Fabrication of Pneumatic Punching and Bending Machine Powered by Solar Panel

Authors

  • K Mariyappan   Department of Mechanical Engineering, Vel Tech High Tech Engineering College, Chennai, Tamil Nadu, India
  • Santhosh V   Department of Mechanical Engineering, Vel Tech High Tech Engineering College, Chennai, Tamil Nadu, India
  • Abinav Krishna A   Department of Mechanical Engineering, Vel Tech High Tech Engineering College, Chennai, Tamil Nadu, India
  • MD Fyazuddin S   Department of Mechanical Engineering, Vel Tech High Tech Engineering College, Chennai, Tamil Nadu, India

DOI:

https://doi.org/10.32628/IJSRSET2310140

Keywords:

Pneumatics, Solar, Punching, V bend

Abstract

The sheet metal is majorly used in automobile and medical platforms. These are used in several places mainly, in small scale industries because the cost of hydraulic machine is not affordable in small scale industries. It gives major advantage in cost reduction. Therefore, many small scale and medium scale industries involving in sheet metal operations, punching, and bending works. This process is done by using compressor so the pressurized air is used in the process. This concept is used in construction and mechanical industries. Small scale mechanical industries and others which change sheet metal into various shapes by many operations such as cutting, punching, bending, blanking, trimming etc. Using different machining as per our search there is no machine which has bending and punching machine. The main drawback of this process is which is not having continuous power supply so we have concluded to make a supporting machine which can do both bending & punching operations in a same machine by using solar energy in this method we can overcome the lack of continuous power supply.

References

  1. Aditya Polapragada, Sri Varsha, “Pneumatic Auto Feed Punching and Riveting Machine”, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 7, September – 2012, ISSN: 2278-0181.
  2. Vijaylaxmi.G. Biradar, SiddharamPatil, R M Lathe, “Automation of Sheet Bending Machine Using Electro Pneumatic Devices” International Journal of Scientific & Engineering Research Volume 3, Issue 9, September-2012 1 ISSN 2229-5518.
  3. Handbook of die design, Second Edition, 2006, McGraw-Hill Handbooks, Ivana Suchy.
  4. Materials Handbook, Fifteenth Edition, 2008, Mc-Graw-Hill Handbooks, George.S. Brady, Henry.R. Clauser.
  5. P.M.Pradhan, “Experimental Investigation and Fabrication of Pneumatic Punch”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 6, June 2013.
  6. A.S. Aditya Polapragada& K. Sri Varsha, “Pneumatic Auto Feed Punching and Riveting Machine “, International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 7, September - 2012 ISSN: 2278 - 0181.
  7. U.P. Singh, “Design Study of the Geometry of a Punching tool”, Journal of Materials Processing Technology, 33 (1992) 331-345 Elsevier.
  8. A.D.Zope. (2017). Review paper on design and development of metal bending machine. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ,
  9. Goto, H. (2008). Applications with a New 6-DOF Bending Machine in Tube Forming Processes. Proceedings of the 7th JFPS International Symposium on Fluid Power, 7
  10. Hea, Y. (2012). Advances and Trends on Tube Bending Forming Technologies. Chinese Journal of Aeronautics, 1-12.
  11. Hussain, H. A. (2014). Design and Development of Bicycle Integrated Pipe Bending Machine. Journal of Mechanical and Civil Engineering (IOSRJMCE), 6.
  12. Jayakumar, A. (2019). Design and Fabrication of Roll Bending Machine. ISSN-2349- 5162, 3.
  13. Khandare, P. P. (2016). Study of Portable 3-Roller Pipe Bending. International Journal of Advanced Technology in Engineering and Science, 4.
  14. Pachange, R. (2019). Design And Fabrication Of Manual Roller Bending Machine. International Research Journal of Engineering and Technology (IRJET), 7.
  15. Jong GyeShin:-In their paper he has done the experiment on MechanicsBased Determination of the Center Roller Displacement in Three-Roll Bending for Smoothly Curved Rectangular Plates. The objective of this paper is to develop a logical procedure to determine the center roller displacement, in the three-roll bending process, which is required in the fabrication of curved rectangular plates with a desired curvature.
  16. M K Chudasama:-In their paper he has done the experiment on Analytical Model for Prediction of Force during 3-RollerMulti-pass Conica Bending. In thispaper, the total deflection of the top roller required is divided in steps to get the multi pass bending
  17. M. B. Bassett, and W. Johnson :-In their paper, The bending of plate using a three roll pyramid type plate bending machine, J. strain Analysis Process manual, maintenance manual, machine capacity chart and technical specification of rolling machine, M/s Larsen& Toubro ltd, Hazira, Surat, India
  18. Dr. C. C. Handaet. al :-This paper gives a review and Discussed about the productivity analysis of manually and power operated sheet bending machine considering time required to complete one pipe, total expenditure required to manufacture one pipe, number of operators and labors required during both operations, etc. Limitations of the manually operated sheet bending process over power operated sheet bending machine is also discussed.
  19. P.Goyal, 2015 - This project work deals with the design of pneumatically controlled small scale punching machine to carry out piercing operation on thin sheets (1-2 mm) of different material (aluminum and plastic).

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2023-02-28

Issue

Volume 10, Issue 1, January-February-2023

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
K Mariyappan, Santhosh V, Abinav Krishna A, MD Fyazuddin S "Fabrication of Pneumatic Punching and Bending Machine Powered by Solar Panel" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 10, Issue 1, pp.241-245, January-February-2023. Available at doi : https://doi.org/10.32628/IJSRSET2310140