A Review on Total Productive Maintenance

Authors

  • R. V. Paropate  Assistant Professor (Mechanical Engineering), Jawaharlal Darda Institute of Engineering & Technology, Yavatmal, Maharashtra, India
  • Dr. R. U. Sambhe  Professor and Head (Mechanical Engineering), Jawaharlal Darda Institute of Engineering & Technology, Yavatmal, Maharashtra, India

DOI:

https://doi.org//10.32628/IJSRSET2072101

Keywords:

TPM, OEE, SME, TQM

Abstract

Total productive maintenance (TPM) is the methodology aims to improve the accessibility of equipment and in consequence improve the further capital investment. Objectives of TPM are zero breakdowns, zero losses, zero defects and zero health hazards and hence increase quality and productivity in industries. This paper gives a literature review of ten papers on the total productive maintenance (TPM). Calculation of Overall Equipment Effectiveness (OEE) helps to find the machine performance. The literature review indicates that, Total Productive Maintenance is being adopted across many organizations in the India enhancing the productivity and efficiency of manufacturing.

References

  1. Willmott, P. (1994) ‘Total quality with teeth’, The TQM Magazine, Vol. 6, No. 4, pp 48–50.
  2. Ahuja I.P.S., Khamba J.S.(2008), “Total productive maintenance implementation in a manufacturing organisation”, International Journal of Productivity and Quality Management, Vol. 3, No. 3,pp. 360-381.
  3. Shelke G.D. , Javed M. , Walde S.D. (2019), “Implementation of Total Productive Maintenance in Automotive Chain Manufacturing Industry: A Case Study “, International Journal of Science and Research (IJSR), Vol. 8 No. 2, pp 1339-1345.
  4. Venkateswaran N (2017), “Total Productive Maintenance (TPM) Practices Adopted at Manufacturing Unit: An Analysis.” , Arabian Journal of Business and Management Review, ISSN: 2223-5833, Vol. 7, No.4 , 1000313, pp 1-6.
  5. Kumar D.,Kumar D., Rawat R.(2014), “Methodology used for improving overall equipment effectiveness by Implementing Total Productive Maintenance in plastic pipe manufacturing industries” International Journal Of Modern Engineering Research (IJMER), Vol. 4 No.9,pp6-12.
  6. Singh, R., Gohil, A.M., Shah D.B. , Desai, S. (2013), “Total productive maintenance (TPM) implementation in a machine shop: a case study”, Chemical, Civil and Mechanical Engineering Tracks of 3rd Nirma University International Conference on Engineering (NUiCONE 2012), Vol. 51, Procedia Engineering, pp. 592-599.
  7. Nishal M., Ramprasad K., Arun Theja A. J., Saravanan S. A., Abishek S. (2018), “Need For Total Productive Maintenance In SME And Barriers In Implementing TPM In SME”, International Journal Of Mechanical And Production Engineering,Vol. 6, No.6, pp 15-20.
  8. Patil J., Raut N. (2019), “Study Of Total Productive Maintenance And Improving The Production”, International Journal of Research and Analytical Reviews,, Vol. 6, No. 1,pp519-522.
  9. Dr. Kedar A. P.,Borikar V. N.,( 2016), “Critical Success Factors for Effective Implementation of TQM & TPM”, International Journal for Innovative Research in Science & Technology,Vol. 2, No. 09 ,pp160-164.
  10. Vigneshwaran S. , Maran M., Manikandan G.(2015), “Impact of TPM Implementation: Literature Review and Direction”, International Journal of Innovative Science, Engineering & Technology, Vol. 2 No. 12,pp. 114- 120.
  11. Ahmed S., Hassan M. H.,Taha Z, (2005),"TPM can go beyond maintenance: excerpt from acase implementation", Journal of Quality in Maintenance Engineering, Vol. 11 Iss: 1 pp. 19 – 42.
  12. Gupta A.K., Dr. Garg R. K.,(2012), “OEE Improvement by TPM Implementation: A Case Study”, International Journal of IT, Engineering and Applied Sciences Research (IJIEASR), Volume 1, No. 1,pp 115-124.
  13. Kocher G., Kumar R., Singh A., Dhillon S.S.(2012), “An Approach for Total Productive Maintenance and Factors Affecting its Implementation in Manufacturing Environment” , International Journal on Emerging Technologies, Vol.3, No.1,pp 41-47.
  14. J. Venkatesh, (2007), “An Introduction to Total Productive Maintenance”, The Plant Maintenance Resource Center, http://www.plant-maintenance.com/articles/tpm_intro.pdf

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2020-04-30

Issue

Volume 7, Issue 2, March-April-2020

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
R. V. Paropate, Dr. R. U. Sambhe, " A Review on Total Productive Maintenance, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 7, Issue 2, pp.527-530, March-April-2020. Available at doi : https://doi.org/10.32628/IJSRSET2072101