Design & Manufacturing of Reduction Box

Authors

  • Heel Patel  UG Student, B.E. Mechanical Engineering, ITM Universe, Vadodara, Gujarat, India
  • Dhruv Wadhwa  UG Student, B.E. Mechanical Engineering, ITM Universe, Vadodara, Gujarat, India
  • Harsh Patel  UG Student, B.E. Mechanical Engineering, ITM Universe, Vadodara, Gujarat, India
  • Parth Trivedi  UG Student, B.E. Mechanical Engineering, ITM Universe, Vadodara, Gujarat, India
  • Jay Mandalia  Assistant Professor, Department of Automobile Engineering, ITM Universe, Vadodara, Gujarat, India

Keywords:

Reduction Box, Bending stress, Contact stress, Gearbox design, Assembly Analysis, Spur gear, Gear Design.

Abstract

A gear is a rotating machine part having a cut tooth, which meshes with another toothed part in order to transmit torque. Gears are mainly typed like spur gears, helical gears, double helical gears, bevel gears, crown gears, hypoid gears, worm gears, rack and pinion, epi cyclic gears etc. There is a great need for efficient and compact gear boxes in automotive and industrial applications to improve upon their power density while reducing their dynamic vibration and noise deliveries. The less efficiency of gear box of a machine tool is a serious problem as it increases maintenance cost and affects the reputation of a firm. Whenever a frequent change in speed/torque at the output is required, we use multispeed multistage gearbox.

References

  1. Dhruv Wadhwa, Harsh Patel, Heel Patel, Parth Trivedi, Jay Mandalia "A Review on Reduction Box", International Journal of Advance Research in Engineering, Science &Technology e-ISSN: 2393-9877, p-ISSN: 2394-2444 PP 677-685 Volume 5, Issue 3, March-2018
  2. V. Rajaprabakaran, Mr. R. Ashokraj Spur Gear Tooth Stress Analysis and Stress Reduction, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684, p-ISSN: 2320-334X PP 38-48
  3. Pradeep Kumar Singh, Manwendra Gautam, Gangasagar and ShyamBihariLal, Stress Analysis Spur Gear Design by Using Ansys Workbench, International Journal of Mechanical Engineering and Robotics Research ISSN 2278 – 0149 Vol. 3, No. 3, July 2014
  4. C. Veeranjaneyulu, U. HariBabu Design and Structural Analysis of Differential Gearbox at Different Loads, International Journal of Advanced Engineering Research and Studies E-ISSN2249–8974
  5. Sameer Chakravarthy N and B Subbaratnam, Finite Element Analysis and Fatigue Analysis of Spur Gear under Random Loading, International Journal of Mechanical Engineering and Robotics Research ISSN 2278 – 0149, Vol. 3, No. 4, October 2014
  6. Jiri Tuma, Gearbox Noise and Vibration Prediction and Control, International Journal of Acoustics and Vibration, Vol. 14, No. 2, 2009
  7. Unnati Joshia, Sankalp Bhatiya, Keval Dalwadi Design of Extruder Helical Gearbox, IJARIIE-ISSN Vol-2 Issue-3, PP 483-487, 2016
  8. Bernd-Robert Höhn, Klaus Michaelis and Michael Hinterstoiber, Optimization of Gearbox Efficiency, Optimiranje, ISSN 0350-350X GOMABN 48, 4, 441-480, PP 462-480, 2009
  9. Rahul Mokal, R.V. Mulik, S.B. Sanap, Design and Analysis of Gearbox for Tractor Transmission System, International Engineering Research Journal (IERJ) Special Issue 2 Page 4549-4553, 2015
  10. Aishwarya Dhawad, Dushyant Moghe, Gautam Susheel, Gaurav Bhagat, Design of a Multispeed Multistage Gearbox, Int. Journal of Engineering Research and Applications www.ijera.com ISSN: 2248-9622, Vol. 6, Issue 5, pp.54-57, May 2016
  11. Jianxing Zhou, Wenlei Sun, and Qing Tao, Gearbox Low-Noise Design Method Based on Panel Acoustic Contribution, Hindawi Publishing Corporation Mathematical Problems in Engineering Volume 2014, Article ID 850549, 10 pages
  12. Pratik Gulaxea, N. P. Awate, Design, Modeling & Analysis of Gearbox for Material Handling Trolley: A Review, P. Gulaxea, N. P. Awate / Mechanica Confab, Vol. 2, No. 1, PP 63-70, January 2013
  13. Parth B. Shah, Chandresh Motka, Analysis & Optimization of Gearbox Efficiency- A Review, IJIRST –International Journal for Innovative Research in Science &Technology Volume Issue 8 PP 14-16, January 2015
  14. Neeraj Patel, Tarun Gupta, Aniket Wankhede, Vilas Warudkar, Design and Optimization of 2-Stage Reduction Gearbox, IJEDR Volume 5, Issue 2, PP 541-552
  15. Venu Akhil Kumar Parakala, Lucky Purushwani, Design and Analysis of 2 - Speed gearbox for Bicycles, IPASJ International Journal of Mechanical Engineering (IIJME) Volume 3, Issue 7, PP 5-11, July 2015
  16. Syed Ibrahim Dilawe, Md. Abdul Raheem Junaidi, Dr. S. Nawazish Mehdi, Design, Load Analysis and Optimization of Compound Epicyclic Gear Trains, American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320-0936 Volume-02, Issue-10, pp-146-153
  17. B. Venkatesh, V. Kamala, A.M.K. Prasad Design Modelling and Manufacturing of Helical Gear, International Journal of Applied Engineering Research, Dindigul Volume 1, No1, Issn - 0976¬4259, Pp 103-114, 2010
  18. Ram Kumar Kunjam, Prakash Kumar Sen, Review on Analysis and Modification of Spur Gear Design, IJIRT Volume 2 Issue 5, ISSN: 2349-6002, PP 91-95, October 2015

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2018-04-30

Issue

Volume 4, Issue 4, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Heel Patel, Dhruv Wadhwa, Harsh Patel, Parth Trivedi, Jay Mandalia "Design & Manufacturing of Reduction Box" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 4, Issue 4, pp.1215-1227, March-April-2018.