Experimental Study on the Effect of Annealing on Fatigue Life of SS 304 Steels
DOI:
https://doi.org/10.32628/IJSRSET207131Keywords:
Fatigue, Annealing, Heat Treatment, Low Cycle Fatigue, SS 304Abstract
Fatigue failure is one of the main reasons for the mechanical failure in engineering materials. To improve the fatigue strength of the material one of the most used method is heat treatment of the materials in which hardness, wear resistance and aesthetics is improved. Of late, the complexity of predicting fatigue life of engineering components is increasing exponentially due to the varied and multi-facet loading conditions, complex geometries, and newer materials coming up in the market. In this paper the the quantitative measurement of the influence of Annealing on the fatigue life of SS 304 steels. Theresults conculed clearly clearly that there is a definite improvement in the fatigue life due to Annealing in steel. However the extent of improvement in fatigue life was more in SS 304 (after annealing) when compared to SS 304(before annealing).
References
- Fatigue of materials, S.Suresh, 3rd edition, The Press Syndicate , 2003
- Structural composite materials, F.C Campbell, ASM International, 2010
- Design of Pressure vessels for Low-cycle fatigue by B.F. Langer, Westinghouse Electric Corporation, Pittsburgh, Pa.
- M. A. Rahmat, R. N. Ibrahim, R. H. Oskouei and A. R. Bushroa (2015) Fatigue life behaviour of TiAlN and TiAlN/CrN coated notched P20 steel Specimens Wiley Publishing Ltd. Fatigue Fract Engng Mater Struct, 2016, 39, 57–67
- Sumith Kumar, Pusuluri Sriharsha, Samatham Madhukar and Birudala Raga Harshith Reddy (June 2017) “Experimental Investigation on Ceramic Surface Coatings on Aluminum using Detonation Gun” ijcet, Vol.7, No.3
- D. Arola, A. E. Alade, and W. Weber (2006) Improving Fatigue Strength of Metals using Abrasive water jet peening, Machining Science and Technology, 10:197–218Copyright, Taylor & Francis Group, LLC
- Weimin Zhao, Timing Zhang, Ruofei Xin, Manman Wang, Hua Ai, Jianbo Sun, and Yong Wang (2015) Effects of Thermally Sprayed Aluminum Coating on the Corrosion Fatigue Behavior of X80 Steel in 3.5 wt.% NaCl, Journal of Thermal Spray Technology ,974—Volume 24(6) August
- samatham Madhukar, A V Vishnu Vardhan Reddy, N Vamshidhar Reddy and Patlolla Srujan Reddy, Experimental Investigation on Effect of Heat Treatment on Mechanical Properties of Steels and Titanium , International Journal of Current Engineering and Technology, Vol.7, No.3 (June 2017),pp.845-850. E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ,Available at http://inpressco.com/category/ijcet
- Ali S.Yasir (2014) Improving the fatigue life of steel bars by using Nano-coating technology International Journal of Engineering & Technology, 3 (4) 523-528
- A textbook of engineering materials and metallurgy by A. Alavudeen, N. Venkateshwaran, J. T. Winowlin Jappes, 1st ed. Laxmi Publications, 2006
- Samatham Madhukar , Birudala Raga Harshith Reddy, Gyara Ajay Kumar , Ramawath Prashanth Naik ,A Study on Improvement of Fatigue Life of materials by Surface Coatings International Journal of Current Engineering and Technology, Vol.8, No.1 (Jan/Feb 2018), pp.5-9 , E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ,Available at http://inpressco.com/category/ijcet
- Steel heat treatment handbook, Steel Heat treatment: Equipment and process design by George E. Totten, 2nd ed. Taylor & Francis group, 2006
- Springer handbook of Mechanical engineering, volume 10 by Karl-Heinrich Grote, Erik K. Antonsson
- Pressure vessels: the ASME code simplified by Robert Chuse, McGraw-Hill, 01-May-1977
- Stainless Steels for design engineers by Michael F. McGuire, ASM International, 2008
Downloads
Published
Issue
Section
License
Copyright (c) IJSRSET

This work is licensed under a Creative Commons Attribution 4.0 International License.