Design and Fabrication of Low Cost Dual Extruder Fused Deposition Modeling 3D Printer

Authors

  • Mohammed Amaanuddin  UG Student, Department of Mechanical Engineering, Lords Institute of Engineering and Technology, Osmania University, Telangana, TS, India.
  • Sayyed Areeb Ul Hasan  UG Student, Department of Mechanical Engineering, Lords Institute of Engineering and Technology, Osmania University, Telangana, TS, India.
  • Samatham Madhukar  Assiatant Professor, Department of Mechanical Engineering, Lords Institute of Engineering and Technology, Osmania University, Telangana, TS, India.
  • Dr. Syed Azam Pasha Quadri  Professor & HOD, Department of Mechanical Engineering, Lords Institute of Engineering and Technology, Osmania University, Telangana, TS, India.

Keywords:

3D Printer, Fused Deposition Modelling, Additive Manufacturing

Abstract

The inspiration for this project comes from the fact that 3D printer is really innovative and revolutionary idea but along with that they are very costly, one cannot afford the 3D printer just for fun or to use at home just to create ideas into reality. One can create an affordable 3D printer by using equipment in their surrounding or probably at home. The technology of 3D printing can be used to create imagination into reality, parts of the machinery of equipment which are not available in the market, prototypes of new ideas and most importantly for fun. Due to higher prices, its access to world is very limited but through this work there will be an increase in the access of 3D printers. Obviously, this isn't going to be fancy but it will show the basics of how the 3D printer works. In the current work the Design and Fabrication of Dual Nozzle Fused Deposition Modelling 3D Printer is developed at low cost.

References

  1. Y. K. Varma, S. Madhukar, B. Akhil, P.S. Kumar, Future of manufacturing technology rapid prototyping technique, Int. J. Mech. Eng. Technol. 7 (2016) 117–126.
  2. M.M. Mille, K.T. Griffin, R. Maass-Moreno, C. Lee, Fabrication of a pediatric torso phantom with multiple tissues represented using a dual nozzle thermoplastic 3D printer, J. Appl. Clin. Med. Phys. 21 (2020) 226–236. https://doi.org/10.1002/acm2.13064.
  3. B. Li, J. Liu, H. Gu, J. Jiang, J. Zhang, J. Yang, Structural Design of FDM 3D Printer for Low-melting Alloy, IOP Conf. Ser. Mater. Sci. Eng. 592 (2019). https://doi.org/10.1088/1757-899X/592/1/012141.
  4. C. Case, L.S.R. Krishna, A.R. G, B.S. V, S. Venkatesh, Application of 3D Printing For Building Prototype Model of Osmania Application of 3D Printing For Building Prototype Model of Osmania University Arts College – A Case Study, (2018).
  5. R. P?curar, V. Buzil?, A. P?curar, E. Gu?iu, S. Dan Stan, P. Berce, Research on improving the accuracy of FDM 3D printing process by using a new designed calibrating part, MATEC Web Conf. 299 (2019) 01007. https://doi.org/10.1051/matecconf/201929901007.
  6. V.G. Surange, P. V Gharat, Using Fused Deposition Modelling (FDM) Vinod, Int. Res. J. Eng. Technol. 3 (2016) 1403–1406.
  7. K. Kun, Reconstruction and development of a 3D printer using FDM technology, Procedia Eng. 149 (2016) 203–211. https://doi.org/10.1016/j.proeng.2016.06.657.
  8. A. Dine, E. Bentley, L.A. PoulmarcK, D. Dini, A.E. Forte, Z. Tan, A dual nozzle 3D printing system for super soft composite hydrogels, HardwareX. 9 (2021) e00176. https://doi.org/10.1016/j.ohx.2021.e00176.
  9. R. Polak, F. Sedlacek, K. Raz, Determination of fdmprinter settings with regard to geometrical accuracy, Ann. DAAAM Proc. Int. DAAAM Symp. (2017) 561–566. https://doi.org/10.2507/28th.daaam.proceedings.079.
  10. X. Zhang, J. Chu, S. Wei, Design and Simulation of Multi-nozzle FDM 3D printer for fabricated Solar thin-film cells, IOP Conf. Ser. Earth Environ. Sci. 585 (2020). https://doi.org/10.1088/1755-1315/585/1/012022.
  11. T. Kuipers, W. Elkhuizen, J. Verlinden, E. Doubrovski, Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling, Comput. Graph. 74 (2018) 23–32. https://doi.org/10.1016/j.cag.2018.04.006.
  12. S. Madhukar?, B.R. Harshith Reddy, G.A. Kumar, R.P. Naik?, A Study on Improvement of Fatigue Life of materials by Surface Coatings, Int. J. Curr. Eng. Technol. 8 (2018) 5–9. https://doi.org/10.14741/ijcet.v8i01.10878.

International Journal of Scientific Research in Science, Engineering and Technology

Downloads

Published

2021-08-30

Issue

Volume 8, Issue 4, July-August-2021

Section

Research Articles

License

Copyright (c) IJSRSET

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Mohammed Amaanuddin, Sayyed Areeb Ul Hasan, Samatham Madhukar, Dr. Syed Azam Pasha Quadri "Design and Fabrication of Low Cost Dual Extruder Fused Deposition Modeling 3D Printer" International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 8, Issue 4, pp.28-34, July-August-2021.