Critical review on different burnishing processes of Ti-6Al-4V Alloy

Authors(3) :-Madhukar Samatham, Ashok Kumar U, Laxminarayana Pappula

Titanium and its alloys are the most commonly and most widely used due to its significant properties like good biocompatibility , good tensile strength , low density , and good creep property up to 300 degrees centigrade .It is used in the major engineering fields like civil engineering , nuclear engineering , aerospace engineering etc. Surface finish of the titanium material plays a prominent role in influencing its functional characteristics like wear resistance, fatigue strength, corrosion resistance and power loss due to friction. In normal machining methods like turning, milling or even classical grinding can’t meet the desired surface finish. To overcome this one of the method employed is burnishing, which is very simple and effective method for improvement in surface finish and can be carried out on lathe machine. The latest innovate technique used in the burnishing is the cryogenic burnishing in which the liquid nitrogen is supplied as the coolant. This work deals with study of different burnishing processes of titanium alloy Ti-6Al-4V.

Authors and Affiliations

Madhukar Samatham
PG Scholar, Mechanical Engineering Department, University College of Engineering, Osmania University, Hyderabad, India
Ashok Kumar U
Assistant Professor, Mechanical Engineering Department, University College of Engineering, Osmania University, Hyderabad, India
Laxminarayana Pappula
Professor, Mechanical Engineering Department, University College of Engineering, Osmania University, Hyderabad, India

Titanium, Burnishing, Titanium Alloys , Cryogenic Burnishing

  1. D.O. Sullivan, M. Cotterell, Temperature measurement in single point turning, J.Mater. Process. Technol. 118 (2001) 301–308.
  2. G. Rotella, O.W. Dillon, D. Umbrello, L. Settineri, I.S. Jawahir, The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy, Int. J. Adv. Manuf.Technol. 71 (2013) 47–55,http://dx.doi.org/10.1007/s00170-013-5477-9.
  3. Samatham Madhukar, Dasari Jagath Prakash, Birudala Raga Harshith Reddy, Dr.V.V.Satyanarayana , An Experimental Investigation on Machinability of Titanium (Grade -2) using Cryogenic Machining , International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 4, April 2017,pp.647-653. ISSN (Online) 2456-1290
  4. Y. Sun, B. Huang, D.A. Puleo, J. Schoop, I.S. Jawahir, Improved surface integrity from cryogenic machining of Ti-6Al-7Nb alloy for biomedical applications, Procedia CIRP 45 (2016) 63–66, http://dx.doi.org/10.1016/j.procir.2016.02.362.
  5. J. Tang, H.Y. Luo, Y.B. Zhang, Enhancing the surface integrity and corrosion resistance of Ti-6Al-4V titanium alloy through cryogenic burnishing, Int. J. Adv.Manuf. Technol. (2017) 2785–2793, http://dx.doi.org/10.1007/s00170-016- 9000-y.
  6. S. Madhukar, A. Shravan, P. Vidyanand Sai and Dr. V.V. Satyanarayana, A Critical Review on Cryogenic Machining of Titanium Alloy (Ti-6Al-4V). International Journal of Mechanical Engineering and Technology, 7(5), 2016, pp. 38–45. http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=7&IType=5
  7. S. Bruschi, R. Bertolini, A. Bordin, F. Medea, A. Ghiotti, Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications, Tribol. Int. 102 (2016) 133–142,http://dx.doi.org/10.1016/j.triboint.2016.05.036.
  8. N.H. Loh, S.C. Tam, A study of the effects of ball burnishing parameters on surface roughness using factorial design, Prec. Eng. 18 (1989) 53–61.
  9. Samatham Madhukar, Aitha Shravan ,Katarapu Ram Kumar and J. Jagadesh Kumar , An Experimental Investigation on Machinability of Titanium and Steels using Cryogenic Machining , International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 5, May 2017, pp.830-837. ISSN (Online) 2456-1290
  10. W. Grzesik, ?Functional Properties of Hardened Steel Parts Genereted By Turning and Ball Burnishing Operations,? Adv. Manuf. Sci. Technol., vol. 36, no. 4, pp. 5–17, 2012.4
  11. B. Tadic, S. Randjelovic, P. Todorovic, J. Zivkovic, V. Kocovic, I. Budak, and D. Vukelic, ?Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings,? Precis. Eng., vol. 43, pp. 335– 344, 2016.
  12. Paaka Vidyanand Sai, Samatham Madhukar, Malis Krishna Prasad Reddy, N V S Ramachandra Rao, " A Review on Machinability Aspects of Titanium Grade-2", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3 Issue 2, pp.270-275, March-April 2017. URL : http://ijsrset.com/IJSRSET173287.php
  13. D. Grocha?a, S. Berczy?ski, and Z. Grz?dziel, ?Stress in the surface layer of objects burnished after milling,? Int. J. Adv. Manuf. Technol., vol. 72, no. 9–12, pp. 1655–1663, 2014.
  14. P. Zhang and Z. Liu, ?Effect of sequential turning and burnishing on the surface integrity of Cr-Ni-based stainless steel formed by laser cladding process,? Surf. Coatings Technol., vol. 276, pp. 327–335, 2015.
  15. F. Gharbi, S. Sghaier, H. Hamdi, and T. Benameur, ?Ductility improvement of aluminum 1050A rolled sheet by a newly designed ball burnishing tool device,? Int. J. Adv. Manuf. Technol., vol. 60, no. 1–4, pp. 87–99, 2012.
  16. a. Rodríguez, L. N. López de Lacalle, a. Celaya, a. Lamikiz, and J. Albizuri, ?Surface improvement of shafts by the deep ball-burnishing technique,? Surf. Coatings Technol., vol. 206, no. 11–12, pp. 2817–2824, 2012.
  17. Aitha Shravan, Samatham Madhukar, Bootla Akhil, Dr. A. A. Sri Rama Krishna , " Experimental and Numerical Analysis of Metal Removal Rate and Surface Finish on Al-Ti Alloy", International Journal of Scientific Research in Science, Engineering andTechnology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3 Issue 1, pp.407-411, January-February 2017. URL : http://ijsrset.com/IJSRSET1731104.php
  18. W. Grzesik and K. Zak, ?Modification of surface finish produced by hard turning using super finishing and burnishing operations,? J. Mater. Process. Technol., vol. 212, no. 1, pp. 315–322, 2012.
  19. T. Zhang, N. Bugtai, and I. D. Marinescu, ?Burnishing of aerospace alloy: A theoretical-experimental approach,?J. Manuf. Syst., pp. 2–8, 2014.
  20. C. S. Jawalkar and R. S. Walia ?Study Of Roller Burnishing Process On En-8 Specimens Using Design of Experiments?, Journal of Mechanical Engineering Research Vol.1(1) PP-038-045, Nov. 2009
  21. Miyamoto H, Harada K, Mimaki T, Vinogradov A, Hashimoto (2008) Corrosion of ultra-fine grained copper fabricated by equalchannelangular pressing. Corros Sci 50(5):1215–1220. doi:10.1016/j.corsci.2008.01.024
  22. Jiang Z, Dai X, Middleton H (2011) Investigation on passivity oftitanium under steady-state conditions in acidic solutions. MaterChem Phys 126(3):859–865. doi:10.1016/j.matchemphys.2010.12.028
  23. Pacha-Olivenza MA, Gallardo-Moreno AM, Vadillo-Rodríguez V,González-Martín ML, Pérez-Giraldo C, Galván JC (2013)Electrochemical analysis of the UV treated bactericidal Ti6Al4Vsurfaces. Mater Sci Eng C 33(3):1789–1794. doi:10.1016/j.msec.2012.12.079
  24. Guo HX, Lu BT, Luo JL (2006) Study on passivation and erosionenhancedcorrosion resistance by Mott-Schottky analysis. Electrochim Acta 52(3):1108–1116. doi:10.1016/j.electacta.2006.07.026
  25. Cheng YFLJL (1999) Electronic structure and pitting susceptibilityof passive film on carbon \ steel. Electrochim Acta 44(17):2947–2957
  26. Zheng ZJ, Gao Y, Gui Y, Zhu M (2012) Corrosion behaviour ofnanocrystalline 304 stainless steel prepared by equal channel angularpressing. Corros Sci 54:60–67. doi:10.1016/j.corsci.2011.08.049
  27. Ralston KD, Birbilis N, Davies CHJ (2010) Revealing the relationshipbetween grain size and corrosion rate of metals. Scr Mater63(12):1201–1204. doi:10.1016/j.scriptamat.2010.08.035
  28. Lu H, Li Y, Wang F (2006) Enhancement of the electrochemicalbehavior for Cu–70Zr alloy by grain refinement. Surf Coat Technol201(6):3393–3398. doi:10.1016/j.surfcoat.2006.07.208
  29. Youssef KMS, Koch CC, Fedkiw PS (2004) Improved corrosionbehavior of nanocrystalline zinc produced by pulse-current electrodeposition.Corros Sci 46(1):51–64. doi:10.1016/S0010-938X(03)00142-2
  30. Balyanov A (2004) Corrosion resistance of ultra fine-grained Ti.Scr Mater 51(3):225–229. doi:10.1016/j.scriptamat.2004.04.011
  31. Li J, Li SJ, Hao YL, Yang R (2014) Electrochemical characterizationof nanostructured Ti–24Nb–4Zr–8Sn alloy in 3.5% NaCl solution.Int J Hydrog Energ 39(30):17452–17459. doi:10.1016/j.ijhydene.2014.01.144
  32. Kim HS, BushMB (1999) The effects of grain size and porosity onthe elastic modulus of nanocrystalline materials. Nanostruct Mater11(3):361–367. doi:10.1016/S0965-9773(99)00052-5
  33. YangY-C,ChangE.Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti–6Al–4V substrate. Biomaterials 2001;22:1827–36.
  34. MavisB,Ta? AC. Dip coating of calcium hydroxyapatite on Ti–6Al–4V substrates. JournaloftheAmericanCeramicSociety2000;83:989–91.
  35. KochC,Johnson S,KumarD ,JelinekM, ChriseyD ,DoraiswamyA ,et al. Pulsed laser deposition of hydroxyapatite thin films. Materials Science and Engineering: C2007;27:484–94.
  36. Man H,ChiuK ,ChengF ,WongK .Adhesion study of pulsed laser deposited hydroxyapatite coating on laser surface nitride titanium.Thin Solid Films 2009;517:5496–501.
  37.  Shu Yanga,, Domenico Umbrellob, Oscar W. Dillon Jr. a, David A. Puleoc, I.S. Jawahira , Cryogenic cooling effect on surface and subsurface microstructural modifications in burnishing of Co–Cr–Mo biomaterial, Journal of Materials Processing Technology 217 (2015) 211–221

Publication Details

Published in : Volume 7 | Issue 1 | January-February 2020
Date of Publication : 2020-02-29
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 266-273
Manuscript Number : IJSRSET20721
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Madhukar Samatham, Ashok Kumar U, Laxminarayana Pappula, " Critical review on different burnishing processes of Ti-6Al-4V Alloy, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 1, pp.266-273, January-February-2020. Available at doi : https://doi.org/10.32628/IJSRSET20721      Citation Detection and Elimination     |     
Journal URL : https://ijsrset.com/IJSRSET20721

Article Preview