PLC Based Automatic Control of Hydraulic Press Machine Using LVDT

Authors

  • Dr. D. Raja  Professor, Department of Electrical and Electronics Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India
  • V. Deepika  UG Scholar, Department of Electrical and Electronics Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India
  • R. Nivethitha  
  • A. Hemalatha  
  • A. Arthi  

Keywords:

Pressing, Cycle time, Press machine, Automation.

Abstract

Now a days most of the industries are moving towards automation which reduces the manpower and processing time. The automation technique which carries out the automatic process of hydraulic pressing machine using PLC is implemented in this project. The existing Pressing machine is manually operated by the operator and the cycle time of this machine is 6sec and the output is 600 products per hour. The Limit switch is used to control the upward and downward movement of the solenoid in the hydraulic machine. In this project, cylinder and press table are designed by the designing procedure. They are analyzed to improve their performance and quality of working operation. Using PLC, it can be very easy to meet the process requirements, such as to improve the system stability, reliability, security, and automation level. The outcome of this machine is to reduce the cycle time from 6sec to 4 sec and the output is increased from 600 to 900 products per hour. By designing this machine, better joint strength is provided and it improves the quality and productivity by minimizing the cycle time.

References

  1. RaQ. Liu, X. Li, and X. Meng, "Effectiveness research on the multiplayer evolutionary game of coal-mine safety regulation in China based on system dynamics," Saf. Sci., vol. 111, pp. 224_233, Jan. 2019, doi: 10.1016/j.ssci.2018.07.014.
  2. Q. Liu, X. Meng, M. Hassall, and X. Li, "Accident-causing mechanism in coal mines based on hazards and polarized management," Saf. Sci., vol. 85, pp. 276_281, Jun. 2016, doi: 10.1016/j.ssci.2016.01.012.
  3. S. Han, H. Chen, R. Long, H. Qi, and X. Cui, "Evaluation of the derivative environment in coal mine safety production systems: Case study in China," J. Cleaner Prod., vol. 143, pp. 377_387, Feb. 2017, doi: 10.1016/j.jclepro.2016.12.096.
  4. Y. Shi, J. Chen, J. Hao, J. Bi, M. Qi, and X. Wang, "Statistical analysis of coal mine accidents of China in 2018," in Proc. IEEE Prognos- tics Syst. Health Manage. Conf. (PHM), Oct. 2019, doi: 10.1109/PHMQingdao46334.2019.894299
  5. Zhao, J. Gao, F. Zhao, and Y. Liu, "A search-and-rescue robot system for remotely sensing the underground coal mine environment," Sensors, vol. 17, no. 10, p. 2426, Oct. 2017, doi: 10.3390/s17102426.
  6. J. Zhang, J. Fu, H. Hao, G. Fu, F. Nie, and W. Zhang, "Root causes of coal mine accidents: Characteristics of safety culture de_ciencies based on accident statistics," Process Saf. Environ. Protection, vol. 136, pp. 78_91 Apr. 2020, doi: 10.1016/j.psep.2020.01.024.
  7. A. H. Reddy, B. Kalyan, and C. S. N. Murthy, "Mine rescue robot system_ A review," Procedia Earth Planet. Sci., vol. 11, pp. 457_462, Jan. 2015, doi: 10.1016/j.proeps.2015.06.045.
  8. W. Shang, X. Cao, H. Ma, H. Zang, and P. Wei, "Kinect-based vision system of mine rescue robot for low illuminous environment," J. Sensors, vol. 2016, pp. 1_9, Oct. 2016, doi: 10.1155/2016/8252015.
  9. Y. Wang, P. Tian, Y. Zhou, and Q. Chen, "The encountered problems and solutions in the development of coal mine rescue robot," J. Robot., vol. 2018, pp. 1_11, Oct. 2018, doi: 10.1155/2018/8471503.
  10. Y. Wang, Y. W. Li, P. Tian, and Y. Zhou, "Analysis and prospect on development course of colliery rescue robots," Mining Process. Equip., vol. 46, no. 05, pp. 1_10, 2018, doi: 10.16816/j.cnki.ksjx.2018.05.001.
  11. K. Hashimoto, "A review on vision-based control of robot manipulators," Adv. Robot., Int. J. Robot. Soc. Jpn., vol. 17, no. 10, pp. 969_991, 2003.
  12. L. Perez, I. Rodriguez, N. Rodriguez, R. Usamentiaga, and D. F. Garcia, "Robot guidance using machine vision techniques in industrial environments: A comparative review," Sensors, vol. 16, no. 3, p. 26, Mar. 2016, doi: 10.3390/s16030335.
  13. D. Marr and T. Poggio, "Cooperative computation of stereo disparity," Science, vol. 194, no. 4262, pp. 283_287, Oct. 1976, doi: 10.1126/science. 968482.
  14. W. E. Grimson, "A computer implementation of a theory of human stereo vision," Phil. Trans. Roy. Soc. London. Ser. B, Biol. Sci., vol. 292, no. 1058, pp. 217_253, May 1981, doi: 10.1098/rstb.1981.0031.
  15. J. Hofmann, J. Korinth, and A. Koch, "A scalable high-performance hardware architecture for real-time stereo vision by semi-global matching," in Proc. IEEE Conf. Comput. Vis. Pattern Recognit. Workshops (CVPRW), Jun. 2016, pp. 845_853, doi: 10.1109/CVPRW.2016.110.
  16. S. Yang, Y. Gao, Z. Liu, and G. Zhang, "A calibration method for binocular stereo vision sensor with short-baseline based on 3D _exible control _eld," Opt. Lasers Eng., vol. 124, Jan. 2020, Art. no. 105817, doi: 10.1016/j.optlaseng.2019.105817. [18] S. Zhang, B. Li, F. Ren, and R. Dong, "High-precision measurement of binocular telecentric vision system with novel calibration and matching methods," IEEE Access, vol. 7, pp. 54682_54692, 2019, doi: 10.1109/access.2019.2913181.
  17. H. S. Yin, "SLAM-based self-calibration of a binocular stereo vision rig in real-time," Sensors, vol. 20, no. 3, p. 21, Feb. 2020, doi: 10.3390/s20030621.
  18. S. Song and W. Zhang, "LTF robot: Binocular robot with laser-point tracking and focusing function," in Proc. Int. Conf. Intell. Robot. Appl., vol. 11740, 2019, pp. 39_48, doi: 10.1007/978-3-030-27526-6_4.
  19. M. Samadi, M. F. Othman, and S. H. M. Amin, Stereo vision based robots: Fast and robust obstacle detection

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2023-04-30

Issue

Volume 10, Issue 2, March-April-2023

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Dr. D. Raja, V. Deepika, R. Nivethitha, A. Hemalatha, A. Arthi "PLC Based Automatic Control of Hydraulic Press Machine Using LVDT" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 10, Issue 2, pp.363-368, March-April-2023.