Comparative Study on Adaptive Displacement Based Pushover Analysis

Authors

  • Shahrukh Khan Pathan  Shahrukh Khan Pathan, Saket Sorathiya, Adil Haji
  • Saket Sorathiya  Shahrukh Khan Pathan, Saket Sorathiya, Adil Haji
  • Adil Haji  Shahrukh Khan Pathan, Saket Sorathiya, Adil Haji

Keywords:

Pushover analysis, displacement based, Adaptive pushover.

Abstract

Current trend in the estimation of seismic demand for reinforced concrete structure has been widely been based on forced based analysis. Adaptive Pushover method is advancement in the convention methods. Forced based scaling in adaptive pushover (FAP) analysis involves forced based controlling parameters. The force vector for pushover is incremented with every step of analysis, rather than Modal Pushover analysis which has the force vector based on the modal shapes until 90% modal participation factor is attained. Displacement based adaptive pushover analysis shows relatively appealing concept. In the present paper 8 storey MR frame is studied and comparison is done among force based adaptive pushover, displacement based adaptive pushover and non-linear time history analysis considering NTH analysis to be exact.

References

  1. Chopra, A. K. and Goel, R. K. [2002] “A modal pushover analysis procedure for estimating seismic demands for buildings," Earthquake Engineering and Structural Dynamics 31,561-582
  2. S. Jingjiang, Tetsuro O, Zhao Y.,and Wang W,” Lateral load pattern in pushover analysis” Earthquake Engineering And Engineering Vibration Vol.2 No.1, June 2003.
  3. Kazem Shakeri , Mohsen A. Shayanfar, Toshimi Kabeyasawa, “A story shear-based adaptive pushover procedure for estimating seismic demands of buildings” Engineering Structures Volume 32, Issue 1, January 2010, Pages 174–183.
  4. Mohammed H. Serror, Nayer A. El-Esnawy, and Rania F. Abo-Dagher “Effect of Pushover Load Pattern on Seismic Responses of RC Frame Buildings”, Journal of American Science 2012; 8(2): 438-447.
  5. Javadein S. I. & Taghinezhad R. “Evaluation of lateral load pattern in pushover analysis”, Earthquake Resistant Engineering Structures VI, WIT Transactions on The Built Environment, Vol 93.
  6. Masoumeh G., Mohammad M. A. “Considerations on the Pushover Analysis of Multi-Story Steel Plate Shear Wall Structures”, Periodica Polytechnica Civil Engineering 60(1), pp. 113–126, 2016.
  7. Sadegh E., Mohammad A. I. “A proposed lateral load pattern for pushover analysis of structures subjected to earthquake Excitations”, Journalof  Vibroengineering,  May 2015, Volume 17, Issue 3.
  8. H. Gholi Pour, M. Ansari and M. Bayat ”A  new lateral load pattern or pushover analysis in structures. “ Earthquakes and Structures, Vol. 6 No. 4, 2014.
  9. S. Antoniou, A. Rovithakis, R. Pinho” Development And Verification Of A Fully Adaptive Pushover Procedure” , 12th European Conference on Earthquake Engineering Paper Reference 822.
  10. Syed Ahamed, Dr. Jagadish.G.Kori “Performance Based Seismic Analysis Of An Unsymmetrical Building Using Pushover Analysis” Ijer-V0l 2 2013.
  11. Onur Merter, Taner Ucar, “A Comparative Study on Nonlinear Static and Dynamic Analysis of RC Frame Structures “Journal of Civil Engineering and Science SEPT 2013
  12. S. Antoniou, R. Pinho “Development And Verification Of A Displacement-Based Adaptive Pushover Procedure” Journal of Earthquake Engineering, Vol. 8, No. 5 (2004) 643-661.
  13. S. Antoniou, R. Pinho “Advantages And Limitations Of Adaptive And Non-Adaptive Force-Based Pushover Procedures” Journal of Earthquake Engineering, Vol. 8, No. 4 (2004) 497-522.
  14. Kavita Golghate, Vijay Baradiya, Amit Sharma” Pushover Analysis of 4 Storey’s Reinforced Concrete Building” International Journal of Latest Trends in Engineering and Technology
  15. Navid Siahpolo, Mohsen Gerami, Reza Vahdani“Inelastic deformation demands of regular steel frames subjected to pulse-like near-fault ground shakings” Int J Adv Struct Eng (2016) 8:281–296.
  16. ATC 40, “Seismic evaluation and retrofit of concrete buildings” (Volume 1). Report No. SSC 96-01. Redwood City (CA): Applied Technology Council; 1996.
  17. FEMA 356, “NEHRP Pre standard and commentary for the seismic rehabilitation of buildings” (2000).
  18. BIS IS 1893: Criteria for earthquake resistant design of structures, Part 1. New Delhi (India): Bureau of Indian Standards; 2002.
  19.  BIS IS 456: Plain and reinforced concrete-code of practice. New Delhi (India) Bureau of Indian Standards; 2000.

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2018-04-10

Issue

Volume 4, Issue 5, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Shahrukh Khan Pathan, Saket Sorathiya, Adil Haji, " Comparative Study on Adaptive Displacement Based Pushover Analysis, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 5, pp.137-141, March-April-2018.