Physical Properties of Composite Based on Sugar Palm Stem Powder

Authors

  • Muhammadin Hamid  Department of Physics, University of Sumatera Utara, Medan, Sumatera Utara, Indonesia
  • Timbangen Sembiring  Department of Physics, University of Sumatera Utara, Medan, Sumatera Utara, Indonesia
  • Kurnia Sembiring  Department of Physics, University of Sumatera Utara, Medan, Sumatera Utara, Indonesia

DOI:

https://doi.org/10.32628/IJSRSET1962151

Keywords:

Sugar Palm Stem Powder, Composite, Physical Properties

Abstract

Composite based on sugar palm stem powder has been made through conventional technique of mold and press from the sugar palm stem powder reinforced by matrix polyester resin, epoxy resin, and polyurethane resins. The composition of sugar palm stem powder were varied with 2;4;6;8 and 10% wt mass fraction also the 90;92;94;96 and 98 % wt mass fraction are enhanced by the polyester resin, epoxy resin and polyurethane resins in 300 MPa pressure treated with temperature of 120?C for polyurethane resin and temperature of 70?C for polyester resin and epoxy resin for 20 minutes. The test result of physical properties generates 1.19 gr/cm³ of the density optimum number, 1.83% porosity, and 2.83% water absorption. The study shows the physical properties which meet the Standard JIS A 5905 : 2003, that is 0.3 – 1.3 gr/cm3 density.

References

  1. American Society For Testing and Material, Standart Test Methods for Physical Testing of Gypsum Panel Products, 2007, P A ASTM Standart C473 (97), page 2 Wes Conshihicken
  2. Artur,Sergio,Foluke.2017. Charpy Impact Tenacity of Epoxy Matrix Composites Reinforced With Aligned Jute Fibers. JMRTEC 296
  3. ASTM, Annual Book of ASTM Standart, West Conshihicken, 2003
  4. Banea, 2009. “Adhesive bonded joints in composite materials: an overview, Journal of Materials Design and Applications 2009, 1Instituto de EngenhariaMecânica (IDMEC), Porto, Portugal
  5. Badan Pusat Statistik (BPS). 2017. Luas Tanaman dan Produksi Aren Tanaman Perkebunan Rakyat menurut Kabupaten/Kota, 2016.
  6. Fauzi. 2016. Karakteristik Beton Polimer dari Batu Apung dan Limbah Padat Benang Karet Dengan Poliuretan sebagai Ikatan Alami.USU : Medan
  7. Ishak, M.R, et.al. 2013. Sugar Palm (Arenga pinnata): Its Fibres, Polymers, and Composites. Elsevier. Carbohydrate Polymers, 91 pp 699-710
  8. ISO (International Standart Organization), 1987, 8335 (Cement bonded particleboards – boards of portland or aquivalent cementn reinforced with fibrous wood particles )
  9. Jones, M.R.,1999. Mechanics Of Composite Material, Mc Graww Hill Kogakusha, Ltd.
  10. Kristiarawati. 2016. Pembuatan dan Karakterisasi Papan Partikel dari Serat Kulit Durian dengan resin polyester. Medan : FMIPA USU
  11. Marito,S. 2009. Pemanfaatan Kulit Kerang dan Resin Epoksi Terhadap Beton Polimer.Magister Fisika.Fakultas MIPA. Universitas Sumatera Utara.
  12. Michael, HW.1998, Stress and Analysis of Fiber Rein Forced Composite Material, Mc Graw Hill International Edition.
  13. Renliang,Weiwei.2018. The Reinforcing effects of dendritic short carbon fibers for rigid polyurethane composite. CSTE 7490
  14. Sapuan,S.M.1998. Concurrent Engineering Design System For Polymeric Based Composite Automotive Components, De Montfort University,UK,Ph.D Thesis
  15. Sembiring,T,Sitepu,E,RiannaM.2008. Study and Characterization of the sugar palm tree fiber composite for neutron radiation shield.
  16. Surbakti,E. 2015. Preparation and characterization of composite matrix epoxy with corn husk fiber , Undergraduate Thesis, USU, Medan
  17. Wu Change,Yang Kang,Yuzhou Zu.2018. Mechanical Properties and Impact performance of silk epoxy resin composites modulated by flax fibres. JCOMA 5266
  18. Yuliana,Ade.2016. Characteristic Physics and Mechanic Polymer Composite of Styrofoam Waste, Asphalt, Nut Fiber and Black Sand. Undergraduate Thesis , USU, Medan

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2019-04-30

Issue

Volume 6, Issue 2, March-April-2019

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Muhammadin Hamid, Timbangen Sembiring, Kurnia Sembiring "Physical Properties of Composite Based on Sugar Palm Stem Powder" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 2, pp.571-577, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRSET1962151