Design of Smart Battery Management System for Electric Vehicle

Authors

  • Jeevak S. Lokhande  M.Tech Scholar, Department of Electrical Engineering, G H Raisoni College of Engineering, Nagpur, Maharashtra, India
  • Dr. P. M. Daigavhane  Professor, Department of Electrical Engineering, G H Raisoni College of Engineering, Nagpur, Maharashtra, India
  • Dr. Mithu Sarkar  Assistant Professor, Department of Electrical Engineering, G H Raisoni College of Engineering, Nagpur, Maharashtra, India

Keywords:

Distribution Network, Distribution Transformer, Electrical System, Communication Technology

Abstract

The Battery is the most basic part of the Electric Vehicle, which serves as a major source of energy and gives it sustainable mobility. In electric vehicles, the technology that is highly recognized and used for energy storage is based on lithium chemistry. Nevertheless, the room for research is still open. This involves the collection of materials for the development of cells. The development of algorithms and the design of electronic circuits for a better and more efficient use of batteries is also one area of study. It is important to keep an eye on the critical operating parameters of the battery during charging for the optimum output of the batteries. A battery management system (BMS) is one of those mechanisms for monitoring internal and ambient battery temperature, current, voltage, and charging and discharge operations. Within this paper we speak about some of the popular battery control methods and framework. We also speak about the state-of-the-art device criteria for optimum battery efficiency and its general architecture.

References

  1. Sajidur Rahman, Shimanta Kumar Dey, Bikash Kumar Bhawmick, Nipu Kumar Das,"Design and implementation of real time transformer health monitoring system using GSM technology", International Conference on Electrical, Computer and Communication Engineering (ECCE),IEEE 2017.
  2. Rohit R. Pawar, S. B. Deosarkar ,"Health condition monitoring system for distribution transformer using Internet of Things (IoT)", International Conference on Computing Methodologies and Communication (ICCMC),IEEE 2017
  3. Majid Ali, Adnan Yousaf, Fuad Usman, "Designing and simulation of load control & monitoring system through Demand Side Management technique",8th International Renewable Energy Congress (IREC),IEEE 2017.
  4. Rashmi Ashok Panherkar, Prajakta Vaidya,“ Transformer parameter monitoring system using PROTEUS software", Second International Conference on Electrical, Computer and Communication Technologies (ICECCT),IEEE 2017.
  5. Kazi Ahmed Asif Fuad, Md. Maruf Ibne Hasan, Laila Nawsheen Manzoor, Mohammad Abdul Mannan,"Design and simulation of centralized load controlled automated power system network (CLCAPSN)",IEEE International WIE Conference on Electrical and Computer Engineering (WIECON-ECE), IEEE 2015.
  6. Qin Zhou, ZhengCai Fu,"Research and implement of cost-effective remote transformer monitor system", International Conference on High Voltage Engineering and Application, IEEE 2012.
  7. Alfonso de Pablo, Walter Ferguson, Anatoliy Mudryk, Dmytro Golovan,"On-line condition monitoring of power transformers: A case history", Electrical Insulation Conference (EIC), IEEE 2011.
  8. Chelladurai E. Denny, Kumar A. Santosh, Manish Yadav, A. Venkatasami,"Design review as a diagnostic tool for power transformers — A case study", International Conference on Condition Monitoring and Diagnosis, IEEE 2008.
  9. Shuangzan Ren, Xu Yang, Wenhu Yang, Baofeng Xi, Xiaolong Cao,“ Research on Insulation Condition Monitoring System for Power Transformers", International Conference on Condition Monitoring and Diagnosis, IEEE 2008.
  10. V. Rusov, S. Zhivodernikov,"Transformer condition monitoring", International Conference on Condition Monitoring and Diagnosis, IEEE 2008
  11. Drasko Furundzic, Zeljko Djurovic, Vladimir Celibic, and Iva salom. “Neurel Network Ensemble for Power Transformers
  12. Fault Detection,” 11th symposium on Neural Network in Electrical Engineering.
  13. Suraj Pardeshi .Ramakant Mahajan , Uma Mahesh Pasumarthi,and Rohith KumarArora, “Multiprocessor based architecture for Online Condition Monitoring of Transformers,”2012 IEEE International Conference on condition Monitoring and Diagonosis 23-27 September 2012,Bali,Indonosia Mallikarjun Sarsamba, Prashanth Sangulagi, Dr.Raju Yanamshetty, “The load monitoring and Protection on Electricity Power lines using GSM network ,” International journal of Advanced Research in Computer Science and Software Engineering , vol-3, Issue 9, September 2013 ISSN:2277 128X.
  14. SatyaKumar Behera, RaviMasand and Dr.S.P.Shukla, “A review of Transformer Protection by using PLC system”, International journal of Digital Application & Contemporary Research, (Volume 3,Issue 2,September2014).
  15. Vishwanath R, Akshatha V Shetty, Poonam, Shamilli, M Thanuja,” A New Approach to monitor Condition of Transformers incipient fault diagonosis based on GSM and XBEE,” International Journal of Science, Engineering and Technology Research (IJSTER), Vol.4(11).pp.3826-3829,2015.
  16. Mohamed Ahmed Eltayeb Elmustafa Hayati, Sherif F.Babiker, “Design and Implementation of Low-Cost SMS Based Monitoring System of Distribution Transformers,” 2016 Conference of Basic Science and Engineering Studies (SGCAC).

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2020-06-30

Issue

Volume 7, Issue 3, May-June-2020

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Jeevak S. Lokhande, Dr. P. M. Daigavhane, Dr. Mithu Sarkar "Design of Smart Battery Management System for Electric Vehicle" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 3, pp.240-245, May-June-2020.