Design and Fabrication of 5 Ton Hydraulic Press Machine

Authors(8) :-Mohammed Iqbal Khatib, Roshan Zameer Ahmed , Md Saud Uddin, Mohammad Abdul Rahman, Mohd Rahman Shareef, Syed Akber, Majid Khan, Shahin Shaikh

A hydraulic press is a machine using a hydraulic cylinder to generate a compressive force. Frame, hydraulic cylinder and press table are the main components of the hydraulic press. In this project press frame, cylinder and press table are designed by the design procedure. They are analyzed to improve their performance and quality for press working operation. Using the optimum resources possible in designing the hydraulic press components can effect reduction in the cost by optimizing the weight of material utilized for building the structure. An attempt has been made in this direction to reduce the volume of material. So in this paper we consider an industrial application project consisting of mass minimization of H frame type hydraulic press. This press has to compensate the forces acting on the working plates and has to fulfill certain critical constraints. Here we use implementation for analysis and optimization of hydraulic press. The aim of this paper is to integrate the mechanical system of hydraulic press with hydraulic system to facilitate the ease of operation to manufacture the smaller parts in a bulk. In the present scenario, time constrain is a crucial part for completion of any production process. Thus with the aid of automization, the production time can be reduced as well as higher degree of accuracy can be achieved as the human efforts will be alleviated. Thus an attempt has been made to provide the smooth and rapid functioning of press work with the help of hydraulic system.

Authors and Affiliations

Mohammed Iqbal Khatib
Assistant Professor, Mechanical Engineering Department Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Roshan Zameer Ahmed
Assistant Professor, Mechanical Engineering Department Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Md Saud Uddin
BE Scholar, Mechanical Engineering Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Mohammad Abdul Rahman
BE Scholar, Mechanical Engineering Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Mohd Rahman Shareef
BE Scholar, Mechanical Engineering Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Syed Akber
BE Scholar, Mechanical Engineering Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Majid Khan
BE Scholar, Mechanical Engineering Lords Institute of Engineering and Technology Hyderabad, Telangana, India
Shahin Shaikh
Assistant Professor, Mechanical Engineering Department J. B. I. T Hyderabad, Telangana, India

Hydraulic press, Frame Structure, Press work, Hydraulic cylinder, Optimization, Automation.

  1. Bhandari, V.B. (2009), “Design of Machine element”, Tata McGraw-Hill Education.
  2. Khurmi, R.S. and Gupta, J.K. (2005), “A Textbook of Machine Design”, Eurasia Publication House (P.V.T.) Ltd. 14th Edition.
  3. R.K. Bansal, Fluid Mechanics and Hydraulic Machines, Edn. 8, Laxmi Publications P.Ltd., 22 Golden House, Daryaganj, New Delhi.
  4. A Text Book of Fluid Mechanics and Hydraulic Machines – By, R. K Rajput and S. Chand & Co, Ram Nagar, New Delhi.
  5. Brian S. Elliott (2006), "Air-Over-Hydraulic Jacks", Compressed Air Operations Manual, McGraw-Hill Professional,
  6. S.Zhigiang, “Variations of Hydraulic Jack”, Auto Universal press, Shangai publication.
  7. Manar Abd Elhakim Eltantawie, “Design, manufacture and simulate a hydraulic bending press”, International journal of mechanical engineering and robotics research, Vol. 2, No. 1, January 2013.
  8. Jarmai. K and Farkas.J. “Optimal design of Hoist structure frame”. Department of Mechanical Engineering, University of Miskolc, Hungary. May 2003.
  9. Muni Prabaharan and V.Amarnath “Structural Optimization of 5Ton Hydraulic Press and Scrap Baling Press for Cost Reduction by Topology”, International Journal of Modeling and Optimization, Vol 1.

Publication Details

Published in : Volume 7 | Issue 2 | March-April 2020
Date of Publication : 2020-04-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 22-30
Manuscript Number : IJSRSET207210
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Mohammed Iqbal Khatib, Roshan Zameer Ahmed , Md Saud Uddin, Mohammad Abdul Rahman, Mohd Rahman Shareef, Syed Akber, Majid Khan, Shahin Shaikh , " Design and Fabrication of 5 Ton Hydraulic Press Machine, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 2, pp.22-30, March-April-2020. Available at doi : https://doi.org/10.32628/IJSRSET207210      Citation Detection and Elimination     |     
Journal URL : https://ijsrset.com/IJSRSET207210

Article Preview