Design And Implementation of Electric Vehicle Charger Using Hybrid Converter

Authors

  • B. Murugan  Professor, Department of Electrical and Electronics Engineering, RAAK College of Engineering & Technology, Puducherry, India
  • V. Muthukumaran  UG Scholar, Department of Electrical and Electronics Engineering, RAAK College of Engineering & Technology, Puducherry, India
  • M. Rakesh  UG Scholar, Department of Electrical and Electronics Engineering, RAAK College of Engineering & Technology, Puducherry, India
  • M. Dineshkar  UG Scholar, Department of Electrical and Electronics Engineering, RAAK College of Engineering & Technology, Puducherry, India

Keywords:

Hybrid Converter, LUO Converter

Abstract

Over the recent years, the growing need for the integration of electric vehicles into the grid has been seen. Electric vehicles can be easily integrated into the conventional grid through the advancement of various topologies of power semiconductor devices and the development of power electronic converters. The interface provides the maximum power point for the electric vehicles to operate. The Hybrid LUO converter (HLC) implemented in this project is one of the most popular topology for integration renewable energy resources and electric vehicle. This configuration of bidirectional DC-DC converter provides galvanic isolation through a high frequency transformer and also provides bidirectional power flow. The HLC converter control is based on the modulation of phase shift control where the leading bridge supplies power to the lagging bridge. The closed loop control of the converter is implemented in this project.

References

  1. M. Kheraluwala, R. W. Gascoigne, D. M. Divan, and E. D. Baumann, “Performance characterization of a high-power Hybrid LUO dc-to-converter,” Industry Applications, IEEE Transactions on, vol. 28, no. 6, pp.1294–1301, 1992.
  2. A.K. Jain and R. Ayyanar, “PWM control of Hybrid LUO: Comprehensive analysis and experimental veri?cation,” Power Electronics, IEEE Transactions on, vol. 26, no. 4, pp. 1215–1227, 2011.
  3. S. Inoue and H. Akagi, “A bi-directional dc/dc converter for an energy storage system,” in Applied Power Electronics Conference, APEC 2007-Twenty Second Annual IEEE. IEEE, 2007, pp. 761–767
  4. S. Han and D. Divan, “Bi-directional dc/dc converters for plug-in hybrid electric vehicle (phev) applications,” in Applied Power Electronics Conference and Exposition, 2008. APEC2008. Twenty-Third Annual IEEE. IEEE, 2008, pp. 784–789.
  5. F. Z. Peng, H. Li, G.-J. Su, and J. S. Lawler, “A new zvs bidirectional dc-dc converter for fuel cell and battery application,” Power Electronics, IEEE Transactions on, vol. 19, no. 1, pp. 54–65, 2004.
  6. C. MI, H. Bai, C. Wang, and S. Gargies, “Operation, design and control of dual h- bridge-based isolated bidirectional dc–dc converter,” IET Power Electronics, vol. 1, no. 4, pp. 507–517, 2008.
  7. H. Qin, “Hybrid LUO converters in solid state transformers,” 2012.
  8. Y. Xie, J. Sun, and J. S. Freudenberg, “Power ?ow characterization of a bidirectional alvanically isolated high-power dc/dc converter over a wide operating range,” Power Electronics, IEEE Transactions on, vol. 25, no. 1, pp. 54–66, 2010.
  9. F. Krismer, “Modelling and optimization of bidirectional Hybrid LUO dc-dc converter topologies,” Ph.D. dissertation, Diss., Eidgen¨ossischeTechnischeHochschule ETHZ¨urich,Nr.19177,2010,2010.
  10. A. R. Alonso, J. Sebastian, D. G. Lamar, M. M. Hernando, and A. Vazquez,“An overall study of a Hybrid LUO for bidirectional dc/dc conversion, “in Energy Conversion Congress and Exposition (ECCE), 2010 IEEE. IEEE,2010, pp. 1129–1135.s
  11. R. J. Wai and K. H. Jheng, “High-efficiency single-input multiple-output DC-DC converter,” IEEE Transactions on Power Electronics, vol. 28, no. 2, pp. 886–898, Feb. 2013
  12. D. Kwon and G. A. Rincon-Mora, “Single-inductor-multiple-output switching DC-DC converters,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 56, no. 8, pp. 614–618, Aug. 2009.
  13. P. Patra, A. Patra, and N. Misra, “A single-inductor multiple-output switcher with simultaneous buck, boost, and inverted outputs,” IEEE Transactions on Power Electronics, vol. 27, no. 4, pp. 1936–1951, Apr. 2012.
  14. G. P. Chen, Z. F. Jin, Y. Deng, X. N. He, and X. L. Qing, “Principle and topology synthesis of integrated single-input dual-output and dualinput single-output DC-DC converters,” IEEE Transactions on Industrial Electronics, vol. 65, no. 5, pp. 3815–3825, May 2018.
  15. A. Amir, A. Amir, H. S. Che, A. Elkhateb, and N. A. Rahim, “Comparative analysis of high voltage gain DC-DC converter topologies for photovoltaic systems,” Renewable Energy, vol. 136, pp. 1147–1163, Jun. 2019.
  16. R. R. Ahrabi, H. Ardi, M. Elmi, and A. Ajami, “A novel step-up multiinput DC-DC converter for hybrid electric vehicles application,” IEEE Transactions on Power Electronics, vol. 32, no. 5, pp. 3549–3561, May 2017.
  17. C. M. Lai, Y. H. Cheng, M. H. Hsieh, and Y. C. Lin, “Development of a bidirectional DC/DC converter with dual-battery energy storage for hybrid electric vehicle system,” IEEE Transactions on Vehicular Technology, vol. 67, no. 2, pp. 1036–1052, Feb. 2018.
  18. G. D. Zhang, B. Zhang, Z. Li, Y. Zhang, and S. Z. Chen, “A novel single-input dual-output impedance network converter,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, no. 3, pp. 1133–1141, Sep. 2017.
  19. F. Musavi, M. Craciun, D. S. Gautam, W. Eberle, and W. G. Dunford, “An LLC resonant DC-DC converter for wide output voltage range battery charging applications,” IEEE Transactions on Power Electronics, vol. 28, no. 12, pp. 5437–5445, Dec. 2013.
  20. F. L. Luo and H. Ye, Essential DC/DC Converters, Boca Raton, FL: CRC Press, 2006

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2023-04-30

Issue

Volume 10, Issue 2, March-April-2023

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
B. Murugan, V. Muthukumaran, M. Rakesh, M. Dineshkar "Design And Implementation of Electric Vehicle Charger Using Hybrid Converter" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 10, Issue 2, pp.652-660, March-April-2023.