Utilization of Fly-Ash and Pond-Ash as A Partial Replacement of Cement In Concrete Mix Design

Authors

  • Harshkumar Patel  P.G. Scholar, Department of Civil Engineering, SPCE, Visnagar, Gujarat, India
  • Dr. Yogesh Patel  Head of Department, Department of Civil Engineering, SPCE, Visnagar, Gujarat, India

DOI:

https://doi.org//10.32628/IJSRSET196271

Keywords:

Fly Ash, Pond Ash, Concrete, Compression, Flexural, Split tensile strength, Durability.

Abstract

Now-a-days energy planners are aiming to increase the use of renewable energy sources and nuclear to meet the electricity generation. But till now coal-based power plants are the major source of electricity generation. Disadvantages of coal-based thermal power plants is disposal problem of fly ash and pond ash. It was earlier considered as a total waste and environmental hazard thus its use was limited, but now its useful properties have been known as raw material for various application in construction field. In this present study of concrete produced using fly ash, pond ash and OPC 53 grade will be carried. An attempt will be made to investigate characteristics of OPC concrete with combined fly ash and pond ash mixed concrete for Compressive Strength test, Split Tensile Strength test, Flexural Strength test and Durability tests.

References

  1. Amit Mittal, M.B. Kaisare, Rajendrakumar Shetti “Experimental Study On Use Of Fly Ash In Concrete”, Tarapur Atomic Power Project 3 & 4, Nuclear Power Corporation Of India Limited.
  2. “Fly Ash For Cement Concrete”, Ash Utilization Division, National Thermal Power Corporation Ltd.
  3. Bharathi Ganesh, H. Sharada Bai, R. Nagendra and B.K. Narendra “Characterization Of Pond Ash As Fine Aggregate In Concrete”, Proceedings Of International Conference On Advances In Architecture And Civil Engineering (Aarcv 2012), 21st – 23rd June 2012, Paper Id Sam189,Vol. 1.
  4. Semsi Yazici, Hasan Sahan Arel “Effects Of Fly Ash Fineness On The Mechanical Properties Of Concrete”, Sardhana Vol. 37, Part 3, June 2012, Pp. 389 – 403 Indian Academy Of Sciences.
  5. Arumugam K, Ilangovan R, James Manohar D “A Study On Characterization And Use Of Pond Ash As Fine Aggregate In Concrete”, International Journal Of Civil And Structural Engineering Volume 2, No 2, 2011.
  6. Michael Thomas “Optimizing The Use Of Fly Ash In Concrete”, Portland Cement Association Year – 2007.
  7. Gaurav Kantilal Patel, Prof. Jayeshkumar Pitroda “Assessment Of Natural Sand And Pond Ash In Indian Context”, International Journal Of Engineering Trends And Technology (Ijett), Oct 2013.
  8. Prof. P.P. Bhangale, Prof. P.M. Nemade “Study Of Pond Ash (BTPS) Use as A Fine Aggregate in Cement Concrete”, International Journal Of Latest Trends in Engineering and Technology (IJLTET).
  9. S.P. Dave, P.H. Shah “Studies On Seepage Characteristic Of Fly Ash From Ahmedabad”, IGC 2009, Guntur, INDIA.
  10.  M.N. Balakrishna, M.C. Nataraja “Proportioning Of Fly Ash Concrete Mixes A Comprehensive Approach”, International Journal Of Emerging Science and Engineering (IJESE) ISSN: 2319 – 6378, Volume-1, Issue-8, June 2013.
  11.  Bang, Y.M. Ghugal, I.K. Pateriya “Strength Performance of Pond Ash Concrete”, International Journal of Earth Sciences and Engineering, ISSN 0974-5904, Volume 05, No. 01.
  12. IS: 383 – 1970, “Specification for Coarse and Fine Aggregate from Natural Sources for Concrete”, Bureau of Indian Standards, New Delhi.
  13. IS:516 – 1959, “Method of Test for Strength of Concrete”, Bureau of Indian Standards, New Delhi.
  14. IS:2386 – 1963, “Methods of Test for Aggregate for Concrete”, Bureau of Indian Standards, New Delhi.
  15. IS:12269 – 2013, “Ordinary Portland Cement 53 Grade Specification”, Bureau of Indian Standards, New Delhi.
  16. IS:456 – 2000, “Plain and Reinforced Concrete – Code of Practice”, Bureau of Indian Standards, New Delhi.

Downloads

Published

2019-04-30

Issue

Section

Research Articles

How to Cite

[1]
Harshkumar Patel, Dr. Yogesh Patel, " Utilization of Fly-Ash and Pond-Ash as A Partial Replacement of Cement In Concrete Mix Design, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 2, pp.211-216, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRSET196271