Analysis of Dissimilar Metal Welding of 1020 Mild Steel and 304 Stainless Steel

Authors

  • Dandu Rohith Raja  M.Tech Student, CAD/CAM, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India
  • S. Jithendra Naik  Associate Professor, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India
  • L. Balasubramanyam  HOD & Associate Professor, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India

DOI:

https://doi.org//10.32628/IJSRSET196442

Keywords:

Dissimilar Welding, Stress Corrosion Cracking, Thermal Stress, Residual Stress.

Abstract

Joining of dissimilar metals has found its use extensively in power generation, electronic, nuclear reactors, petrochemical and chemical industries mainly to get tailor-made properties in a component and reduction in weight. However efficient welding of dissimilar metals has posed a major challenge due to difference in thermo-mechanical and chemical properties of the materials to be joined under a common welding condition. This causes a steep gradient of the thermo-mechanical properties along the weld.

References

  1. Chengwu Yao, Binshi Xu, Xiancheng Zhang, Jian, Huang, Jun Fu and Yixiong Wu “Interface microstructure and mechanical properties of laser welding copper-steel dissimilar joint” Optics and Lasers in Engineering, Vol. 47, 2009, PP 807-814.
  2. Wen-chun Jiang and Xue-wei Guan “A study of the residual stress and deformation in the welding between half-pipe jacket and shell” Materials and Design, Vol. 43, 2013, PP 213-219.
  3. Man Gyun Na, Jin Weon Kim and Dong Hyuk Lim “Prediction of Residual
  4. Stress for dissimilar metals welding at nuclear plants using Fuzzy Neural
  5. Network Models” Nuclear Engineering and Technology, Vol. 39, 2007, PP 337-348.
  6. M.M.A. Khan, L. Romoli, M. Fiaschi, G. Dini and F. Sarri “Laser beam welding of dissimilar stainless steels in a fillet joint configuration” Journal of Materials Processing Technology, Vol. 212, 2012, PP 856-867.
  7. Yoshiyasu Itoh and Kabushiki Kaisha Toshiba “Joined structure of dissimilar metallic materials” Patent Publication Number, EP0923145A2, 1999.
  8. P. Delphin, I. Sattari-Far and B. Brickstad “Effect of thermal and weld induced residual stresses on the j-integral and ctod in elastic-plastic fracture analyses” Final Report Vol. SINTAP/SAQ/03, 1998, PP 1-47.
  9. T.A. Mai and A.C. Spowage “Characterization of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium” Materials Science and Engineering, Vol. 374, 2004, PP 224-233.
  10. Paul Colegrove, Chukwugozie Ikeagu, Adam Thistlethwaite, Stewart Williams,
  11. Tamas Nagy, Wojciech Suder, Axel Steuwer and Thilo Pirling “ The welding process impact on residual stress and distortion” Science and Technology of Welding and Joining, Vol. 14, 2009, PP 717-725.
  12. Mekala P., Kunuthur M.R., Chandramohana Reddy B. (2019) Evaluation of the Mechanical Properties of Recycled Jute Fiber-Reinforced Polymer Matrix Composites. In: Vasudevan H., Kottur V., Raina A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore DOI https://doi.org/10.1007/978-981-13-2490-1_26
  13. AI-Fahed, S. and Chakroun, W. (1996), Effect of tube tape clearance on heat transfer for fully developed turbulent flow in a horizontal isothermal tube. Int. J. Heat and Fluid Flow, Vol.17, pp. 173-178.
  14. Rao, M. M. and Sastri, V. M. K. (1995), Experimental investigation for fluid flow and heat transfer in a rotating tube twisted tape inserts. Int. J. Heat and Mass Transfer, Vol. 16, pp. 19-28.
  15. Kunuthur M.R., Reddy B.C. (2019) Investigation of Moisture Absorption in Jute Fiber Polymer Matrix Composites. In: Vasudevan H., Kottur V., Raina A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore DOIhttps://doi.org/10.1007/978-981-13-2490-1_34
  16. Sivanshanmugam, P. and Sunduram, S. (1999), Improvement in performance of heat exchanger fitted with twisted tape. J. Energy Engg, Vol.125, pp. 35-40.
  17. Agarwal, S. K. and Raja Rao, M. (1996), Heat transfer augmentation for flow of viscous liquid in circular tubes using twisted tape inserts. Int. J. Heat Mass Transfer, Vol. 99, pp.3547

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2019-08-30

Issue

Volume 6, Issue 4, July-August-2019

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Dandu Rohith Raja, S. Jithendra Naik, L. Balasubramanyam, " Analysis of Dissimilar Metal Welding of 1020 Mild Steel and 304 Stainless Steel , International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 4, pp.312-315, July-August-2019. Available at doi : https://doi.org/10.32628/IJSRSET196442