Design, Analysis and Simulation of Compact Cycloidal Drive

Authors

  • Palliprath Naveen  Apollo Micro System Limited (AMS) , IDA-Mallapur, Uppal Mandal, R.R., India
  • MSSR. Ravi Kiran  Sreenidhi Institute of Science and Technology (SNIST), Ghatkeshar, Hyderabad, India
  • Emani Venkata Sai Siva Sankaram  Sreenidhi Institute of Science and Technology (SNIST), Ghatkeshar, Hyderabad, India
  • Tirupathi Mani Bharadwaj  Sreenidhi Institute of Science and Technology (SNIST), Ghatkeshar, Hyderabad, India

DOI:

https://doi.org/10.32628/IJSRSET207547

Keywords:

Solid works, 17-4 Ph steel, Gear, Output Shaft, Input Shaft

Abstract

Gear’s are used for power transmission. There are various types of gears used for various purposes. Some various gears are as follows spur gears, helical gears, bevel gears, worm gear, etc. In this paper we are going to discuss briefly about the cycloidal gears and their future scope in the field of science. A cycloidal gear is mainly used to increase or decrease the speed. We are going to use it to decrease the speed while increasing the accuracy of the projectile. In this paper we are going to consider the cycloidal gears for the projectile of the missile. There can be of Single stage or multi-stage depending on the gear ratio that is required. After comparison with the other types of gearbox and speed reducers maximum reduction of gear ratio is achieved by cycloidal speed reducer

References

  1. Litvin, F., 1989, Theory of Gearing, NASA, Washington DC.
  2. Ltivin, F. L. , 1994, Gear Geometry and Applied Theory, Prentice-Hall, Englewood Cliffs, NJ.
  3. https://www.tec-science.com/mechanical-power-transmission/cycloidal-drive-speed-reducer-gear/how-does-a-cycloidal-gear-drive-work/
  4. Yan, H., and Lai, T., 2002, “Geometry Design of an Elementary Planetary Gear Train With Cylindrical Tooth Profiles,” Mech. Mach. Theory 0094-114X, 37(8), pp. 757–767

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2020-10-30

Issue

Volume 7, Issue 5, September-October-2020

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Palliprath Naveen, MSSR. Ravi Kiran, Emani Venkata Sai Siva Sankaram, Tirupathi Mani Bharadwaj "Design, Analysis and Simulation of Compact Cycloidal Drive" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 5, pp.216-220, September-October-2020. Available at doi : https://doi.org/10.32628/IJSRSET207547