Hydrodyamic Study of Newtonian Fluid Flow Over A Sphere Using CFD Models

Authors

  • Repalla Mohammed Azeem  M.Tech Student, CAD/CAM, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India
  • N. Karthikeyan  Assistant Professor, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India
  • L. Balasubramanyam  HOD & Associate Professor, Department of Mechanical Engineering, PVKK Institute of Technology, Ananthapuramu, Andhra Pradesh, India

DOI:

https://doi.org/10.32628/IJSRSET196441

Keywords:

Newtonian Media, Hydrodynamics, Modeling, CFD

Abstract

The objective of this project is modeling and simulation of a sphere rolling down an incline with constant angular velocity in an incompressible Newtonian media by using CFD techniques. Study on the hydrodynamics of the Newtonian fluid flow over the sphere has also been done. Comparison of velocity has been done for various types of fluids. Comparison of velocity has also been done for several angles of inclination and the angular velocity of the ball is also changed for each of these cases. Analysis and discussion of the motion of the sphere has been done using velocity contours.

References

  1. Bhaskaran Rajesh, Collins Lance, Introduction to CFD Basics Cengel Y.A, Cimbala J.M, Fluid Mechanics: fundamentals and application, New York, Tata McGraw-Hill Education, 2010
  2. Chhabra R.P, Agarwal L., Sinha N.A, Drag on Non-Spherical Particles: an evaluation of available methods, Elsevier Science, 101(1999), pp. 288-295
  3. Gabitto J, Tsouris C., Drag coefficient and settling velocity for particles of cylindrical shape, Powder Technology, 183 ( 2008), pp. 314-322
  4. Houghton L.E, Carpenter P.W., Collicott S.H., Valentine T. D., Oxford, Elsevier, 26-Feb-
  5. http://en.wikipedia.org/wiki/Drag_(physics)
  6. J. Patrick Abulencia, Louis Theodore, Fluid Flow for the Practising Chemical Engineer, John Wiley & Sons, 2009
  7. McCabe L.W., Smith C.J., Harriot P., Unit Operations of Chemical Engineering, Singapore, Mc Graw Hill, 2005
  8. Morrison A. F., Data Correlation for Drag Coefficient for Sphere, Michigan Technological University, Houghton
  9. Jalaal M . An analytical study on motion of a sphere rolling down an inclined plane submerged in a Newtonian fluid , Elsevier Science, Powder Technology 198, 2009
  10. Manglik, R. M. and Bergles, A. E. (1993), Heat transfer and pressure drop correlations for twisted tape insert in isothermal tubes. Part 1: laminar flows. Trans. ASME, J. Heat Transfer, Vol. 116, pp. 881–889.
  11. Kumar, A. and Prasad, B. N. (2000), Investigation of twisted tape inserted solar water heater heat transfer, friction factor and thermal performance results. Renewable Energy, vol. 19, pp. 379–398.
  12. Mekala P., Kunuthur M.R., Chandramohana Reddy B. (2019) Evaluation of the Mechanical Properties of Recycled Jute Fiber–Reinforced Polymer Matrix Composites. In: Vasudevan H., Kottur V., Raina A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore DOI https://doi.org/10.1007/978-981-13-2490-1_26
  13. AI-Fahed, S. and Chakroun, W. (1996), Effect of tube tape clearance on heat transfer for fully developed turbulent flow in a horizontal isothermal tube. Int. J. Heat and Fluid Flow, Vol.17, pp. 173–178.
  14. Rao, M. M. and Sastri, V. M. K. (1995), Experimental investigation for fluid flow and heat transfer in a rotating tube twisted tape inserts. Int. J. Heat and Mass Transfer, Vol. 16, pp. 19–28.
  15. Sivanshanmugam, P. and Sunduram, S. (1999), Improvement in performance of heat exchanger fitted with twisted tape. J. Energy Engg, Vol.125, pp. 35–40.
  16. Agarwal, S. K. and Raja Rao, M. (1996), Heat transfer augmentation for flow of viscous liquid in circular tubes using twisted tape inserts. Int. J. Heat Mass Transfer, Vol. 99, pp.3547–
  17. Kunuthur M.R., Reddy B.C. (2019) Investigation of Moisture Absorption in Jute Fiber Polymer Matrix Composites. In: Vasudevan H., Kottur V., Raina A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore DOIhttps://doi.org/10.1007/978-981-13-2490-1_34
  18. Chung, S. Y. and Sung, H. J. (2003), Direct numerical simulation of turbulent concentric annular pipe flow. Part 2: heat transfer.Int. J. Heat and Fluid Flow, Vol. 24, pp.399–411.
  19. Gupte, N. S. and Date, A. W. (1989), Friction and heat transfer characteristics of helical turbulent air flow in annuli. Trans.ASME, J. Heat Transfer, Vol. 111, pp. 337–344.
  20. Rahimi, M. Shabanian, S.R. Alsairafi. A.A. (2009), Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts, Chemical Engineering and Processing, Vol.48, pp.762–770
  21. Murugesan, P. Mayilsamy, Suresh, K. (2010), Heat Transfer and Friction Factor Studies in a Circular Tube Fitted with Twisted Tape Consisting of Wire-nails, Chinese Journal of Chemical Engineering, Vol. 18, pp. 1038-1042

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2019-08-30

Issue

Volume 6, Issue 4, July-August-2019

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Repalla Mohammed Azeem, N. Karthikeyan, L. Balasubramanyam "Hydrodyamic Study of Newtonian Fluid Flow Over A Sphere Using CFD Models" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 4, pp.316-320, July-August-2019. Available at doi : https://doi.org/10.32628/IJSRSET196441