ANN Controller Based Battery Charging System Inductive Power Transfer Topology

Authors

  • B. Chandra Singh  Assistant Professor, EEE Department, JB Institute of Engineering and Technology, Hyderabad, Telangana, India
  • M. Sai Kumar Reddy  B.Tech., EEE Department, JB Institute of Engineering and Technology, Hyderabad, Telangana, India
  • CH. Praveen Kumar  B.Tech., EEE Department, JB Institute of Engineering and Technology, Hyderabad, Telangana, India
  • G. Sai Ram Kumar  B.Tech., EEE Department, JB Institute of Engineering and Technology, Hyderabad, Telangana, India
  • P. Akash  B.Tech., EEE Department, JB Institute of Engineering and Technology, Hyderabad, Telangana, India

Keywords:

MATLAB, ZVZCS, IPT Topology, Zero Voltage Switching

Abstract

Recently available high-frequency power converter topologies for inductive power transfer (IPT) system utilize either zero voltage switching (ZVS) or zero current switching (ZCS) based power electronic converters while maintaining a near sinusoidal current for limited power transfer range. However, achieving ZVS or ZCS for all power switches simultaneously is still a challenging task in IPT systems. In this article, an improved zero-voltage zero-current switching (ZVZCS) IPT topology and its switching pattern are proposed. ZVS is achieved by optimizing the classical series compensation and additionally, an auxiliary network is employed to achieve ZCS. The proposed concept is verified by using MATLAB/Simulink based simulations for resistive and battery load. Finally, the practical viability of the proposed topology is validated by the results obtained using a laboratory prototype rated for 1.1 kW, 85 kHz. An efficiency of 91.26% is achieved with ZVZCS for a full dynamic power transfer range of 20 W–1.1 kW.

References

  1. M. Granovskii, I. Dincer, and M. A. Rosen, “Economic and environmental comparison of conventional, hybrid, electric and hydrogen fuel cell vehicles,” J. Power Sources, vol. 159, no. 2, pp. 1186–1193, 2006.
  2. S. B. Peterson, J. Whitacre, and J. Apt, “The economics of using plug-in hybrid electric vehicle battery packs for grid storage,” J. Power Sources, vol. 195, no. 8, pp. 2377–2384, 2010.
  3. Y. Zhou, M. Wang, H. Hao, L. Johnson, and H. Wang, “Plug-in electric vehicle market penetration and incentives: A global review,” Mitigation Adaptation Strategies Global Change, vol. 20, no. 5, pp. 777–795, 2015.
  4. B. Nykvist and M. Nilsson, “Rapidly falling costs of battery packs for electric vehicles,” Nature Climate Change, vol. 5, no. 4, pp. 329–332, 2015.
  5. W. Zhang and C. C. Mi, “Compensation topologies of high-power wireless power transfer systems,” IEEE Trans. Veh. Technol., vol. 65, no. 6, pp. 4768–4778, Jun. 2016.
  6. K. Mude and K. Aditya, “Comprehensive review and analysis of two-element resonant compensation topologies for wireless inductive power transfer systems,” Chin. J. Elect. Eng., vol. 5, no. 2, pp. 14–31, 2019.
  7.  Y. Jiang, L. Wang, Y. Wang, J. Liu, X. Li, and G. Ning, “Analysis, design, and implementation of accurate ZVS angle control for EV battery charging in wireless high-power transfer,” IEEE Trans. Ind. Electron., vol. 66, no. 5, pp. 4075–4085, May 2019.
  8. Y. Jiang, L. Wang, Y. Wang, J. Liu, M. Wu, and G. Ning, “Analysis, design, and implementation of WPT system for EV’s battery charging based on optimal operation frequency range,” IEEE Trans. Power Electron., vol. 34, no. 7, pp. 6890–6905, Jul. 2019.
  9. D. H. Tran, V. B. Vu, and W. Choi, “Design of a high-efficiency wireless power transfer system with intermediate coils for the on-board chargers of electric vehicles,” IEEE Trans. Power Electron., vol. 33, no. 1, pp. 175–187, Jan. 2018.
  10. S. Moon and G.-W. Moon, “Wireless power transfer system with an asymmetric four-coil resonator for electric vehicle battery chargers,” IEEE Trans. Power Electron., vol. 31, no. 10, pp. 6844–6854, Oct. 2016.
  11. O. C. Onar, M. Chinthavali, S. L. Campbell, L. E. Seiber, and C. P. White, “Vehicular integration of wireless power transfer systems and hardware interoperability case studies,” IEEE Trans. Ind. Appl., vol. 55, no. 5, pp. 5223–5234, Sep./Oct. 2019.
  12. S. Li, W. Li, J. Deng, T. D. Nguyen, and C. C. Mi, “A double-sided LCC compensation network and its tuning method for wireless power transfer,” IEEE Trans. Veh. Technol., vol. 64, no. 6, pp. 2261–2273, Jun. 2015.
  13. C. Liu, S. Ge, Y. Guo, H. Li, and G. Cai, “Double-LCL resonant compensation network for electric vehicles wireless power transfer: Experimental study and analysis,” IET Power Electron., vol. 9, no. 11, pp. 2262–2270, 2016.
  14. C. Xiao, D. Cheng, and K. Wei, “An LCC-C compensated wireless charging system for implantable cardiac pacemakers: Theory, experiment, and safety evaluation,” IEEE Trans. Power Electron., vol. 33, no. 6, pp. 4894–4905, Jun. 2018.
  15. Y. Chen, H. Zhang, S.-J. Park, and D.-H. Kim, “A switching hybrid LCC-S compensation topology for constant current/voltage EV wireless charging,” IEEE Access, vol. 7, pp. 133924–133935, 2019.
  16. Y. Zhang, Z. Yan, T. Kan, Y. Liu, and C. C. Mi, “Modelling and analysis of the distortion of strongly-coupled wireless power transfer systems with SS and LCC–LCC compensations,” IET Power Electron., vol. 12, no. 6, pp. 1321–1328, 2019.
  17. W. Li, H. Zhao, J. Deng, S. Li, and C. C. Mi, “Comparison study on SS and double-sided LCC compensation topologies for EV/PHEV wireless chargers,” IEEE Trans. Veh. Technol., vol. 65, no. 6, pp. 4429–4439, Jun. 2016.
  18. G. N. B. Yadav and N. L. Narasamma, “An active soft switched phaseshifted full-bridge dc–dc converter: Analysis, modeling, design, and implementation,” IEEE Trans. Power Electron., vol. 29, no. 9, pp. 4538–4550, Sep. 2014.
  19. M. Pahlevaninezhad, P. Das, J. Drobnik, P. K. Jain, and A. Bakhshai, “A novel ZVZCS full-bridge dc/dc converter used for electric vehicles,” IEEE Trans. Power Electron., vol. 27, no. 6, pp. 2752–2769, Jun. 2012.
  20. V. R. K. Kanamarlapudi, B.Wang, P. L. So, and Z.Wang, “Analysis, design, and implementation of an APWM ZVZCS full-bridge dc–dc converter for battery charging in electric vehicles,” IEEE Trans. Power Electron., vol. 32, no. 8, pp. 6145–6160, Aug. 2017.
  21. J. K. Nama, M. Srivastava, and A. K. Verma, “Modified inductive power transfer topology for electrical vehicle battery charging using auxiliary network to achieve zero-voltage switching for full load variations,” IET Power Electron., vol. 12, no. 10, pp. 2513–2522, 2019.
  22. M. Srivastava, P. S. Tomar, and A. K. Verma, “A modified duty cycle frequency control soft switching of full bridge dc-dc converter for electric vehicle battery charging,” in Proc. 8th IEEE India Int. Conf. Power Electron, 2018, pp. 1–5
  23. J. K. Nama, P. S. Tomar, M. Srivastava, and A. K. Verma, “An efficient wireless topology for electric vehicle battery charging,” in Proc. 8th IEEE India Int. Conf. Power Electron., 2018, pp. 1–6.
  24. Parashar Vidyut Udyog, Litz Wire—pdf catalogue, 2020. [Online].Available: https://pdf.indiamart.com/impdf/9435952930/MY-10389389/ litz-wire.pdf [
  25. Magnetics International, Kool Mµ Hf Powder Cores, 2020. [Online]Available:https://www.mag-inc.com/Media/Magnetics/File-Library/ Product%20Literature/Powder%20Core%20Literature/Magnetics-KoolM%c2%b5-H%c6%92-Bulletin.pdf
  26. Magnetics International, Ferrite Cores—Toroids | Shapes | Pot Cores, 2020. [Online]. Available: https://www.mag-inc.com/getattachment/ Products/Ferrite-Cores/Learn-More-about-Ferrite-Cores/MagneticsFerrite-Catalog-2017.pdf?lang=en-US Jitendra K 

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2023-04-30

Issue

Volume 10, Issue 2, March-April-2023

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
B. Chandra Singh, M. Sai Kumar Reddy, CH. Praveen Kumar, G. Sai Ram Kumar, P. Akash "ANN Controller Based Battery Charging System Inductive Power Transfer Topology" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 10, Issue 2, pp.62-67, March-April-2023.