IJSRSET calls volunteers interested to contribute towards the scientific development in the field of Science, Engineering and Technology

Home > IJSRSET3408                                                     


Design Fabrication and Performance Analysis of Stirling Engine

Authors(6):

Prabhuraj C U, Prasad K V, Shabin Varghese P, Prasanth P, Arundas T, Sabareesh S
  • Abstract
  • Authors
  • Keywords
  • References
  • Details
Under the assumption that the rate of population growth is constant and the consumption rate of energy is same as to date, then the energy reservoir will vanish within 320 years. We have to think about an engine, which is working under fixed quantity of working medium (air or inert gas) and heat energy from the any resource (solar, coal, bio fuel etc., but not petrol or diesel). This is what we are going to achieve by this work by fabricating a stirling engine, which is actually an external combustion engine working under a fixed quantity of air as a working medium. Studies were already conducted on this type of engine by changing various heating (solar, bio fuel etc.,) and cooling methods, but, to the best of our knowledge nobody were conducted its performance by varying the displacer length. Our project involves the design and fabrication of a stirling engine model and its detailed performance analysis with respect to the length of displacer. Displacer is an important part in the stirling engine with direct the working medium from the hot end to cold end or vice versa. Changing the dimension of the displacer will change the volume available in the working cylinder and hence changes the available quantity of the working medium. Accurate study is essential to have an idea about the performance under this varying condition of the displacer. In this work, we constructed a model of the stirling engine from a design in which had a provision to adjust the displacer length. After conducting the test, it found that, the displacer dimension severely effecting the performance. The optimum length found to be in between 35 mm and 40 mm for the model analyzed.

Prabhuraj C U, Prasad K V, Shabin Varghese P, Prasanth P, Arundas T, Sabareesh S

Stirling Engine, Energy, Design, Performance Analysis.

  1. Erich P. Electricity production in rural villages with a biomass Stirling engine. Renewable Energy     1999;16:1049e52.
  2. Shoureshi R. Analysis and design of Stirling engines for waste-heat recovery, Ph.D. thesis, M.I.T., 1981.
  3. Makhkamov K, et al. Development of solar and micro co-generation power installations on the basis of Stirling engines, AIAA-2000-2931, pp 723e733.
  4. Walker G. Stirling engine. New York: Oxford University Press; 1980.
  5. West CD. Principles and applications of Stirling engines. 15-63. New York: Van Nostrand Reinhold Company; 1986.
  6. Miyabe H, Takahashi S, Hamaguchi K. An approach to the design of Stirling engine regenerator matrix using packs of wire gauzes, Proc. 17th IECEC, pp.1839e1844, 1982.
  7. Biedermann F, Carlsen H, Schoech M, Obernberger I. Operating experiences with a small-scale CHP pilot plant based on a 35 kWel hermetic four cylinder Stirling engine for Biomass fuels, The 11th International Stirling Engine Conference, Rome, November 19e21, 2003.
  8. Thomas M. Dish-Stirling systems: an overview of development and status. Journal of Solar Energy Engineering, Trans. ASME 2003;125:135e51.

Publication Details

Published in : Volume 3 | Issue 4 | March-April - 2017
Date of Publication Print ISSN Online ISSN
2017-04-30 2395-1990 2394-4099
Page(s) Manuscript Number   Publisher
42-47 IJSRSET3408   Technoscience Academy

Cite This Article

Prabhuraj C U, Prasad K V, Shabin Varghese P, Prasanth P, Arundas T, Sabareesh S, "Design Fabrication and Performance Analysis of Stirling Engine", International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 3, Issue 4, pp.42-47, March-April-2017.
URL : http://ijsrset.com/IJSRSET3408.php

IJSRSET Xplore

Subscribe

Conferences

National Conference on Advances in Mechanical Engineering 2017(NCAME 2017)

National Conference on Emerging Trends in Civil Engineering 2017( NCETCE 2017)