost catalytic converter for two wheeler. The emission contents namely NOx and HC are 90% reduced. From the public health point of view the is most important is Air pollution , because every individual person breathes approximately 22000 times a day, inhaling about 15 to 22 Kg of air daily. Polluted air causes physical ill effects and undesirable aesthetic and physiological effects. The main pollutants are contributed by automobiles which include carbon monoxide (CO), unburned hydrocarbon (UBHC), oxides of nitrogen (NOx) and Lead. So it is imperative that serious attempts should be made to conserve earth’s environment from degradation

Authors and Affiliations

M. Ganesh
Department of Mechanical Engineering, IFET College of Engineering, Villupuram, Tamil Nadu, India
A. Sriramarvind
Department of Mechanical Engineering, IFET College of Engineering, Villupuram, Tamil Nadu, India
P. K. Saran Kumar
Department of Mechanical Engineering, IFET College of Engineering, Villupuram, Tamil Nadu, India

Four Stroke Engine ,Oxides Of Nitrogen, Carbon Monoxide, Hydro Carbon, Silencer, Filter

  1. V. Veeraragavan, “Fabrication and Testing of a Catalytic Convertor”, International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 2, Issue 11, November 2013 ISSN 2319 – 4847.
  2. J SojiAdeyinka, J U Okoli, YousuoDigineni, “Design and Fabrication of a catalytic reactor for treating automobile exhaust”, Indian Journal of Chemical Technology, Vol. 11, July 2004, pp. 560-564.
  3. Rajesh B Biniwale, Moqtik A Bawase, M MDeshmukh, “Production of Automotive Catalytic Converter based on Non-noble Metal Catalyst technology: A feasible Option”, Journal of Scientific & Industrial Research, Vol. 60, September 2001, pp 728-734.
  4. Narendrasinh R. Makwana, Prof. Chirag M. Amin, Prof. Shyam K. Dabhi, “Development and Performance Analysis of Nickel Based Catalytic Converter”, International Journal of Advanced Engineering Technology E-ISSN 0976-3945.
  5. Prof. Bharat S Patel, MrKuldeep D Patel, “A Review paper on Catalytic Converter for Automotive Exhaust Emission”, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol.7 No.11 (2012).
  6. R Kumar,M Z Hasan , “A Non noble metal based catalytic converter for two-stroke, two wheeler applications.” Journal of Scienific& Industrial Research Vol.69,September 2005.
  7. Pascal Kiwitz, Christopher Onder, LinoGuzzella , “ Control- otiented modeling of a three-way catalytic converter with observation of the relative oxygen level profile”.Journal of Process ControlVolume 22, Issue 6, July 2012, Pages 984–994.
  8. Akira luiz jose Ricardo, “Evalution of catalytic converter aging for vehicle operation with ethanol”, .” Journal of Scienific& Industrial Research Vol.36,oct. 2004.
  9. M VS Murali, “ Comparative studies on performance evalution of a two stroke copper coted spark ignition engine with alcohols with catalytic converter. DOI: 10.1016/j.ces.2012.01.061.
  10. R.E. Hayes, “Hierarchical multi-scale model reduction in the simulation of catalytic converters” DOI: 10.1016/j.ces.2013.01.059.

Publication Details

Published in : Volume 6 | Issue 2 | March-April 2019
Date of Publication : 2019-04-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 223-228
Manuscript Number : IJSRSET196247
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

M. Ganesh, A. Sriramarvind, P. K. Saran Kumar, " Design and Fabrication of Two-Wheeler Silencer Using Catalytic Convertor , International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 2, pp.223-228, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRSET196247
Journal URL : http://ijsrset.com/IJSRSET196247

Article Preview