A Study of Non-Conventional Grinding Machine Powered By Solar Energy

Authors(6) :-Chaurasia Praveenkumar D, Parmar Ketankumar B , Chauhan Hardik K, Jagtap Kalpesh S, Mrs. Tejal M Rana , Mr. Mayur Ghori

Nowadays every one focus on various pneumatic application in industrial areas because due to the continuous availability of compressed air in industry. It is possible to drive the number of applications using pneumatic circuit. So, by choosing the same way of study for improvement of Grinding Machine efficiency. The main objective is to reduce the power requirement to drive the grinding machine with the help of using pneumatic system. If solar panel is introduce in this system to reduce power consumption then as capacity of grinding machine increases the size of solar panel as increases, so to reduce size of solar panel ,there is another alternative option to choose pneumatic system to reduce power consumption of grinding ,so solar pneumatic system is essential for reducing power consumption and increases efficiency in sense of material removal rate(MRR). Grinding process is most important phenomenon to improve the surface finish in industrial purpose and it can easily handle the grinding tool So, this study will definitely do this kind of work. Further improvement in this work is to change the various tools and their size for number of application. The assembly of solar Pneumatic Grinding Machine is very simple and the working is so efficient.

Authors and Affiliations

Chaurasia Praveenkumar D
U.G. Student, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India
Parmar Ketankumar B
U.G. Student, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India
Chauhan Hardik K
U.G. Student, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India
Jagtap Kalpesh S
U.G. Student, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India
Mrs. Tejal M Rana
U.G. Student, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India
Mr. Mayur Ghori
Assistant Professor, Mechanical Engineering, Sigma Institute of Engineering, Vadodara, Gujarat, India

Grinding machine, Solar System , Pneumatic System , Efficiency, Power consumption, MRR

  1. CY Yeo,S.C. Tam,S. Jana,Micheal W.S. Lau “A technical review of laser grinding of aerospace materials” Journal of materials processing technology 42 (1994) 15-49
  2. Wen Jialing and Wen Pengfei “The simulation and optimization of aspheric plastic lens injection molding”. Vol.20 No. 2 Journal of Wuhan University of Technology Jun 2005
  3. Mohan Sen,H. S. Shan “A review of electrochemical macro to micro grinding processes” International journal of machine tool and manufacture 45(2005) 137-152.
  4. Kostantinos Salonitis, Aristidis Strournaras,George Tsoukantas,Panagiotis Stravropoulos,George Chryssolouris “A theoretical and experimental investigation on limitations of pulsed laser grinding” Journal of material processing technology 183 (2007) 96-103.
  5. J Gurauskis,D.Sola,J.I. Pena,V.M. Orera “Laser grinding of Ni-YSZ cermet” Journal of European ceramic society 28 (2008) 2673-2680
  6. Nourredine Boubekri “An investigation in grinding 1020 steel using minimum quality lubrication” Vol. 1 No. 5; September 2011.
  7. yogendra Tyagi,Vedansh Chaturvedi,Jyoti Vimal “Parametric optimization of CNC Grinding machine for mild steel using Taguchi design and Signal to Noise ratio Analysis” International Journal of Engineering Science and Technology (IJEST)Volume 4 No-8 August 2012.
  8. Timur Canel,A. Ugur Kaya,Bekir Celik “Parameter optimization of nanosecond laser for micro grinding on PVC by Taguchi method” Optics and laser technology 44 (2012) 2347-2353.
  9. Mr PN.E. Naveen, Mr. M. Yasaswi, Prof. R. V. Prasad “Experimental investigation of grinding parameters on composite materials” (ISORJMCE) 2278-1684 Vol.2, Issue 3 (sep-Oct 2012), pp. 30-37.
  10. Thiren G. Pokar,Prof. V. D. Patel “Optimization and modeling of micro grinding process parameters” IJMER Vol. 1, Issue 2, March 2013
  11. BShivapragash,K.Chandrasekaram,C.Parthasarathy,M.Samuel “Multiple response optimization in grinding using taguchi and grey relational analysis” (IJMER) Vol. 3, Issue 2, March April 2013,pp-765-768.

Publication Details

Published in : Volume 4 | Issue 5 | March-April 2018
Date of Publication : 2018-04-10
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 738-741
Manuscript Number : ME039
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Chaurasia Praveenkumar D,Parmar Ketankumar B , Chauhan Hardik K, Jagtap Kalpesh S, Mrs. Tejal M Rana , Mr. Mayur Ghori, " A Study of Non-Conventional Grinding Machine Powered By Solar Energy, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 5, pp.738-741, March-April.2018
URL : http://ijsrset.com/ME039

Follow Us

Contact Us