AIR Pollution Monitoring System
Keywords:
Air pollution, sensor, IOT, pH detector.Abstract
The position of pollution is adding fleetly due to factors like diligence, urbanization, adding in population, vehicle use which can affect mortal health. IOT Based Air Pollution Monitoring System is used to cover the Air Quality over a web server using Internet. It'll spark an alarm when the air quality goes down beyond a certain position, means when there's sufficient amount of dangerous feasts present in the air like CO2, smoke, alcohol, benzene, NH3 and NOx. It'll show the air quality in on the LCD so that air pollution can be covered veritably fluently. The system uses MQ5 detector for covering Air Quality as it detects most dangerous feasts and can measure their quantum directly and it's largely sensitive SnO2. A pH detector is one of the most essential tools that’s generally used for water measures. This type of detector is suitable to measure the quantum of alkalinity and acidity in water and other results. When used rightly, pH detectors are suitable to insure the safety and quality of a product and the processes that do within a waste water or manufacturing factory.
References
- World Health Organization. (2016). Mortality and Burden of Disease from Ambient Air Pollution. [Online]. Available: https://www.who.int/gho/phe/ outdoor_air_pollution/burden/en/
- Air Resource Management Centre, “Vehicle-related air pollutants and public health,” Ministry of Environment and Natural Resources, Sri Lanka, May 2003, pp. 6–11.
- Urban Air Quality Management Project, “Impact of fuel changes on exhaust and evaporative emissions,” Ministry of Environment and Natural Resources, Sri Lanka, May 2003, pp. 75–85.
- S. Kelly, N. Suryadevara, and S. Mukhopadhyay, “Towards the Implementation of IoT for Environmental Condition Monitoring in Homes,” Sensors Journal, IEEE, vol. 13, no. 10, pp. 3846–3853, Oct. 2013.
- H. Yang, Y. Qin, G. Feng, and H. Ci, “Online Monitoring of Geological CO2 Storage and Leakage Based on Wireless Sensor Networks,” Sensors Journal, IEEE, vol. 13, no. 2, pp. 556–562, Feb. 2013.
- X. Mao, X. Miao, Y. He, X.-Y. Li, and Y. Liu, “CitySee: Urban CO2 monitoring with sensors,” in INFOCOM, 2012 Proceedings IEEE, Mar. 2012, pp. 1611–1619.
- C. Peng, K. Qian, and C. Wang, “Design and Application of a VOC Monitoring System Based on a ZigBee Wireless Sensor Network,” Sensors Journal, IEEE, vol. 15, no. 4, pp. 2255–2268, Apr. 2015.
- O. Postolache, J. Pereira, and P. Girao, “Smart sensors network forair quality monitoring applications,” Instrumentation and Measurement, IEEE Transactions on, vol. 58, no. 9, pp. 3253–3262, Sept 2009.
- J.-Y. Kim, C.-H. Chu, and S.-M. Shin, “ISSAQ: An Integrated Sensing Systems for Real-Time Indoor Air Quality Monitoring,” Sensors Journal, IEEE, vol. 14, no. 12, pp. 4230–4244, Dec. 2014.
- J. Yang, C. Zhang, X. Li, Y. Huang, S. Fu, M.F. Acevedo. Integration of wireless sensor networks in environmental monitoring cyber infrastructure. Wireless Networks, Springer/ACM, Volume 16, Issue 4, pp. 1091-1108, May 2010
- IST, “Gas sensor calibration,” International Sensor Technology, CA, USA, Ch. 11, pp. 161–173.
- D. D. Lee and D. S. Lee, “Environmental gas sensors,” IEEE Sensors J., vol. 1, no. 3, pp. 214–215, Oct. 2001.
- Capteur Sensors, “Principle of operation,” General Information on the Capteur NGL07 Carbon Monoxide Sensors, Capteur Sensors, U.K., 2000, pp. 1–13.
- N. Kularatna and B. H. Sudantha, "An Environmental Air Pollution Monitoring System Based on the IEEE 1451 Standard for Low Cost Requirements," in IEEE Sensors Journal, vol. 8, no. 4, pp. 415-422, April 2008.
- Vujovic, V., Maksimovic, M., “Raspberry Pi as a Wireless Sensor node: Performances and constraints,” Information and Communication Technology, Electronics and Microelectronics
Downloads
Published
Issue
Section
License
Copyright (c) IJSRSET
This work is licensed under a Creative Commons Attribution 4.0 International License.