Effect of Ink Tack Value on the Ink Trapping in Lithographic Printing

Authors

  • Duong Hong Quyen  Hanoi University of science and technology, Hanoi, Vietnam
  • Hoang Thi Kieu Nguyen  Hanoi University of science and technology, Hanoi, Vietnam

DOI:

https://doi.org//10.32628/IJSRSET2293180

Keywords:

Lithographic printing; ink tack; ink trapping; ink sequence

Abstract

This study investigated the effect of ink tack value on the ink transfer process in lithographic printing. The ink trapping is estimated optically with the use of densities. The ink trapping alters as a function of ink tack difference between the lower and upper ink. For the set of process colour inks that the tack difference between them is lower than 1 point, the ink trapping increases as the higher tack ink overprints lower tack ones. The proper ink sequence for the investigated system is M-C-Y.

References

  1. Robert Chung and Fred Hsu. Test Targets, Rochester Institute of technology, 2008
  2. S. D. Warren company, Wet ink trapping, Bulletin 4, 1998
  3. Abd El Rahman Ragab, International Design Journal, 2020, 1 (1), ISSN 2090-9632
  4. Vikas Solanki, Ambrish Pandey, Anil Kundu, International Journal of Engineering and Technical Research (IJETR), 2014, 2(4), ISSN: 2321-0869
  5. Bernd Th. Grande, Ink trapping in offset printing, 2012

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2022-06-30

Issue

Volume 9, Issue 3, May-June-2022

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Duong Hong Quyen, Hoang Thi Kieu Nguyen, " Effect of Ink Tack Value on the Ink Trapping in Lithographic Printing , International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 9, Issue 3, pp.561-564, May-June-2022. Available at doi : https://doi.org/10.32628/IJSRSET2293180