IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET3401                                                     


Fabrication and Characterization of Aluminium Composite Reinfoced with Silicon Carbide And Areca Leaf Sheath Fiber Ash

Authors(6):

Abhijith T S, Akhil M S, Akshay Mohan E, Amal C, Favas Iqbal, Pradeesh A R
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Hybrid Aluminium Matrix Composites (HAMC) is of greater importance in the present industrial scenario due to its improved mechanical properties and low cost. In this study, HAMC having Aluminium (LM25) as matrix and silicon carbide (SiC), Areca Leafsheath Fiber Ash (ALFA) as reinforcements was fabricated using stir casting. 3%, 5%, 7% weight fractions of ALFA and 7%, 5%, 3%weight fractions of SiC respectively reinforced with the 90 % weight fraction of matrix to form three samples of different composition. Density measurement, estimated percentage porosity, tensile testing, impact testing, hardness testing, corrosion testing and Field Emission Scanning Electron Microscopy (FESEM) examination was used to characterize the samples. Results show that tensile strength of composite increases with decrease in ALFA content and elongation is least for 5% of each reinforcements.Hardness and impact energy remains same with different ALFA compositions.Density decreases with increase in ALFA content. FESEM result shows agglomerated reinforcements in compositions except insample with 5% SiC and 5% ALFA. For composition with 5% sic and 5%ALFA shows uniform distribution. Good corrosion resistance of Aluminium was reflected on the samples.

Abhijith T S, Akhil M S, Akshay Mohan E, Amal C, Favas Iqbal, Pradeesh A R

Hybrid Composite, stir casting, Areca Leaf Sheath Fibre Ash,SiC

  1. V. S. Aigbodion, S. B. Hassan, E. T. Dauda, and R. A. Mohammed, "The development of mathematical model for the prediction of ageing behaviour for Al-Cu-Mg/Bagasse ash particulate composites," Tribol. Ind., vol. 32, no. 3, pp. 13–18, 2010.
  2. K. K. Alaneme, P. A. Olubambi, A. S. Afolabi, and M. O. Bodurin, "Corrosion and tribological studies of bamboo leaf ash and alumina reinforced Al-Mg-Si alloy matrix hybrid composites in chloride medium," Int. J. Electrochem. Sci., vol. 9, no. 10, pp. 5663–5674, 2014.
  3. K. K. Alaneme, T. M. Adewale, and P. A. Olubambi, "Corrosion and wear behaviour of Al-Mg-Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide," J. Mater. Res. Technol., vol. 3, no. 1, pp. 9–16, 2014.
  4. A. Bahrami, N. Soltani, M. I. Pech-Canul, and C. A. Gutiιrrez, "Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives," Crit. Rev. Environ. Sci. Technol., vol. 46, no. 2, pp. 143–208, 2016.
  5. E. Bayraktar and D. Katundi, "Development of a new aluminium matrix composite reinforced with iron oxide ( Fe 3 O 4 )," Manuf. Eng., vol. 38, no. 1, pp. 7–14, 2010.
  6. M. O. Bodunrin, K. K. Alaneme, and L. H. Chown, "Aluminium matrix hybrid composites: A review of reinforcement philosophies; Mechanical, corrosion and tribological characteristics," J. Mater. Res. Technol., vol. 4, no. 4, pp. 434–445, 2015.
  7. O. B. Fatile, J. I. Akinruli, and A. A. Amori, "Microstructure and Mechanical Behaviour of Stir-Cast Al-Mg-Sl Alloy Matrix Hybrid Composite Reinforced with Corn Cob Ash and Silicon Carbide," vol. 4, no. 4, pp. 251–259, 2014.
  8. P. B. Madakson, D. S. Yawas, and A. Apasi, "Characterization of Coconut Shell Ash for Potential Utilization in Metal Matrix Composites for Automotive Applications," Int. J. Eng. Sci. Technol., vol. 4, no. 3, pp. 1190–1198, 2012.
  9. R. Nelson, "Design and development of Fly ash reinforced aluminium matrix composite using friction stir process ( FSP )," pp. 883–887, 2001.
  10. J. E. Oghenevweta, V. S. Aigbodion, G. B. Nyior, and F. Asuke, "Mechanical properties and microstructural analysis of Al–Si–Mg/carbonized maize stalk waste particulate composites," J. King Saud Univ. - Eng. Sci., 2014.
  11. D. S. Prasad, C. Shoba, and N. Ramanaiah, "Investigations on mechanical properties of aluminum hybrid composites," J. Mater. Res. Technol., vol. 3, no. 1, pp. 79–85, 2014.
  12. S. R. Rao and G. Padmanabhan, "Fabrication and mechanical properties of aluminium-boron carbide composites," Int. J. Mater. Biomater. Appl., vol. 2, no. 3, pp. 15–18, 2012.
  13. R. Singh and R. Singla, "Tribological characterization of aluminium-silicon carbide composite prepared by mechanical alloying," Int. J. Appl. Eng. Res., vol. 7, no. 11 SUPPL., pp. 1420–1423, 2012.
  14. M. Singla, D. D. Dwivedi, L. Singh, and V. Chawla, "Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite," Procedia Mater. Sci., vol. 8, no. 6, pp. 455–467, 2009.
  15. D. and A. R. K. Siva Prasad, "Production and Mechanical Properties of A356 . 2 / RHA Composites," Int. J. Adv. Sci. Technol., vol. 33, pp. 51–58, 2011.

Publication Details

Published in : Volume 3 | Issue 4 | March-April - 2017
Date of Publication Print ISSN Online ISSN
2017-04-30 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
01-05 IJSRSET3401   Technoscience Academy

Cite This Article

Abhijith T S, Akhil M S, Akshay Mohan E, Amal C, Favas Iqbal, Pradeesh A R, "Fabrication and Characterization of Aluminium Composite Reinfoced with Silicon Carbide And Areca Leaf Sheath Fiber Ash", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 4, pp.01-05, March-April-2017.
URL : http://ijsrset.com/IJSRSET3401.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)