Review on Thermal Buckling of Symmetric Cross-Ply Laminated Plate

Authors

  • Balram Yadav  PG Scholar, Department of Mechanical Engineering, sagar institute of technology and management barabanki, Uttar Pradesh, India
  • Dr. Simant  Director at S.I.T.M B.B. K, Department of Mechanical Engineering, sagar institute of technology and management barabanki, Uttar Pradesh, India
  • Shivendra Kumar Yadav  Assistant Professor, Department of Mechanical Engineering, sagar institute of technology and management barabanki, Uttar Pradesh, India

DOI:

https://doi.org//10.32628/IJSRSET207436

Keywords:

Thermal Buckling of Symmetric Cross-Ply Laminated Plate

Abstract

In the present work thermal buckling of symmetric cross-ply composite laminates is investigated. In this study, a square plate element is employed for the thermal buckling analysis of composite laminated plates. The maximum buckling temperature of symmetric cross-ply laminates under various sides to thickness ratios, aspect ratios, stacking sequence and boundary condition are studied in detail. The maximum buckling temperature analysis of square composite eight and four layered plates under uniform temperature rise is investigated using the classical laminated plate theory & first order shear deformation theory and material properties (Stiffnesses, Poisson’s ratio and Coefficient of thermal expansion) are considered to be temperature dependent. The classical laminated plate theory and first order shear deformation theory in conjunction with the Rayleigh-Ritz method is used for the evaluation of the thermal buckling parameters of structures made out of graphite fibers with an epoxy matrix. The post-buckling response of symmetrically cross-ply laminated composite plates subjected to a combination of uniform temperature distribution through the thickness and in-plane compressive edge loading is presented. The maximum buckling temperature is obtained from the solution. The computing is done by using MATLAB.

References

  1. Jones, R.M., 1975, Mechanics of Composite Materials, McGraw-Hill.
  2. Reddy, J.N., 2004. Mechanics of Laminated Composite Plates & Shells, Theory & Analysis, CRC Press.
  3. Timoshenko, S.P. and Gere, J.M., 1961. Theory of Elastic Stability, McGraw-Hill.
  4. Mannini, A., 1997. Shear deformation effects on thermal buckling of cross-ply composite laminates,Journal ofComposite Structures, vol.39( l-2), pp. l-10.
  5. Kapania, R. K. and Raciti, S., 1989. Recent advances in analysis of laminated beams and plates, part I: shear effects and buckling.Journal of American institute of Aeronautics and Astronautics, vol. 27(7), pp. 923-934.
  6. Chen, L.W., and Chen, L.Y., 1987. Thermal buckling of laminated cylindrical platesJournal ofComposite Structures, vol. 8, pp.189-205.
  7. MetinAydogdu, 2007. Thermal buckling analysis of cross-ply laminated composite beams with general boundary conditions, Composites Science and Technology vol.67,pp.1096–1104.
  8. Tauchert, T.R., 1987. Thermal buckling of antisymmetric angle-ply laminates. Journal of Thermal Stresses, vol.10, pp. 113–24.
  9. Maloy, Singla, K., Ramachandra, L.S., Bandyopadhyay J.N., 2001. Thermal post buckling analysis of laminated composite plates. Journal of Composite Structures, vol. 54, pp.453–458.
  10. Meyers, C.A. &Hyer, M.W., 1991. Thermal buckling and postbuckling of symmetrically laminated composite plates. Journal of Thermal Stresses, vol.14(4), pp.519–540.
  11. Shiau, L.C., Kuo S.Y. and Chen, C.Y., 2010. Thermal buckling behavior of composite laminated plates, Journal ofComposite Structures, vol.92, pp.508–514.
  12. Ge, Y., Yuan, W. and Dawe, D.J., 2005. Thermomechanicalpostbuckling of composite laminated plates by the spline ?nite strip method, Journal ofComposite Structures, vol.71, pp.115–129.
  13. Shariyat, M., 2007. Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory, Thin-Walled Structures, vol.45, pp.439–452.
  14. Matsunaga, H., 2005. Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory, Journal ofComposite Structures, vol.68, pp.439–454.
  15. Nath, Y. and Shukla, K. K., 2001. Post-bucking of angle-ply laminated plates under thermal loading, Communications in Nonlinear Science & Numerical Simulation, vol.6, pp. 1-10.
  16. Ganapathi, M. and Touratier, M., 1997. A study on thermal postbuckling behaviour of laminated composite plates using a shear-flexible finite element , Finite Elements in Analysis and Design, vol.28, pp. 115-135.
  17. Girish, J. and Ramachandra, L.S., 2005. Thermomechanicalpostbuckling analysis of symmetric and antisymmetric composite plates with imperfections, Journal ofComposite Structures, vol.67, pp.453–460.
  18. Rao, K.M., 1985. Buckling analysis of anisotropic sandwich plates faced with fiber-reinforced plasticsJournal of American institute of Aeronautics and Astronautics, vol. 23(g), pp.1247-1253.
  19. Sun, L.X. and Hsu, T.R., 1990. Thermal buckling of laminated composite plates with transverse shear deformation. Journal ofComposite Structures, vol.36(5), pp.883-889.
  20. Lan, T., Lin, P.D. and Chen, L.W., 1993. Thermal buckling of bimodular sandwich beams. Journal ofComposite Structures, vol.25, pp.345-352.
  21. Papazoglou, V.J., Tsouvalis, N.G. andKyriakopulos, G.D., 1992. Buckling of unsymmetric laminates under linearly varying, biaxial in-plane loads, combined with shear. Journal ofComposite Structures, vol.20, pp.155-163.
  22. Mathew, T.C., Singh, G. and Rao, G.V., 1992. Thermal buckling of cross-ply composite laminates. Journal ofComposite Structures, vol.42(2), pp.281-287.
  23. Abramovich H., 1994. Thermal buckling of cross-ply composite laminates using first-order shear deformation theory, Journal ofComposite Structures, vol.28, pp.201-213.
  24. Tauchert, T.R., 1991. Thermally induced ?exure, buckling and vibration of plates. Applied Mechanics Review,vol.44, pp.347–360.
  25. Chang, J.S., 1992. A further study on thermal buckling simply supported antisymmetric angle-ply laminates in a uniform-temperature ?eld. Composite Science Technology, vol.43, pp.309-315.
  26. Lee J., 1997, Thermally induced buckling of laminated composites by a layerwise theory. Journal ofComposite Structures, vol.65(6), pp.917–922.
  27. Chandrupatla, T.R. and Belegundu, A.D., 2009. Introduction to Finite Elements in Engineering, PHI.
  28. Khdeir, A.A., 2001, Thermal buckling of cross-ply laminated composite beams. ActaMech,vol.149, pp.201–213.
  29. Javaheri, R., Eslami, M.R., 2002. Thermal buckling of functionally graded plates. Journal of American institute of Aeronautics and Astronautics, vol.40 (1), pp. 162–169.

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2020-01-30

Issue

Volume 7, Issue 1, January-February-2020

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Balram Yadav, Dr. Simant, Shivendra Kumar Yadav, " Review on Thermal Buckling of Symmetric Cross-Ply Laminated Plate, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 1, pp.327-333, January-February-2020. Available at doi : https://doi.org/10.32628/IJSRSET207436