Systematically Assess the Mechanical and Thermal Properties of Nano-Sio2 Epoxy Coir Fiber Reinforced Composites
DOI:
https://doi.org/10.32628/IJSRSET2512510Abstract
Composite fabrications that have been successful by hand lay-up technique. Find helpful features such as faster processing time and reduced manufacturing costs. Comparative research that demonstrates the benefits of improved composition details and commercial applicability. Examine and assess the mechanical properties of a Coir fabric composite reinforced with epoxy and nano-SiO2, including tensile, impact, wear, moisture absorption, and thermogravimetric analysis (TGA) properties. Test findings for coir composites and nano-SiO2 addition are contrasted with those of other composites. Every test is conducted using the ASTM standard. When compared to other composite material compositions, it was discovered that the inclusion of 3 weight percent nano-SiO2 powder as filler and coir fabric reinforced with epoxy composite had a substantial influence on mechanical and thermal characteristics and provided extremely good results. If the proportion of filler nano-SiO2 on the composite material is more than 3 weight percent, the material becomes brittle and difficult to produce. An epoxy composite bonded with coir cloth has better mechanical and thermal qualities. It has also been shown that the composite material is affected by varying weight ratios of nano-SiO2 powder filler content.
📊 Article Downloads
References
Abdi, A., Farsani, R. E., and Khosravi, H. (2018). An investigation into the mechanical characteristics of epoxy-based composites reinforced with basalt fibers and enhanced with surface-treated calcium carbonate (CaCO₃) nanoparticles. Fibres and Polymers, 19, 635–640. DOI: https://doi.org/10.1007/s12221-018-7755-x
Ahmed, K. S., and Vijayarangan, S. (2007). Experimental analysis of isothalic polyester composites reinforced with woven coir fabric. Journal of Applied Polymer Science, 104, 2650–2662. DOI: https://doi.org/10.1002/app.25652
Ahmed, K. S., Mallinatha, V., and Amith, S. J. (2011). Influence of ceramic particulate fillers on the mechanical behavior of epoxy composites reinforced with woven coir fabric. Journal of Reinforced Plastics and Composites, 30, 1315–1326. DOI: https://doi.org/10.1177/0731684411420606
Ahmed, K. S., Khalid, S. S., Mallinatha, V., and Kumar, S. A. (2012). Investigation of dry sliding wear characteristics in coir/epoxy composites infused with SiC and Al₂O₃ ceramic fillers. Materials and Design, 36, 306–315. DOI: https://doi.org/10.1016/j.matdes.2011.11.010
Al-Mosawi, A. I., Al-Maamori, M. H., and Wetwet, Z. A. (2012). Mechanical performance evaluation of composites reinforced with a hybrid combination of natural and synthetic fibers. Academic Research International, 3, 108–112.
Alshammari, B. A., Saba, N., Alotaibi, M. D., Alotibi, M. F., Jawaid, M., and Alothman, O. Y. (2019). Assessment of the mechanical, physical, and structural characteristics of epoxy-based composites incorporating various date palm fillers. Materials, 12, 1–17. DOI: https://doi.org/10.3390/ma12132145
An, L., Zhang, D., Zhang, L., and Feng, G. (2019). Influence of particle size on the mechanical behavior of assembled nanoparticle structures. Nanoscale, 11, 9563–9573. DOI: https://doi.org/10.1039/C9NR01082C
Anaidhuno, U. P., Edelugo, S. O., and Nwobi-Okoye, C. C. (2017). Analysis of mechanical behavior and failure simulation of a sisal/coir hybrid polymer composite used in automotive chassis panels. Evaluation, 7, 56–64.
Manral, A., and Bajpai, P. K. (2018). IOP Conference Series: Materials Science and Engineering, 455, 012115. DOI: https://doi.org/10.1088/1757-899X/455/1/012115
Balakrishnan, S., Krishnaraj, C., and Raajeshkrishna, C. R. (2019). Mechanical evaluation of epoxy composites reinforced with carbon, coir fabric, and a hybrid of pineapple and watermelon peel nanoparticles. Materials Research Express, 6, 1–9. DOI: https://doi.org/10.1088/2053-1591/ab403f
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., and Tadimeti, J. G. D. (2019). Processing techniques and future potential of natural fiber-reinforced polymer composites in additive manufacturing. Composites Part B: Engineering, 174, 1–29. DOI: https://doi.org/10.1016/j.compositesb.2019.106956
Dinesh, U., Vijayaprabu, S., and Kazi, A. (2016). Evaluation of the properties of epoxy composites enhanced with multi-walled carbon nanotube reinforcements. International Journal of Latest Technology in Engineering, Management and Applied Science, 5, 64–71.
Elbadry, E. A., Aly-Hassan, M. S., and Hamada, H. (2012). Investigation of mechanical characteristics of hybrid polymer composites reinforced with coir fabric and coir mat fibers. Advances in Mechanical Engineering, 4, 1–12. DOI: https://doi.org/10.1155/2012/354547
Gajera, B., and Panwar, N. L. (2019). Thermogravimetric analysis-based study on the pyrolysis and reaction kinetics of black gram straw. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1, 1–14.
Gowda, T. M., Naidu, A. C. B., and Chaya, R. (1999). Evaluation of certain mechanical properties of polyester composites reinforced with untreated coir fabric. Composites Part A: Applied Science and Manufacturing, 30, 277–284. DOI: https://doi.org/10.1016/S1359-835X(98)00157-2
Guo, D., Xie, G., and Luo, J. (2013). Fundamentals and applications of the mechanical behavior of nanoparticles. Journal of Physics D: Applied Physics, 47, 1–25. DOI: https://doi.org/10.1088/0022-3727/47/1/013001
Gupta, M. K., Srivastava, R. K., and Bisaria, H. (2015). A comprehensive review on the potential of polymer composites reinforced with coir fiber. International Journal of Fibre and Textile Research, 5, 30–38.
Gupta, M. K., Srivastava, R. K., Kumar, S., Gupta, S., and Nahak, B. (2015). Study of mechanical strength and water absorption behavior in epoxy composites reinforced with hybrid sisal and glass fibers. American Journal of Polymer Science and Engineering, 3, 208–219.
Gwon, J. G., Lee, S. Y., Chun, S. J., Doh, G. H., and Kim, J. H. (2010). Influence of chemical modification of hybrid fillers on the thermal and physical performance of wood–plastic composites. Composites Part A: Applied Science and Manufacturing, 41, 1491–1497. DOI: https://doi.org/10.1016/j.compositesa.2010.06.011
Jawaid, M., Khalil, H. A., and Bakar, A. A. (2010). Mechanical characterization of hybrid epoxy composites reinforced with coir and oil palm empty fruit bunch fibers. Materials Science and Engineering: A, 527, 7944–7949. DOI: https://doi.org/10.1016/j.msea.2010.09.005
Jerome, P. O. R. A. (2001). Evolution and future of composite materials in Airbus A380. In Proceedings of the 13th International Conference on Composite Materials (Vol. 13, pp. 1–10). Beijing.
Joseph, O. O., and Babaremu, K. O. (2019). A review on the use of agricultural residues as reinforcement particles in aluminum metal matrix composites (AMMCs). Fibres, 7, 1–9. DOI: https://doi.org/10.3390/fib7040033
Joshi, S., Drzal, L., Mohanty, A., and Arora, S. (2004). Do natural fiber composites offer environmental advantages over glass fiber-reinforced alternatives? Composites Part A: Applied Science and Manufacturing, 35, 371–376. DOI: https://doi.org/10.1016/j.compositesa.2003.09.016
Kerni, L., Singh, S., Patnaik, A., and Kumar, N. (2020). A comprehensive review on composites reinforced with natural fibers. Materials Today: Proceedings, 28, 1616–1621. DOI: https://doi.org/10.1016/j.matpr.2020.04.851
Masoodi, R., and Pillai, K. M. (2012). Investigation of moisture uptake and dimensional changes in coir–epoxy bio-composites. Journal of Reinforced Plastics and Composites, 31, 285–294. DOI: https://doi.org/10.1177/0731684411434654
Mathur, V. K. (2006). Development of composite materials utilizing locally available resources. Construction and Building Materials, 20, 470–477. DOI: https://doi.org/10.1016/j.conbuildmat.2005.01.031
Mercy, J. L., Parmar, D. S., and Srivastava, S. (2020). Analysis of frictional and thermal decomposition characteristics of epoxy composites reinforced with pineapple fibers. IOP Conference Series: Materials Science and Engineering, 923, 12–24. DOI: https://doi.org/10.1088/1757-899X/923/1/012024
Downloads
Published
Issue
Section
License
Copyright (c) 2025 International Journal of Scientific Research in Science, Engineering and Technology

This work is licensed under a Creative Commons Attribution 4.0 International License.